Lawn Chief Parts

This replacement part is an adjuster kit. It is a genuine replacement part made by MTD. This adjuster kit is typically found in lawnmowers and is responsible for assisting the user in changing the height of the blades so that the user may determine the setting which the grass is cut at. A new adjuster kit might be needed if the user is unable to adjust the height of the blades and therefore cannot perform the necessary duties. If the blades are stuck at one height it is possible that the adjuster kit is to blame. Because this part is located close to dangerous objects it is recommended that work gloves be worn for protection. This is a genuine OEM replacement part to ensure proper fit and long-lasting use. Note that part is sold individually and is sourced directly from the manufacturer.

This is a genuine replacement flat idler pulley used in snowblowers. The idler pulley applies tension to the belt, allowing the belt to turn. If the pulley is causing loud noises or is seizing up, which can cause the belt to break, a replacement may be necessary. A broken belt will cause a snowblower to be unusable.The process for replacing this part will vary depending on the model of the snowblower, so consult the equipment's manual and diagrams for specific instructions. For all replacements, a wrench and/or a socket set of the correct size depending on the machine is needed. Dependent upon the repair needed, bearings and bushings may also need replacement, they are not included and must be bought separately. This is a genuine MTD replacement part. This replacement flat idler pulley is compatible with Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, and Yard-Man brands.

This genuine OEM replacement part idler pulley plays an important part on many lawn tractors, mowers, and snowblowers. It drives the engine's belt system, particularly the belts connected to the crankshaft. It helps to create motion throughout the engine, including in the steering pump, air compressor, and the alternator. Therefore, without this pulley, the engine will not function properly. As with any part of an engine, an idler pulley will begin to wear down over time. When this happens, an idler pulley will begin slipping, causing the belts to no long run smoothly. If an idler pulley breaks completely, the engine will not start. Before replacing an idler pulley, be sure to let the engine cool completely, as you will have to remove several parts with a screwdriver and socket wrench set. This idler pulley will work with Troy-Bilt, Yard Machines, MTD, Cub Cadet, and Yard Man appliances. It is a high-quality replacement part sourced directly from the original manufacturer. This part ships individually.

This pulley is a genuine MTD part, sold individually. This pulley can be used as a replacement part in a lawn mower or a wood chipper. The purpose of this pulley in a lawn mower or a wood chipper is to allow the spindle to rotate so that the blades of the lawn mower can rotate and facilitate the fine chopping of wood or mowing of greenery on a variety of surfaces when the appliance is in operation.The pulley in a lawn mower or a wood chipper might need to be replaced if the pulley can no longer regulate the rotation of the spindle assembly. This could occur if the pulley is dented, cracked, warped, eroded, or otherwise damaged to the point of reduced or no functionality; if this occurs, the pulley should be removed and replaced by this genuine OEM replacement part in accordance with the proper set of instructions sourced from a relevant appliance manual or handbook.This is a genuine OEM from the manufacturer. It is sold individually. This pulley is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Murray, Yard Machines, Huskee, Montgomery Wards, Yard Man, Turf King, and MasterCut.

This replacement part is a pulley, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This pulley is specifically found in lawn mowers and is an essential part of the mechanisms inside the device. A pulley allows two things to be looped together and is responsible for the type of force that is used inside the engine. A new pulley might be needed if the current one is damaged or broken. Be sure the actual pulley is the faulty part rather than the belt or other parts around it. Because the pulley deals with so much friction overtime, it is commonly replaced due to being stripped down. Be sure the engine is cooled off as the pulley and surrounding parts are usually hot because of friction.This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This part is a replacement auger pulley. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective auger pulley in snow blowers.The auger pulley rotates the snow blower's auger blades by connecting the auger gearbox to the equipment's drive belt. This part is critical for proper functionality and thus will require replacement if faulty. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this auger pulley, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This auger pulley can be used with different models of snow blowers that have been manufactured by MTD, Craftsman, Ryobi, and other brands. Part sold individually.

