Mcculloch Pruner Parts

Replacement bump knob for line trimmers. Secures the spool on the trimmer head. Replace if cracked, broken, stuck, or seized. Easy installation component.

Outer cover for string trimmer housing that clips into the reel bottom and secures behind the center button. Replace if cracked, broken, or missing.

Muffler shield assembly for gas line trimmers. Protects the muffler and surrounding components. Replace if cracked, damaged, or missing for safety.

Replacement fuel cap assembly for gas leaf blowers and trimmers. Seals the fuel tank to prevent leaks and evaporation. Order when cap is cracked or missing.

Few parts fulfill as many roles on lawn mowers and other landscaping power tools than the cover screw. This screw serves to attach metal housing parts, assemblies, and shrouds to one another on equipment such as power vacuums, snow blowers, edgers, tillers, hedge trimmers, lawn tractors, leaf blowers, grass trimmers and cultivators. As these are extremely durable metal screws, they seldom fail under ordinary use. It should be noted, however, that they are most often used at connection and pressure points. Stresses at these junctions sometime loosen screws, causing them to be lost or occasionally resulting in stripped threads. It's also occasionally the case that these screws are lost during repair or routine maintenance of yard equipment because of their small size. Users should make sure to consult their owner's manuals for replacement steps and any special instructions. Because of their small size and the ease of losing them during repair work or maintenance, it's recommended to keep a supply of appropriately sized screws on hand. Most importantly, when replacing a part make sure to use a genuine OEM replacement part. They are manufactured according to the specs of the original parts and are perfect replicas.

Wound spool assembly for gas and grass line trimmers. Holds and feeds trimming line during operation. Replace if cracked, broken, or worn for proper use.

These ignition screws are used in the ignition systems on a variety of lawn and garden equipment. The screws are made of durable metal and fasten together different parts in the ignition system. While the screws are made of high-quality material, they can experience stress, wear and tear, and impacts that will break or damage them.To replace an ignition module screw, the garden tool will need to be disassembled. First, it should be turned off and placed on a flat surface. The spark plug wire should be disconnected before making the replacement. The ignition assembly will need to be taken apart to reach the ignition module screw. Use a screwdriver to remove the old part and replace it with a new replacement screw.This is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is sold as an individual unit. Each ignition module screw is designed to be used with hedge trimmers, string trimmers, leaf blowers, edgers, and pole pruners created by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.

This throttle assembly cable is manufactured by Craftsman, but also used by Poulan, to regulate the flow of fuel to certain small gasoline-powered engines. This assembly houses the throttle trigger that is used by almost a dozen different machines, including not only trimmers, but also pole saws and other small gasoline-powered tools. Apart from the cutting edges of the pole saws and trimmers, the parts of these devices that sees the most wear and tear, and is most likely to fail, are the throttle assemblies. Whether banged about because of proximity to the throttle trigger or simply because it's the only part protruding from the mid-body of the typical weed cutter, the throttle assembly housing and cable are susceptible to failure. Most often, failure of the cable is the result of one of the buds, attached at the ends to clasp securely, having broken off. In this case, the gasoline engine may start, but will not rev or only does so sporadically. Replacing the cable is a matter of removing the throttle housing and trigger as well as detaching the cable from the carburetor. When replacing the cable, be sure to use one like this, which is a genuine OEM replacement part, manufactured to replicate the specs of the original.

This replacement piston kit is designed to be used with many different types of handheld lawn and garden equipment. The pistons are important parts of the engine. The crankshaft powers the pistons, so they move up and down within the cylinder. The purpose of the pistons is to transfer the gas that expands within the cylinder. The pistons can begin to wear out over time, which means that they could fail, which will cause serious problems for engine performance. If there are issues with the piston, a replacement piston kit is essential to get the machine back up and running. When a piston goes bad, it will cause the engine power to decrease. In some cases, the engine might lose all power. Replacement will require pliers, a set of wrenches, and a screwdriver to complete. This high-quality piston kit replacement is a genuine OEM part. It is sold individually. The part can be used for pole pruners, edgers, leaf blowers, string trimmers, and hedge trimmers. Compatible brands include Weed Eater, Poulan, Poulan Pro, Husqvarna, and Craftsman.

This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.

Fix trimmer that won't accelerate, makes grinding noises, or emits burning smell. Clutch assembly connects engine to cutting head. Moderate DIY repair.

Trimmer head won't spin or engages slowly? The clutch drum assembly connects the clutch to the flex shaft and cutting head. Direct replacement part.

Won't start or rope won't retract? This recoil starter pulley kit restores pull-start function on gas leaf blowers and line trimmers. DIY-friendly.

Replacement fan baffle for gas line trimmers and pole pruners. Directs airflow for proper engine cooling. Replace if cracked, broken, or missing.

Curved drive shaft houses the cable that connects engine to cutting head. Replace if bent, cracked, or damaged from impact. Provides maneuverability.