Parts for Ge CDT725SSF4SS: Lower Rack Assembly Parts

The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth.

Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes.

As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces

The coated tines is an OEM part for GE dishwashers. Acting as the separator between dishes and silverware, the tines are responsible for keeping cutlery in place during the wash cycle while allowing for full access of water and spinning. 

Causes of badly coated tines can include corrosion or rusting over time due to wear and caustic chemicals, or damage and bending due to frequent loading or unloading of dishes. 

Symptoms of badly coated tines include:

• Cutlery clumping together instead of being properly separated
• Tines broken, bent, or missing entirely
• Poor wash performance due to inability to properly separate and distribute water 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Folding Tine Row is an OEM replacement part for GE dishwashers. Located along the lower rack, it contains movable plastic tines that flex to accommodate varying dish sizes and configurations. Proper functioning tines are essential for optimizing wash coverage and cleaning results. 

Causes of a bad folding tine row include cracked or broken plastic from years of repeated movement. Mineral buildup may cause tines to become rigid or stuck over time as well.

Symptoms include: 

• Inability to fit larger pots, pans, or casserole dishes  
• Items not getting fully washed due to restricted spray access
• Food particles or residue left behind in hard-to-reach areas  
• Warped or misaligned tines that snag during loading/unloading

Compatible models include Hotpoint, RCA, and some Kenmore dishwashers. 

The Folding Tine Row is an OEM part for GE dishwashers. Located on the bottom dish rack, it functions to fold down during wash cycles for improved water coverage beneath flatware and smaller items.

Causes of a bad folding tine row can include broken or cracked tines from years of repeated folding motions. Mineral accumulation on hinge points may also affect smooth operation.

Symptoms of a bad Folding Tine Row include:

• Inability to fold down or remain in the folded-down position
• Improper water coverage for small plates and utensils on the bottom rack
• Items not getting thoroughly washed beneath the tine area
• Loose fasteners or components that create noise during cycling

This GE OEM replacement part is also compatible with Hotpoint, RCA, and select Kenmore dishwashers.

The Folding Tine Row Clip is an OEM part for GE dishwashers. It is located on the side of the dishwasher's lower rack and holds the folding tine row securely in position. It ensures that the folding tines, which can be adjusted to accommodate different dish sizes, remain stable during the wash cycle.

Causes of a faulty or damaged folding tine row clip can include regular use, wear and tear, or breakage. These factors can result in issues such as the folding tine row becoming loose or unstable, difficulty in adjusting the tines, or the tines not staying in the desired position.

Symptoms of a bad folding tine row clip may include:

• The folding tine row becoming loose or falling out of place
• Difficulty in adjusting the tines or keeping them in position
• Unstable or wobbly tines during the wash cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This Fold Down Tine Indexer is an OEM part for GE dishwashers. It plays a crucial role in the flexibility and organization of the dishwasher's rack system. This indexer allows for the fold-down tines in the dishwasher rack to be adjusted or locked into place, providing customizable loading options for different sizes and types of dishes.

A malfunctioning indexer can limit the flexibility of the dishwasher rack, making it difficult to efficiently load various dishware.

Symptoms of a faulty Fold Down Tine Indexer include:

• Difficulty in adjusting or securing the fold-down tines in the dishwasher rack.
• Tines not staying in place, leading to inefficient dish loading.
• Breakage or visible wear of the indexer mechanism.
• Inability to accommodate different sizes or shapes of dishes effectively.
• Reduced overall efficiency in utilizing the space in the dishwasher rack.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This replacement lower dishrack restores smooth rolling and secure loading on the bottom level of your dishwasher, helping plates, bowls, and pots stay in place for consistent spray coverage and reliable cleaning results. What it does

• Organizes and supports dishes, cookware, and utensils on the lower level during wash and dry cycles
• Rolls in and out on the tub rails for easy loading and unloading
• Positions items for effective spray coverage and drainage
• Replace if tines are broken, coating is peeling/rusting, the rack derails or won't roll smoothly, or items tip over

• One lower dishrack

• Turn off power to the dishwasher before servicing
• Pull the old lower rack straight out; release/remove any rack stops if present
• Transfer any removable accessories from the old rack (such as utensil basket or clips), if needed
• Slide the new rack onto the rails and verify smooth operation

Restore smooth, dependable rack movement. This kit replaces worn carriers and rollers so the lower dishrack glides in and out without binding, derailing, or dropping.