This part is a replacement mandrel pulley. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective mandrel pulley in a variety of lawn tractor models.The mandrel pulley is an essential component of the equipment as it rotates the lawn tractor's blade. If this part is broken or in any way defective, the blade may not spin and the equipment will be rendered ineffective. When working on or near any mechanical equipment, it is important to verify that it is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this mandrel pulley, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this mandrel pulley is suitable for use on several different models of lawn tractors manufactured by MTD, Craftsman, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This is a genuine OEM engine pulley sourced directly from the manufacturer for use on tiller engines and other engines with a pull start. The starter cord is attached to a pulley that has a spring for rewinding the cord after the engine starts. If the engine pulley is damaged due to rust or corrosion and the string won't pull, the engine won't start. The pulley may make screeching or whining sounds when pulled, this is one way to recognize that the pulley is beginning to go bad and should be replaced soon.Before replacing the pulley, make sure the engine is cool and remove the spark plug. Remove the starter housing to access the rope starter and pulley. Disassemble the pulley system and discard the old pulley. Reinstall the new pulley and thread the starter cord back around it. Reassemble the housing and put the spark plugs back so that you can test the starter. This engine pulley is made of heavy-duty steel and sold as an individual unit. It is designed to be compatible with small engines manufactured by Craftsman.

This engine pulley outer half is a genuine MTD part, sold individually. This engine pulley outer half can be used as a replacement part for a tiller. The purpose of an engine pulley outer half is to function in conjunction with the engine pulley inner half to form the pulley for a tiller, which affixes to the crankshaft and facilitates the driving of the belt.The engine pulley outer half might have to be replaced at some point in the lifespan of a tiller if the component is not functioning as it usually does. This could occur if the component suffers damage in the form of puncturing, cracking, breaking, or eroding. If this occurs, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This engine pulley outer half is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Huskee, Bolens, Yard Man, and MasterCut.

This replacement part is a pulley. This is a genuine replacement part made by MTD. This part is able to connect multiple pieces together so they can operate smoothly during use. This enables certain parts to work together and run smoothly and effectively over time.A new pulley might be needed if the current one has become worn down or damaged. Pulleys typically experience a large amount of friction during use and can eventually begin to malfunction. If the user notices unusual noises coming from the inside of the machine, it can be due to a pulley that needs attention. Work gloves are recommended during this repair to ensure safety. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is an MTD drive pulley. The drive pulley sends power from the engine to the transmission, propelling the lawn mower forward or backward. This propelling is done through the use of a drive belt and drive pulley. When the drive pulley malfunctions on a lawn mower, it loses the ability to send power from the engine to the transmission. This prevents the lawn mower from being able to move forward or backward. Typically the mower will continue to start; however, engaging the gears will not trigger a response. Start the drive pulley repair by removing the deck of the lawn mower. Always make sure the battery is disconnected. Loosen the transaxle pulley with a socket wrench. Relieve tension from the upper drive belt by disconnecting the spring from the anchor rope. Remove the upper drive belt and lawn mower belt guide. Take the belt off the variable speed pulley and remove the belt securing the crankshaft pulley. Repeat these steps in reverse to install the new pulley.This part is compatible with Craftsman, MTD, Troy-Bilt, and Yard-Man brand lawn mowers. It is sourced directly from the manufacturer as a genuine OEM part

This is a deck pulley that can work as a replacement for a range of lawn tractors. The pulley is used to help spin the blades on the tractor's mower deck. If the pulley has been damaged or is broken, the blades will not spin, which means the tractor can't cut the lawn. This will significantly reduce the functionality of the tractor.The deck pulley tends to be durable, but it could need to be replaced at some point. It might break, or it might become stripped. This could cause the belt to snap eventually. Replacing the part is essential. An impact driver and a 7/8 socket are needed to complete this project. Wait for the tractor to cool before starting a repair.This deck pulley can work with select models of lawn tractors from MTD, Troy-Bilt, Yard-Man, Yard Machines, and Bolens. The pulley is sold individually. This is an authentic OEM replacement deck pulley that has been sourced from the manufacturer.

This locking rod is a genuine MTD part, sold individually. This locking rod can be used as a replacement part in a log splitter. The purpose of a locking rod in a log splitter is to serve as a fastening component that holds one or more parts together.The locking rod in a log splitter might need to be replaced with this genuine OEM replacement part at some point within the typical lifespan of the appliance. This could occur if the locking rod is damaged in the form of puncturing, scraping, denting, cracking, eroding, or warping. If this occurs, the locking rod should be immediately replaced in accordance with the proper set of instructions sourced from a relevant appliance manual.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This locking rod is compatible with the following outdoor appliance brands: MTD, Yard Man, Ryobi, Cub Cadet, Craftsman, and Yard Machines.