Parts for Kenmore 790.40252412 (79040252412, 790 40252412): Lower Oven Parts

Replacement oven rack for wall ovens. Provides a platform for organizing and baking food. Replace if warped, bent, or no longer sits securely on glides.

This is a flexible gasket that fits around the perimeter of the oven door, creating an airtight seal between the door and the oven cavity. It prevents heat from escaping during cooking and baking cycles. Replace this seal if you notice heat leaking from around the oven door, uneven cooking temperatures, or if the seal appears cracked, brittle, or deformed.

This is a door-activated switch that detects whether the oven door is open or closed. It controls functions such as the oven light or signals the control board about door position. Replace this switch if the oven light stays on or off regardless of door position, or if the oven does not operate correctly due to a faulty door signal.

The Range Lamp Assembly is an OEM part for Frigidaire stoves and ranges. It consists of the halogen light bulb, lens cover, and wiring harness necessary to illuminate the oven cavity. This lamp assembly provides light to the cooking and baking space, making it easier to view food and monitor cooking progress.  

Symptoms of a bad range lamp assembly include:

• The oven light not turning on at all  
• Dim, flickering, or intermittent light
• Burned out or blown light bulb
• Cracks or damage to the lens cover

Causes of failure can be a burned out light bulb, broken wiring, or damage from impact or heat over time. 

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Replace a cracked, broken, or missing oven door spacer that maintains proper alignment and gap between door components. Installs in door assembly.

Oven won't reach or hold set temperature? A faulty temperature sensor causes inaccurate heating. This monitor probe ensures consistent cooking results.

This decorative trim bezel restores the finished appearance of the appliance's front and helps protect internal edges from dirt and damage. It matches the OEM shape and finish for a factory look. What it does:

• Covers and protects the appliance front edge where panels meet, preventing dirt and debris buildup
• Restores a clean, finished appearance after dents, chips, or missing trim
• Helps maintain proper alignment of adjacent panels and controls
• Visible cosmetic part — replacement resolves appearance issues and exposed edges

• One decorative trim bezel

• Disconnect power to the appliance before starting any repair
• Installation typically requires removing adjacent panels or control housings; keep track of fasteners
• Handle edges carefully to avoid cuts and to prevent scratching the finish
• If trim does not seat easily, check for damaged clips or misaligned panels before forcing

This door trim panel restores the finished exterior around the appliance door for a clean, factory look. It replaces damaged or worn trim to improve appearance and help keep the door edges sealed. What it does:

• Covers and protects the door edge, hiding fasteners and gaps for a finished appearance
• Helps maintain a consistent door fit and seal by replacing warped or damaged trim
• Typical symptoms: cracked, chipped, dented, loose, or missing trim that affects appearance or leaves exposed edges
• Matches OEM fit and finish when installed per the original door assembly

• Disconnect power to the appliance before beginning any repair and work with the door supported
• Removal may require loosening adjacent trim pieces or fasteners—keep track of any screws or clips
• Handle edges carefully to avoid scratching the new trim; use appropriate trim or panel tools

This decorative door trim is a direct-fit replacement that restores the appliance's exterior finish and covers the door edge for a clean, factory appearance. Ideal when existing trim is cracked, dented, or cosmetically worn. What it does

• Replaces damaged or missing door trim to restore the appliance's finished look
• Hides edge gaps and covers mounting area for a seamless appearance
• Helps prevent dirt and moisture from collecting in exposed edge areas
• Fits where the OEM trim has become cracked, warped, or cosmetically damaged

• One decorative door trim piece

• Designed for direct replacement;
• Use basic hand tools; avoid overtightening fasteners to prevent cracking
• Disconnect power and empty door-mounted items as appropriate before servicing
• If trim covers fasteners or clips, keep removed hardware for reassembly

The Terminal Block Kit is an OEM part for Frigidaire appliances, typically used for connecting house power to various electrical appliances like ranges and dryers. This kit includes includes screws, nuts, and a unique terminal block. It plays a critical role in the power supply system by providing a reliable connection point for the appliance's main power cord, preventing loose connections and potential electrical hazards.

