Leaf Blower Control Cable

This is a lever set assembly that is used with many types of leaf blowers for use in the yard and garden. It is located near the throttle cable on the equipment. The purpose of a lever set assembly is to engage the throttle cable. This causes the carburetor to open so that additional air and fuel will be sent into the cylinder. This is a durable assembly that has many parts. If the wires or other components are damaged, the lever set assembly will need to be replaced.A socket set and screwdriver will be needed to replace the lever set assembly on a leaf blower. Take the leaf blower and put it on a level surface after making sure it is powered off. To prevent any chance of the engine coming on, the spark plug wire should be disconnected. Remove the nuts holding the lever set in so it can be taken out. Replace with the new component.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The lever set assembly is made to be used with several leaf blowers made by Husqvarna.

This is a throttle control cable that connects the throttle lever to the engine carburetor on outdoor power equipment. It regulates engine speed by controlling the throttle plate position when the operator adjusts the lever. Replace this cable if the engine does not respond to throttle input, the cable is frayed or kinked, or the throttle lever feels loose or stuck.

This speed control cable connects the handle-mounted speed lever to the drive system on a self-propelled lawn mower. It allows the operator to adjust ground speed by transmitting input from the control lever to the transmission. Replace this cable if the mower no longer responds to speed adjustments, the cable is frayed or kinked, or the self-propel function is intermittent.

Replace your lawn mower's engine zone control cable. Installs between handle and engine to engage/disengage blade operation. Order new cable if broken or frayed.

Replacement control cable that connects operational levers or handles to internal mechanisms. Needed when your existing cable is frayed, broken, or detached.