Maytag Wall Oven Knob, Dial & Button

This is the thermostat knob that mounts on the control shaft so you can set the temperature. Replace a cracked, stripped, or missing knob to restore smooth, reliable adjustments and clear control of your settings.

• Attaches to the thermostat shaft to select and adjust temperature
• Restores secure engagement if the original knob is cracked or stripped
• Helps ensure settings can be changed as intended
• Common signs include a loose, wobbly, broken, or missing knob

• Disconnect power and allow the appliance to cool before servicing
• Pull the old knob straight off the control shaft; avoid prying that could damage the shaft
• Align the new knob with the keyed/flat side of the shaft and press on firmly
• If your model uses a set screw, align the knob and tighten it before testing operation

The Grommet is an OEM part for Whirlpool gas cooktops. It forms a protective barrier and seal where wiring or mounting bolts pass through ventilation cutouts.

Causes of a bad grommet typically include degradation of the rubber material over time due to heat exposure during cooking. Physical stress from repeated installation/removal can also crack or loosen the seal.

Symptoms of a bad grommet include:

• Air leaks appearing around wiring/bolt openings  
• Drafts disturbing burner or element temperatures
• Noise from loose fixtures rattling 
• Risk of sparks near exposed connections

Replacing with an OEM grommet restores the protective seal while blending seamlessly with range aesthetics. Compatible brands include KitchenAid, Jenn-Air, and select Kenmore cooktop models. 

This white control knob replaces a worn or missing knob so you can smoothly select settings on your appliance again. It restores dependable turning feel and a clean, like-new appearance on the control panel.

• Attaches to the control shaft so you can select levels or functions
• Common fix for cracked, stripped, loose, or missing knobs
• Helps when the knob spins freely or is hard to turn
• Maintains clear alignment with the panel's indicator marks

• Disconnect power and, if applicable, shut off gas before servicing
• Pull the old knob straight off the shaft
• Align the new knob with the flat or splined shaft and press on until fully seated
• Verify smooth movement from OFF through all settings

Replacement control knob that restores reliable manual control of your appliance's settings. Fits the original shaft to provide a secure grip and accurate selection when the original knob is cracked, loose, or missing. What it does:

• Replaces a damaged or worn control knob so you can select temperature or burner settings with confidence.
• Provides a clear indicator alignment for correct setting selection and tactile feedback while turning.
• Helps resolve symptoms such as a cracked, loose, stiff, or missing knob that makes adjustments difficult or imprecise.
• Matches OEM geometry for a factory-like fit and operation when installed on the correct shaft.

• Always disconnect power to the appliance before servicing to avoid electrical shock.
• Remove the old knob by pulling it straight off the shaft; align the new knob with the indicator and push firmly until seated.

This replacement control knob restores smooth, precise adjustment of your cooktop's surface burner. A worn or cracked knob can be hard to turn or fail to set the flame correctly—swap it out to regain reliable control and a clean, finished look.

• Turns the surface burner valve stem to control flame/heat level
• Helps fix symptoms like slipping, sticking, cracks, or missing knob
• Restores accurate burner setting and easy grip for daily use
• Color-matched to blend with compatible appliances

• Disconnect power and allow all burners to cool before servicing
• Pull the old knob straight off the valve stem; align and press on the new knob
• Do not force—verify the flat (D) orientation on the stem matches the knob insert
• Test each burner for proper operation after replacement

This surface burner knob replaces a worn or missing control knob on your gas cooktop or range, restoring precise flame adjustment and a clean, finished look. It fits onto the burner valve stem for smooth, reliable operation.

• Turns the surface burner valve to control flame level from low to high
• Common fix for knobs that are cracked, stripped, loose, hard to turn, or missing
• Helps when burner heat is difficult to set or won't hold steady
• Restores consistent, easy-to-grip control of the burner

• Turn off power and ensure all burners are cool before starting; shut off gas supply if working near the control area
• Pull the old knob straight off the valve stem—do not pry against the control panel
• Align the new knob with the stem orientation and press firmly until fully seated
• Test burner operation to confirm smooth adjustment through the full range

Color: White

This white control knob fits an infinite switch for a surface element. It lets you turn the burner on/off and smoothly adjust heat, restoring secure control and a clean look when the original knob is cracked, stripped, or missing.