What it does

• Supports and guides the lower rack along the tracks
• Replaces broken, missing, or flat-spotted wheels and cracked carriers
• Helps prevent the rack from popping off the rails during loading
• Reduces drag that leads to stiff, uneven rack travel

What’s included
Four carrier brackets, four roller wheel brackets (covers), and eight wheels — a complete set of four assemblies.

Install notes

• Disconnect power before servicing the rack area.
• Pull the lower rack out; swap one assembly at a time to match left/right orientation.
• Fully seat tabs/locks on each carrier; verify wheels roll freely.
• Best practice: replace all four together for even tracking, then run a quick test cycle.

The Lower Rack Roller is an OEM replacement part for GE dishwashers. This small but crucial component allows for smooth and effortless movement of the lower dish rack during loading and unloading.

Symptoms of needing to replace the lower rack roller include:

• Difficulty in sliding the lower rack in or out
• Excessive noise or grinding during rack movement
• The rack becoming stuck or not rolling smoothly
• Visible wear, cracks, or damage to the roller itself

Causes of a faulty lower rack roller can include normal wear and tear over time, exposure to heat or moisture, or physical damage due to impact or mishandling.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.

The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth.

Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes.

As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces

Restore smooth, dependable rack movement. This kit replaces worn carriers and rollers so the lower dishrack glides in and out without binding, derailing, or dropping.

What it does

• Supports and guides the lower rack along the tracks
• Replaces broken, missing, or flat-spotted wheels and cracked carriers
• Helps prevent the rack from popping off the rails during loading
• Reduces drag that leads to stiff, uneven rack travel

What’s included
Four carrier brackets, four roller wheel brackets (covers), and eight wheels — a complete set of four assemblies.

Install notes

• Disconnect power before servicing the rack area.
• Pull the lower rack out; swap one assembly at a time to match left/right orientation.
• Fully seat tabs/locks on each carrier; verify wheels roll freely.
• Best practice: replace all four together for even tracking, then run a quick test cycle.

Restore smooth, dependable rack movement. This kit replaces worn carriers and rollers so the lower dishrack glides in and out without binding, derailing, or dropping.

What it does

• Supports and guides the lower rack along the tracks
• Replaces broken, missing, or flat-spotted wheels and cracked carriers
• Helps prevent the rack from popping off the rails during loading
• Reduces drag that leads to stiff, uneven rack travel

What’s included
Four carrier brackets, four roller wheel brackets (covers), and eight wheels — a complete set of four assemblies.

Install notes

• Disconnect power before servicing the rack area.
• Pull the lower rack out; swap one assembly at a time to match left/right orientation.
• Fully seat tabs/locks on each carrier; verify wheels roll freely.
• Best practice: replace all four together for even tracking, then run a quick test cycle.

This SCR (silicon controlled rectifier) is a replacement power-control semiconductor used on select appliances. It regulates current flow so heating and motor circuits switch reliably for normal operation. What it does:

• Acts as a solid-state switch to control power to heaters or motors when signaled by the appliance control
• Helps enable proper on/off cycling and prevents uncontrolled current flow
• Commonly linked to symptoms such as no heating, intermittent operation, or failure to switch power
• Designed for mounting on a chassis or heat sink and wire-terminated via the stud connection

• One SCR

• Disconnect all power before starting work to avoid shock or injury
• Handle the part carefully; avoid touching semiconductor leads and follow electrostatic-discharge (ESD) precautions
• Confirm the part number on your appliance before ordering and compare terminal/stud fitment to the old unit

This front cover handle replaces a worn or broken handle on the appliance's front panel to restore a secure grip and normal operation. It matches the OEM shape and mounting points for a direct-fit replacement. What it does:

• Provides a sturdy grip to open and close the front panel or door
• Restores proper alignment and feel when the original handle is cracked, loose, or missing
• Helps prevent further damage to the front cover by re-establishing correct handle support
• Fits the factory mounting locations for a straightforward swap

