Mcculloch Leaf Blower Parts

This recoil starter spring is what retracts the rope back into the main starter assembly. When the rope is pulled, the spring expands. The release of the rope triggers a retraction, which pulls the rope in and activates the starter, creating the chain reaction that starts the engine. This spring can get twisted or become hyperextended with regular use, in which case the only solution would be to replace the entire spring assembly. This OEM recoil starter spring is manufactured by Husqvarna, with high-quality standards in mind. It is compatible with Poulan, Weed Eater, and Husqvarna machines, including trimmers, leaf blowers, edgers, and pruners. Owners should always consult their parts diagram or owner’s manual for exact part number compatibility. This durable metal spring is designed from high-quality materials and is sold individually. The starter rope and other parts of the assembly are sold separately. Always disconnect the spark plug and wear gloves when performing engine work.

This isolator kit is a genuine Husqvarna part, sold individually. This isolator kit can be used as a replacement part for a leaf blower or a leaf vacuum. This isolator kit affixes to the area in between the blower frame and the impeller housing. The kit includes fastening components such as isolators, nuts, and washers.This isolator kit might have to be replaced if these components are lost, misplaced, or damaged. Isolators, nuts, and washers can all be stripped over time, rendering them useless. They can be easily misplaced as they are small components that might go missing without affecting anything in the appliance. If this occurs, this isolator kit should be ordered as a genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This isolator kit is compatible with the following outdoor appliance brands: Husqvarna and Poulan.

This is a genuine engine cylinder that is designed for use in select outdoor power equipment. The cylinder is the part of the engine that houses the spark plug and piston, creating the combustion chamber that the engine needs to ignite the air-fuel mixture that runs the engine. The cylinder is exposed to high heat, excessive pressure, and chemicals that can all cause wear and breakage over time. In the event that the cylinder goes bad, it needs to be replaced immediately to prevent further engine damage. This OEM cylinder is manufactured by Husqvarna. It can be used in trimmers, blowers, edgers, and pruners from the brand, as well as from Poulan and Weed Eater. The cylinder is sold as an individual unit and does not include hardware or other parts or accessories. Replacing the cylinder takes a little more effort because it requires disassembling the engine. To replace the cylinder, remove the engine shrouds, and then remove the engine from its mount. From here, the cylinder can be removed from the block and the piston can be taken out. Then, the new cylinder can have the piston installed before being bolted into place. The accessories can be replaced and then the engine can be re-mounted.

This replacement starter spring is a genuine OEM model from Husqvarna. The starter spring, also sometimes called the recoil spring or recoil starter spring, is part of the entire starter assembly. It attaches to the fan and flywheel housing and is responsible for helping to retract the starter rope when it is pulled to engage the engine. Over time, the spring can wear out or become twisted. This can cause the starter rope to no longer retract or it can even seize up the entire starter assembly. Replacement of the spring is the only option and this OEM part can provide an exact fit for select engines. This part is designed for use with blowers, edgers, trimmers, and pruners that feature Husqvarna engines and that are manufactured by brands like Weed Eater, Poulan, and Husqvarna themselves. The starter spring is made of durable metal and is sold individually. Always disengage the spark plug and allow the engine to cool completely before beginning and repair projects, and protect the hands by wearing gloves.

This is a replacement leaf blower tube. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective leaf blower tube on a variety of different leaf blower models. This tube makes up part of the vacuum attachment assembly. It links the vacuum bag directly to the lower tube. This part can become worn with regular use and may require replacement. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this mulcher kit, refer to the appropriate owner's manual and included diagrams.As an authentic replacement part, this leaf blower tube is suitable for use on several different lawnmower models manufactured by Husqvarna and Craftsman. This is a genuine part made of high-quality, durable materials and is sold individually.

