Mcculloch Trimmer

Upper housing assembly with flexible shaft for gas line trimmers. Installs between power head and lower boom. Replace if housing is cracked or damaged.

Protective cover assembly that shields the muffler on gas tillers and trimmers. Replace if cracked, broken, or missing to safely house exhaust components.

This is a cylinder assembly that is designed for use in various lawn and garden small engines. The cylinder assembly is a component of the starter assembly and engine. Problems with engine compression are usually the result of the cylinder assembly going bad and needing to be replaced. If the cylinder assembly is not working, the engine may not work at all. One test of the cylinder assembly is to cover the cylinder hole with a finger and pull the starter rope. If the cylinder is not working correctly, no air will come through the hole.If the cylinder assembly is not functioning, it needs to be replaced. The engine will need to be taken apart to get access to this assembly so that it can be removed and replaced. This repair requires work gloves and a basic toolset. Never work on hot engines and make sure the spark plug is removed before working on the machine.This cylinder is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The cylinder assembly is designed to fit blowers, cultivators, edgers, trimmers, and vacuums manufactured by Ryobi, Troy Bilt, MTD, Yard Machines, and Bolens.

Engine won't start when you pull the cord? This recoil starter assembly includes the rope, pulley, and spring needed to restore pull-start function.

Excessive engine noise from your gas trimmer? This muffler assembly reduces motor sound during operation. Direct-fit replacement for string trimmers.

Drive shaft for handheld trimmers. Replace if worn, cracked, or broken to restore proper operation. Check regularly to prevent mid-use failure. Verify fit.

Inner spool reel for line trimmers. Holds and winds trimmer string inside the trimmer head. Replace if cracked, broken, or worn from use.

Fix a loose or damaged split-boom connection with this drive shaft coupler. Includes knob, coupler body, and mounting screws for secure shaft attachment.

If your starter rope won't retract or recoil properly, the recoil starter pulley may be damaged. This pulley works with the recoil spring to retract the rope.

Engine piston ring set prevents fuel leakage and maintains compression. Replace when you notice reduced power, excessive smoke, or oil consumption. Verify fit with your model number before ordering.

Lower housing boom for line trimmers and handheld garden equipment. Replaces cracked, broken, or damaged boom sections in the lower assembly.

Secures the lower handle clip on line trimmers and lawn equipment. Replace if broken, stripped, or missing to properly mount the handle assembly.

Inner spool reel for gas line trimmers. Holds and feeds trimmer line during operation. Replace if cracked, worn, or damaged to restore proper line feeding.

This is the clutch drum that houses the clutch that engages the power tools on more than 50 gasoline-powered lawn and landscape devices. The clutch sits inside this housing, which enables it to rotate. When the RPMs of the engine reach a certain point, the clutch expands and causes the drive shaft of the tool to engage. Among the different kinds of equipment that use this clutch housing are cultivators, edgers, and grass trimmers. The clutch, and therefore the clutch drum, receive a great deal of wear for several reasons: the vibration of the engine, the rapid up and down change of engine revolutions, and resistance met by the tools that are transferred back to the clutch and housing. Signs that the clutch is failing include a slow response to increased engine RPMs and an inability for the power tool to engage the drive shaft. In these cases, the clutch and housing should be replaced in order for the equipment to operate properly again. When choosing a clutch housing, it is important to select one that, like this one, is a genuine OEM certified part. This housing is compatible with Craftsman, Troy-Bilt, MTD, Bolens, Yard-Man, and Ryobi equipment.

This blade retainer kit is designed for use with string trimmers and edgers by many manufacturers. It comes with a metal retaining washer that is used with the blade, as well as the needed spool cutting heads. This kit also includes the nut needed to fasten the blade to the gearcase. It is used to install a blade onto the trimmer while adding stabilization through the nut. The parts in the blade retainer kit can become worn out during use and may need to be replaced.When the blade needs to be replaced or a part of the blade retainer kit is broken, removing the parts is required. Moving the blade involves turning the retaining bolt while the equipment is on a level surface. Next, undo the bolt holding the blade so it can be removed. The blade can be replaced at this time, as well as the parts from this blade retainer kit.This blade retainer kit is made for edgers and string trimmers manufactured by Yard-Man, Craftsman, Bolens, Ryobi, MTD, Troy-Bilt, and Yard Machines. It is a single retainer kit that comes as a genuine OEM replacement part sourced directly from the manufacturer.

Air filter cleaner for gas trimmers and tillers. Replace when clogged or engine runs rough to restore performance. Confirm fit with your model number.