• One front cover handle

• Disconnect power to the appliance before starting any repair to avoid shock
• Typical installation requires removing the front trim or panel; use basic hand tools
• Inspect surrounding trim and fasteners; replace any damaged clips or screws as needed

The Silverware Basket Assembly is an OEM replacement part for GE dishwashers. This basket is designed to hold and organize silverware and utensils during the dishwashing cycle. It ensures that utensils are properly spaced and positioned to receive optimal cleaning, preventing them from nesting together and ensuring thorough water circulation.

Over time, the silverware basket can become worn or damaged due to regular use and exposure to high temperatures and detergents. Cracks, breaks, or missing sections can occur, leading to utensils falling through or becoming improperly cleaned.

Symptoms of a bad silverware basket assembly include:

• Utensils falling through the bottom or sides of the basket
• Cracks, holes, or broken sections in the basket
• The basket not fitting securely in its designated place within the dishwasher
• Rust or discoloration affecting the basket's integrity

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Silverware Basket Assembly is an OEM replacement part for GE dishwashers. This basket is designed to hold and organize silverware and utensils during the dishwashing cycle. It ensures that utensils are properly spaced and positioned to receive optimal cleaning, preventing them from nesting together and ensuring thorough water circulation.

Over time, the silverware basket can become worn or damaged due to regular use and exposure to high temperatures and detergents. Cracks, breaks, or missing sections can occur, leading to utensils falling through or becoming improperly cleaned.

Symptoms of a bad silverware basket assembly include:

• Utensils falling through the bottom or sides of the basket
• Cracks, holes, or broken sections in the basket
• The basket not fitting securely in its designated place within the dishwasher
• Rust or discoloration affecting the basket's integrity

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Silverware Basket Assembly is an OEM replacement part for GE dishwashers. This basket is designed to hold and organize silverware and utensils during the dishwashing cycle. It ensures that utensils are properly spaced and positioned to receive optimal cleaning, preventing them from nesting together and ensuring thorough water circulation.

Over time, the silverware basket can become worn or damaged due to regular use and exposure to high temperatures and detergents. Cracks, breaks, or missing sections can occur, leading to utensils falling through or becoming improperly cleaned.

Symptoms of a bad silverware basket assembly include:

• Utensils falling through the bottom or sides of the basket
• Cracks, holes, or broken sections in the basket
• The basket not fitting securely in its designated place within the dishwasher
• Rust or discoloration affecting the basket's integrity

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Silverware Basket Assembly is an OEM replacement part for GE dishwashers. This basket is designed to hold and organize silverware and utensils during the dishwashing cycle. It ensures that utensils are properly spaced and positioned to receive optimal cleaning, preventing them from nesting together and ensuring thorough water circulation.

Over time, the silverware basket can become worn or damaged due to regular use and exposure to high temperatures and detergents. Cracks, breaks, or missing sections can occur, leading to utensils falling through or becoming improperly cleaned.

Symptoms of a bad silverware basket assembly include:

• Utensils falling through the bottom or sides of the basket
• Cracks, holes, or broken sections in the basket
• The basket not fitting securely in its designated place within the dishwasher
• Rust or discoloration affecting the basket's integrity

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Affresh Dishwasher Cleaner is an OEM accessory designed specifically for Whirlpool brand dishwashers. This citrus-scented tablet removes residue, odor-causing soils, and food particles from the dishwasher tub and gasket area during the cleaning cycle. Symptoms of a buildup include unwanted odors emanating from the dishwasher, especially after opening the door. Over time, residue and grime accumulate in hard-to-reach areas and provide an environment for mold and mildew growth.

Regular cleaning helps prevent this by removing leftover soils before they harden or encourage bacterial activity. The Affresh tablet utilizes a unique blend of cleaning ingredients that target soils and biofilms through a combination of powerful scrubbing action and natural cleaning enzymes.

As the #1 recommended dishwasher cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and select Kenmore dishwashers for consistent cleanliness and freshness. The package includes six tablets 4.2 ounces