This authentic OEM part is a replacement foam air filter for a gas-powered leaf blower. For a gas-powered engine to work, it must maintain a balance of fuel and oxygen. This means it is constantly taking in air from outside the engine. However, working in dusty areas can cause a lot of debris to mix with the air. A foam air filter helps to catch that debris before it can clog up an engine. After an extended period of use, though, the filter will become clogged. Replacing a foam air filter is an easy repair that will only require a screwdriver. Remove the air filter cover, take out the old filter, and put in the new filter. This part works with gas-powered leaf blowers from Poulan, Weed Eater, and Husqvarna and is sourced directly from the original manufacturer. It ships individually.

A piston ring is a component located between a piston and a cylinder and helps the engine operate correctly. This component maintains gas compression between the cylinder wall and piston, makes lubricating oil to prevent scuffing, transfers heat from the crown of the piston to the cylinder, and prevents the piston from hitting the cylinder wall. There are several signs that a piston ring needs to be replaced. Excessive smoke may come out of the engine, oil may be used more rapidly, and your equipment might have a decreased performance without the power it used to have. If the engine is still in good shape, but the rings have lost their tension, replacing the piston ring is the best solution. Inspecting the cylinder for wear is also important since damaged piston rings can lead to cylinder wear. This piston ring is a genuine OEM product directly from the manufacturer. It comes as an individual part. It can be used on hedge trimmer, leaf blowers, and trimmers from Husqvarna, Weed Eater, and Poulan. Several tools, including a screwdriver and wrenches, might be required to install the replacement part.

The flywheel is a heavy metal wheel that connects to the rotating shaft. Its purpose is to help regulate how power is delivered from the motor to the rest of the tool. Its weight and inertia oppose and moderate small changes in the speed of the engine and holds onto that energy for use when needed. The most common problem with flywheels is for them to crack. As the engine begins to age and other parts begin to break down, excess vibration in the engine can cause the flywheel to wear down, grate, and even shatter. The flywheel needs replacing when the motor begins slipping into the wrong gear. The exact steps for replacing the flywheel will depend on the specific model being repaired. It should only require a screwdriver. This is a genuine OEM replacement flywheel assembly for gardening hand tools like leaf blowers, edgers, weed eaters, and hedge trimmers made by Craftsman, Husqvarna, Weed Eater, Poulan, Poulan Pro, Paramount, Turf King. This part ships individually.

This is a leaf blower fan blade, also called an impeller. This is what creates the flow of air out of the machine that blows leaves, grass clippings, and other debris out of the way. Without this part, the leaf blower would be unable to move air at all. The leaf blower fan blade is subject to some wear and tear through normal use. It is also made of plastic and may degrade over time, eventually cracking. If the leaf blower is not moving air and the engine is running normally, this could be the problem. Replacing the leaf blower fan blade will require opening the blower motor housing. Locate the fan blade, remove the Torx screws, and then remove the old impeller. Install the new one, replace the screws, and then reassemble the housing. This replacement fan blade is made from plastic with a metal sheath/insert. Note that this is an OEM part, and it is sold individually. It fits over 44 different Craftsman and Husqvarna gas-powered leaf blowers.

This is a replacement air filter for a trimmer, leaf blower, or vacuum. It is necessary to prevent any significant quantities of dust or debris commonly kicked up during the use of the machine from entering into the engine. It could block the airflow, overheat the motor, and harm or destroy it. This OEM replacement part is straightforward to install and depending on the model, will usually require little more than a screwdriver to effect the repair. The removal of the housing over the filter is needed, and then it is a matter of just removing the clogged our outdated filter and slipping in the replacement. Shaped like a cup, it will fit snugly into the housing, and make reassembly just as simple. Before replacement, the filter should be treated with some oil by popping it into a plastic bag with a few drops of oil and working it into the material. This genuine OEM air filter works with Craftsman, Ryobi, Troy Bilt, Yard-Man, Bolens, MTD, Cub Cadet, and Murray machines, among others. It ships individually.

