Parts for Electrolux E30MC75PPSC: Microwave Parts

This push-button door switch detects when a refrigerator or freezer door opens and closes so interior lights and fans operate correctly, helping maintain visibility and normal cooling function. What it does

• Sends an open/closed signal to control the interior light and fan when the door moves
• Commonly replaces a worn or stuck switch that causes lights to stay on or fail to turn on
• Helps prevent unnecessary run time of interior lights that can warm the cabinet
• Works as the user-access point for door-open sensing in compatible Frigidaire appliances

• One push-button door switch

• Disconnect power before starting any repair to avoid shock or damage
• Access and replace the switch from the door or cabinet interior per your model's disassembly steps
• Handle wiring and connectors gently; ensure secure connections before restoring power

A genuine-style refrigerator water filter cartridge that helps improve the taste and clarity of your drinking water by reducing common contaminants and particulates. Fits inline into the fridge's filter housing for regular water and ice use. What it does:

• Removes or reduces sediment and particles that can cause cloudy water and particles in ice
• Helps improve taste and odors from tap water
• Supports consistent water quality for drinking and ice production
• Can help prevent buildup that may affect dispenser performance

• Turn off the water supply and follow your refrigerator's instructions before removing the old filter
• Push/rotate to remove and install the replacement per the appliance's filter housing design
• Flush several cups of water through the dispenser after installation to clear air and carbon fines
• Inspect for leaks after installation and replace promptly if any leak is found

The Door Switch is an OEM replacement part for Frigidaire wall ovens. It is a component located on the oven door that detects when the door is opened and closed. The door switch works alongside the control board to regulate oven operations based on door position.  

Symptoms of a bad door switch can include:

• Oven failing to automatically go into bake or warm modes after door closure
• Interior lights not turning on when the door is opened
• Control buttons/display remaining constantly lit instead of dimming
• Oven not heating or functioning properly in different modes

Causes relate to normal wear over extended use as the door switch mechanism cycles with frequent door openings and closings. Moisture exposure or impacts could also degrade switch performance.

This OEM Frigidaire switch is compatible with Amana, Jenn-Air, KitchenAid, and some Electrolux wall oven models as well.

This thermal cut-out is a temperature-sensing safety device that helps protect the refrigerator's defrost/heater circuit by opening the circuit when temperatures exceed safe levels. It prevents overheating and helps maintain normal defrost cycles. What it does:

• Senses temperature in the defrost/heater area and opens the circuit to stop heating if temperatures get too high
• Prevents overheating of defrost heater or related components
• Can cause defrost failure symptoms when faulty, such as excessive frost buildup or poor cooling
• May also contribute to long run-times or irregular defrost cycles when not operating correctly

• Disconnect power to the appliance before servicing to avoid electrical shock
• Handle the part and wiring gently; ensure correct orientation and secure connections per service manual
• Use the exact replacement part number for compatibility

This interior refrigerator lamp provides reliable lighting inside the fresh-food compartment so you can see contents clearly. It replaces a dim or non-working lamp to restore normal interior illumination. What it does:

• Provides interior lighting for the refrigerator compartment
• Replaces a burned-out, flickering, or intermittently working lamp
• Helps you find food and check expiration labels without opening the compartment longer than necessary
• Works with the existing lamp housing and socket when compatible

• One interior refrigerator lamp

• Disconnect power to the appliance before replacing the lamp to avoid electrical shock
• Allow the lamp and surrounding area to cool before handling
• Handle the lamp carefully to avoid breakage; dispose of broken bulbs per local regulations
• Check the socket and appliance light switch for faults if the lamp does not light after installation.

This evaporator fan motor circulates cold air across the evaporator coil to keep the refrigerator and freezer compartments cold and balanced. Replacing a failing fan restores proper airflow and helps maintain set temperatures. What it does:

• Spins the evaporator fan blade to move air over the evaporator coil for even cooling
• Helps prevent ice build-up from poor airflow and uneven compartment temperatures
• Commonly needed when you hear a loud humming, rattling, or no airflow from the fridge section
• Supports defrost system performance by ensuring warm air is not trapped near the coil

• One evaporator fan motor

• Disconnect power to the appliance before starting any repair
• Typically accessed by removing the evaporator cover inside the freezer compartment
• Handle wiring and connector clips carefully; ensure correct orientation of the fan blade before reassembly

This motor start/run capacitor helps the compressor and fan motors start and run reliably, restoring normal cooling performance when a failing capacitor causes hard starts or intermittent motor operation. A direct-replacement component for affected units. What it does:

• Provides the electrical phase shift and stored energy needed for compressor and fan motor startup.
• Helps prevent slow starts, humming, or motors that won't start reliably.
• Restores stable motor operation and can reduce overheating or tripping caused by a weak capacitor.
• Works as a replacement for the same OEM-design capacitor in compatible refrigerators and freezers.