• Attaches to the infinite switch to turn the surface element on/off and adjust heat
• Restores a secure grip and engagement when the old knob is cracked, loose, or stripped
• Helps ensure proper alignment with the control markings for accurate settings
• Common symptoms: knob broken, missing, wobbly, hard to turn, or won't stay on the shaft

• Turn off power to the appliance to prevent unintended activation during replacement
• Pull the old knob straight off the switch shaft; avoid prying on the control panel
• Align the new knob with the shaft orientation and press straight on until fully seated
• Verify the pointer aligns to Off before restoring power

Color: White/chrome

Gas valve burner control knob. Color: White. It measures about 2 inches in diameter. For black order WP74011260.

This burner knob replaces a worn or damaged control knob on ranges and cooktops, restoring a secure grip and clear settings for safe, reliable heating control. Simple swap keeps controls looking and functioning like new. What it does:

• Fits onto the stove/cooktop control shaft to select burner heat levels.
• Restores tactile control when the original knob is cracked, melted, or loose.
• Helps prevent accidental heat changes from slipping or damaged knobs.
• Matches OEM shape and mounting for proper engagement and alignment.

• One replacement burner control knob.

• Remove power to the appliance or disconnect gas for safety before servicing.
• Pull off the old knob and push the new knob straight onto the control shaft until seated.
• Do not force or rotate excessively during installation; confirm proper fit and function before normal use.

Color: Bisque

This replacement control knob restores a worn or broken factory knob so you can easily and safely set your appliance's functions. It provides a simple push-on fit to make appliance adjustments quick and reliable. What it does

• Replaces a damaged or missing control knob so settings can be selected accurately
• Restores tactile grip and clear pointer alignment for repeatable control
• Helps prevent slipping or accidental changes to selected settings
• Fits the original control shaft for correct operation when installed

• Disconnect power to the appliance before servicing to reduce shock risk
• Remove the old knob by pulling straight off the shaft; align the new knob's splines and push on until fully seated
• Verify proper seating and function before returning the appliance to normal use
• If the knob feels loose or won't engage, stop and check shaft type and part number compatibility

Control knob that replaces a damaged or missing appliance dial to restore simple, reliable selection of temperature or cycle settings. Provides a secure grip and clear position control for everyday use. What it does:

• Replaces cracked, worn, stripped, or missing control knobs so you can select settings reliably.
• Mounts on the appliance control shaft to allow accurate pointer alignment and selection.
• Reduces slipping, spinning, or inconsistent selection when turning the dial.
• Restores the user interface so controls are easier and safer to operate.

• Disconnect power to the appliance before servicing controls.
• Most knobs simply pull off the control shaft and the replacement presses on until seated.
• If the original knob used a set screw or retaining clip, save and reinstall that hardware.
• If the knob does not seat easily, stop and verify shaft type and fit to avoid damage.

This white valve knob replaces a worn, cracked or missing control knob so you can safely and easily adjust burner or oven settings. It restores a secure grip and precise control for temperature or flame adjustments. What it does:

• Replaces a damaged or stripped control knob used to turn gas or electric valve controls
• Provides a positive grip so settings can be changed smoothly and accurately
• Helps stop slipping or spinning that prevents proper temperature or flame adjustment
• Matches original fit to engage the control shaft properly when installed

• Turn off power and gas supply before removing the old knob
• Pull off the old knob straight from the control shaft; align splines and push new knob fully onto the shaft
• Do not force or hammer the knob; ensure it seats squarely to avoid damage
• Test control operation after installation and restore power/gas only when connection is secure

A replacement burner knob for electric ranges that restores reliable control of a surface element. Simple, direct fit for the matching original control shaft and restores user control of heat settings. What it does

• Replaces a worn, melted, cracked, or missing burner control knob to allow safe adjustment of the surface element.
• Engages the stove/range control shaft so settings click and hold as intended.
• Helps prevent slipping or inaccurate temperature selection caused by a damaged knob.
• Matches the original shape and fit for intuitive operation.

• One replacement burner knob (single).

• Install is typically plug-and-play: pull off the old knob and push the new knob onto the control shaft; no tools usually required.
• Disconnect power to the appliance before working near controls if removing any control panel components.
• If the knob does not seat properly, stop and verify shaft style to avoid damage.