This wrist pin retainer is an essential component that is used to secure the piston pin in many types of handheld lawn and garden equipment. The pin is made of durable metal, but if it is missing or has become damaged, the part will need to be replaced. A wrench set, screwdriver, and pliers will be needed to make the replacement. To replace the wrist pin retainer, get access to the piston and then take off any keeper rings included. Use tools to tap on the wrist pin retainer to make it come loose and take it out of the equipment. The replacement can be inserted into the same place and the equipment will need to be reassembled.This is a genuine OEM replacement part that is sourced directly from the manufacturer. The wrist pin retainer is designed to be used in trash compactors, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, pole pruners, and carpet cleaners manufactured by Turf King, Craftsman, Paramount, Husqvarna, Broan, Weed Eater, Poulan, and Poulan Pro. The part is sold individually.

Craftsman manufactures this cylinder head bolt that fastens the cylinder of a small gasoline-powered engine to the engine manifold. There are often two head bolts that secure the cylinder. The placement of the bolts is important as it not only fastens the two engine parts together, but holds the cylinder gasket in place, as well. Among the equipment that uses this type of cylinder head bolt are leaf blowers, power vacuums, grass trimmers, edgers, and hedge trimmers. While it is rare for the bolts to fail, the gasket they hold in place can sometimes wear and allow oil to leak outside the engine manifold or into the combustion chamber. This is revealed by white, oily smoke or an abundance of oil on the equipment. When replacing the head gasket, it is a good idea to replace the cylinder head bolts, as well, as they will have received a good deal of wear, potentially weakening them. These bolts are sold separately, so the user should make sure to purchase the correct number of bolts needed. Before beginning, the user should consult diagrams of the internal engine parts and their order. These bolts are OEM genuine replacement parts, built to match the factory originals.

This replacement part is a screw. This part is a genuine replacement part made by Husqvarna. Screws are small but important in many different types of machinery. Screws are able to hold different parts in place and help them stay secure during use so that the machine can operate smoothly and efficiently. A new screw might be needed if the current one is missing or damaged in any way. It is possible that the screw can become stripped over time and therefore not stay in place properly. If this is the case it is recommended that it be replaced. This repair should be fairly easy and only require a screwdriver and possible pliers. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use. Note that This is a genuine OEM replacement part.

Screws are responsible for holding together various lawn and garden engine components and housing parts. Although it is made of durable metal, the screw can be subject to damage from an incident or impact. It could also become worn or stripped over time, or even lost in the process of other repairs. As a result, a replacement would be necessary, and it should be made as soon as possible. This screw will provide the perfect fit for compatible machines. This genuine OEM replacement screw is manufactured by Husqvarna to exact standards. It can be found in applications on more than 150 machines from Poulan, Husqvarna, Weed Eater, and Jonsered. The screw is used on multiple machines, including hedge trimmers, pruners, blowers, and trimmers. Be sure to check the parts diagram for exact application and location of this screw. The screw is sold individually as a single unit and those who need more than one will have to purchase additional quantities. This screw is made of premium metal and requires a Phillips head screwdriver for replacement.

This is an OEM replacement screw that is specifically designed to secure the fuel tank on select lawn and garden equipment. The fuel tank retainer screw is made of durable metal and will be screwed to the fuel tank and the body of the machine, holding the tank in place and preventing it from being exposed to excessive vibrations or potential spillage. These screws can become worn over time or be lost in the process of other repairs. This genuine OEM fuel tank retainer screw is compatible with hundreds of trimmers, blowers, edgers, and pruners. It can be used with select models of machines from Poulan, Husqvarna, Weed Eater, and Jonsered. Owners should check their parts diagram for exact placement and part number compatibility as fuel tank retainer screws come in different lengths and diameters, so they are model-specific. This screw is made of durable metal and will require a Torx driver to install. The fuel tank retainer screw includes a built-in washer and is sold as an individual unit. Those who need more than one will have to purchase multiple quantities.

This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.