Symptoms of a bad Terminal Block Kit include:

• Signs of burning or melting at the connection points,
• Flickering power or intermittent operation of the appliance,
• A burning smell from the appliance area.

Causes of terminal block failure often involve loose connections that can lead to arcing and overheating, improper installation, or general wear and tear that degrades the integrity of the electrical contacts.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This is an electric heating element mounted at the top of the oven cavity that provides heat for broiling. It glows red when energized and delivers high, direct heat to the top surface of food. Replace this element if the broiler no longer heats, heats unevenly, has visible damage such as cracks or blistering, or if the oven trips a breaker when broil mode is selected.

Oven not heating or baking unevenly? This bake element restores proper baking heat. Replaces burned-out elements to maintain consistent temperatures.

Secures cooktop surface elements to your range for stable contact and even heating. Replace if bent or worn to restore proper element positioning.

Heat shield for ranges and wall ovens. Protects internal components from excessive heat. Replace if cracked, warped, or damaged to prevent overheating.

Receptacle for electric and gas ranges and wall ovens. Installs as a connector component. Replace if cracked, damaged, or missing to restore proper fit.

This mounting bracket secures appliance panels or components to the cabinet, restoring proper alignment and stability for safe, quiet operation. It's a direct-fit replacement designed to hold parts firmly in place. What it does:

• Provides a stable mounting point to keep panels, assemblies, or components aligned
• Prevents movement that can cause rattling, vibration, or rubbing against other parts
• Restores correct spacing to help doors and panels close and seal properly
• Helps maintain structural support after damaged or corroded brackets are removed

• Disconnect power to the appliance before beginning any repair
• Remove adjacent panels or trim as needed to access the bracket; keep hardware for reuse unless replacing
• Use the same screw locations and torque as the original part; do not overtighten
• If visible damage or additional loose components are found, inspect surrounding fasteners and supports

Vent adapter assembly installs in the oven cavity to connect ventilation ducts. Replace if cracked, damaged, or missing to restore proper airflow.

Positions and supports range components to maintain proper alignment. Replace if cracked, broken, or missing to prevent rubbing and ensure panels fit correctly.

Fix intermittent or failed component operation with this wiring harness assembly. Restores reliable electrical connections between range components.

Mounting screw for electric and gas ranges. Secures internal components and panels. Replace if stripped, missing, or damaged during appliance maintenance.

This is a metal mounting bracket used to secure an over-the-range microwave to the wall or cabinet during installation. It provides structural support and helps keep the microwave properly aligned and stable. Replace this bracket if it is bent, broken, or missing, which can cause the microwave to sit unevenly or become unsafe.

Hex flange nut with 10-32 thread secures components in appliances. Replace if stripped, missing, or damaged. Flange provides broader bearing surface.

Replacement mounting screw for range power and control boards. Secures electrical board connections. Needed when original screw is missing or damaged.

Replacement mounting screw for ovens and ranges. Secures panels, brackets, trim, and internal components. Replace missing or stripped screws to restore fit.

This harness assembly is the appliance wiring connector bundle that carries power and signals between controls and components, restoring proper electrical connections for normal operation. What it does:

• Routes power and control signals between the control board and key components
• Replaces damaged, burned, or loose wiring that can cause intermittent operation
• Helps resolve symptoms like unresponsive controls, failure to start, or component loss of power
• Restores factory wiring layout and connector fit for reliable connections

• Disconnect power before starting; confirm power is off at the breaker
• Compare connectors and wire colors to the old harness before removal
• Route and secure harness to avoid heat or pinch points; use existing clips/mounts

Spacer that maintains proper gap between components in your range or oven assembly. Replace if missing, worn, or damaged to restore correct fit and alignment.

Replacement screw secures panels, trim, and internal components in your appliance. Needed when original fastener is missing, stripped, or damaged.

Illuminates your oven interior for visibility while cooking and cleaning. Replace when burned out to restore lighting. Verify fit with your model number.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.