Mastercut Parts

This genuine OEM replacement front adjustable deck rod is used on lawnmowers and tractors. The front of the cutting deck on the lawnmower or tractor is supported by an adjustable deck rod that stabilizes the deck. This rod may be adjusted to level the deck from front to back. It is suggested the front of the deck should be slightly lower than the rear of the deck. Through normal wear and tear on the mower, and frequent adjustment of the deck, this deck rod may wear and break. If the rod does break, the deck will become unlevel causing an uneven cut of your yard. The rod will then need to be replaced. Replacing the deck support rod is an intermediate-level job that will require the use of a socket wrench, as well as needle nose pliers. Before attempting to install the new support rod, the lawnmower will need to be parked on sturdy and ground. It may also be necessary to remove the fuel tank so the deck rod bracket can be accessed. Work gloves should be worn to complete this project in order to protect the user's hands. This replacement adjustable deck rod is compatible with MTD, Troy-Bilt, Yard-Man, Yard Machines, Toro, Husky, Poulan, and Cub Cadet models. This deck rod is sourced directly from the manufacturer and is sold individually.

This part is a deck lift rod that is used on lawn tractors and lawnmowers. This component is manufactured out of a high-quality metal material and is used to lift the deck.A new deck lift rod will be needed if the original is cracked, broken, or damaged in any way. This component may become worn or break after regular use over a period of time due to normal wear and tear. If this is the case, it will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This deck lift rod is a genuine MTD part. It is sold individually. This particular deck lift rod is compatible with lawn tractors and lawnmowers that are manufactured by MTD, Troy-Bilt, Yard-Man, White Outdoor, Craftsman, Columbia, and Murray.

This part is a replacement deck lift rod. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken deck lift rod in lawn tractors.The deck lift rod lowers and raises the tractor deck. If the rod is bent, dented, snapped, or otherwise rendered ineffective, it should be immediately replaced with a genuine OEM part. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular deck lift rod, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This deck lift rod can be used with a variety of lawn tractor models manufactured by MTD, Craftsman, and other brands.

This part is a replacement tie rod. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a damaged or dented tie rod in a variety of lawn tractor models. The tie rod is critical to the lawn tractor's steering system as it connects the steering arm to the wheel. If the tie rod is damaged the equipment may not be able to maneuver properly, which can pose danger to the user. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near to an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this tie rod, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this tie rod assembly is suitable for use on several different models of lawnmowers manufactured by MTD, Troy-Bilt, Yard Machines, Yard Man, Husky, and Ryobi. This is a genuine part made of high-quality, durable materials and is sold individually.

This spacer is a genuine MTD part, sold individually. This spacer can be used as a replacement part in lawnmowers, snowblowers, and wood chippers. This part assists in fastening two components together by creating a slight gap that reduces friction.The spacer might have to be replaced if it is lost, misplaced, or damaged from general wear and tear with long-term use. If the spacer is lost at some point within the typical operation of the appliance and its absence is noticed by the operator, the spacer should be replaced by this genuine OEM replacement part. If the spacer is damaged beyond functionality, the spacer should be immediately replaced. This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This spacer is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Huskee, Yard Machines, Montgomery Wards, Yard-Man, Turf King, and MasterCut.

This is a genuine replacement lower handle part. The lower handle is used on push lawn mowers. This handle connects the upper handle to the mower. This part should be replaced when there is damage to the bolt holes or if it is bent. It is not easily worn, and therefore does not have to be replaced often.To replace this part, a 7/16th inch wrench or a 9/16th inch socket wrench is needed. Remove the upper shoulder bolt to detach the upper handle. Remove the lower handle and place the new replacement part. Bolt the upper handle to the lower handle. On occasion, the bolt connecting the handles may need replacement if worn. Any new bolts will need to be purchased separately. Otherwise, previous bolts used on the worn lower handle can be reused. If the part is bent, replacement may require a mallet to dislodge or remove the damaged part. This is a genuine MTD replacement part. This part is compatible with most lawn mowers. This part is sold separately.

A lawn mower lower handle is exactly what it sounds like: a handle replacement part for different types of lawnmowers. It works with a variety of mowers, including push mowers, mulching mowers, and self-propelled lawnmowers. It designed for use and is compatible with these brands: Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut.The lawn mower lower handle allows the user to drive or guide the lawn mower. The replacement and repair process for a broken lower handle is relatively simple and straightforward. The user must simple remove the faulty handle and disassemble it into its two component pieces. Then, this lawn mower lower handle replacement part can be attached to the base of the mower.This lawn mower lower handle is made out of metal. It is a genuine OEM part sourced directly from the manufacturer and is sold individually. The manufacturer of this particular lower handle is MTD.

This upper handle can be used as a replacement part for a lawnmower or snowblower. The upper handle allows the user to control the movement of the equipment while it is in operation.If the part suffers damage from direct impact or wears down from use over time, it may need to be replaced. An upper handle can suffer damage in the form of piercing, cracks, scrapes, punctures, and corrosion of the metal material. If this damage makes steering the lawnmower or snowblower difficult, the handle should be removed and replaced with this genuine OEM replacement part before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This upper handle is a genuine MTD part, sold individually. It is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Yard Machines, Huskee, Craftsman, Yard-Man, and Bolens.

This fuel cap is a genuine MTD part, sold individually. This fuel cap can be used as a replacement part in a lawn mower, snowblower, or wood chipper. This fuel cap seals the fuel tank on these types of equipment.The fuel cap in a lawn mower, snowblower, or wood chipper might need to be replaced if the component is chipped, dented, punctured, or otherwise damaged. If this damage leads to a fuel cap through which materials can pass, the fuel cap should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This fuel cap is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, Turf King, and MasterCut.

This casing clamp is a genuine MTD part, sold individually. This casing clamp can be used as a replacement part in lawn mowers, snowblowers, and tillers. The purpose of a casing clamp for one of these outdoor appliances is to affix the governor control plate to the tank assembly so that it remains stably placed throughout the standard operation of the appliance.If the casing clamp is subject to damage in the form of puncturing, denting, cracking, warping, or eroding over time, it should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This casing clamp is compatible with the following outdoor appliance brands: MTD, Craftsman, Ryobi, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Huskee, Montgomery Wards, Yard Man, Bolens, and MasterCut.

This replacement part is a transmission kit. This is a genuine replacement part made by MTD. This kit is used to assist the transmission and allow it to work properly while the engine is in use. A new transmission kit might be needed if the engine is no longer starting as efficiently as before. This can be due to a worn down transmission and should be replaced as soon as possible. The transmission is a frequently used part in a machine and can easily become damaged after years of normal use. Be sure the engine is cooled off and shut down before attempting to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This pivot bar is a genuine MTD replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, and chipper shredders. The pivot bar provides a means of steering the outdoor appliance.A pivot bar might have to be replaced if it suffers damage over time. Although there is not often a need to replace a pivot bar, as it holds up well to general usage and exposure to the elements, a pivot bar might have to be replaced if there is a collision or a traumatic impact as a result of a drop from significant height or onto a particularly hard surface. Additionally, a pivot bar might have to be replaced if there is deterioration in the spindle bushing, thereby exposing the pivot bar to potential damage. If this occurs, a replacement pivot bar part should be ordered and secured to the small engine appliance immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This pivot bar is compatible with the following brands: MTD, Yard Man, Bolens, and Yard Machines.