• One replacement capacitor (single unit)

• Disconnect power to the appliance before inspecting or replacing the capacitor to avoid shock.
• Verify capacitor is fully discharged before handling; use insulated tools and follow safety procedures.
• Match the capacitor's mounting and terminal type to the existing part for correct fit and connection.

This replacement motor restores reliable rotation to the component it drives, helping your appliance circulate air or operate as designed. Replacing a worn motor can resolve no-start conditions, loud operation, and weak performance.

• Provides the rotational drive for the attached component, enabling proper airflow or movement
• Common failure symptoms include humming without turning, intermittent operation, seized shaft, or grinding/squealing noises
• Visual signs like burned windings, cracked housing, or excessive shaft play also indicate replacement is needed

• Disconnect power to the appliance before servicing; allow any moving parts to stop completely
• Photograph or label wire positions and transfer them to the new motor one-for-one
• Reuse existing mounting hardware and verify the motor and attached wheel/blade spin freely without rubbing
• After installation, restore power and test operation before final reassembly

This latch hook is the replacement hook that secures a door latch assembly so the appliance door stays closed and operates correctly. It restores proper door engagement to prevent intermittent opening during use. What it does:

• Replaces a worn or broken hook that keeps the door latch engaged
• Helps the door stay closed and maintain a tight seal during operation
• Stops intermittent or failed latching that can interrupt cycles or operation
• Works as part of the door/latch mechanism to ensure consistent engagement

• Disconnect power (and water supply for dishwashers) before starting any repair
• Inspect the latch assembly and strike for wear or damage before installing the new hook
• Test door operation and cycle the appliance to confirm proper engagement after installation

The Latch is an OEM replacement part for Frigidaire built-in microwaves. Securely mounted to the top interior section of the microwave cavity door, the positive-locking latch holds the door safely shut during operation. Crafted from corrosion-resistant materials for extended use, the latch handle withdraws the hook mechanism with a simple pull to conveniently access food within.

Symptoms of a bad latch include:

• The microwave door popping or falling open unexpectedly  
• Difficulty closing or fully engaging the secure latch hook 
• Wear signs like loose mounting points or a worn handle

Causes can involve repeated opening/closing cycles gradually loosening mounting fixtures, or parts rendered ineffective by moisture intrusion over time.

Replacing this Frigidaire OEM latch prevents potential microwave door opening during cooking cycles. Compatible with Electrolux, Gibson, Kelvinator, and Kenmore built-in models.

This replacement cam helps position and guide the appliance door or control linkage for correct latch engagement and smoother operation. Fits where a small plastic/metal cam locates moving parts and transfers motion. What it does:

• Rotates or rocks with the hinge or actuator to engage the door latch or control lever
• Restores proper door alignment and latch engagement when the original cam is worn or broken
• Can reduce sticking, binding, or clicking noises at the hinge or latch area
• Commonly replaced when the door won't stay closed, is misaligned, or moves unevenly

• One cam (5304480641)

• Disconnect power before servicing and follow all safety precautions
• Access may require removing the door, trim, or control panel depending on model
• Inspect mating parts (hinge, latch, fasteners) for wear and replace if damaged
• Use correct fasteners and orientation; test operation before full reassembly

This coupling connects the washer drive motor to the transmission to transfer power for agitation and spinning. Replacing a worn or broken coupling restores reliable drive engagement and reduces noise and slipping. What it does:

• Transfers motor rotation to the transmission so the drum agitates and spins
• Prevents metal-on-metal contact between motor and gearbox when intact
• Common symptom: washer won't agitate or spin, or slips under load
• Common symptom: loud grinding or clunking noises from the washer during cycle

• One coupling

• Disconnect power and water before servicing; follow the manufacturer's disconnection procedures
• Access may require removing the washer cabinet or front panel—refer to your model's service manual
• Inspect adjacent parts (motor mounts, shaft splines) for wear and replace as needed

This is a genuine replacement cover designed to protect internal components and restore the appliance's finished appearance. It provides a durable barrier that helps prevent dust, moisture, and accidental contact with internal parts. What it does:

• Covers and protects internal components behind the panel, maintaining appliance safety and appearance
• Helps prevent debris and moisture from reaching sensitive parts
• Restores a secure fit and alignment of the front/cabinet area
• Useful when the original cover is cracked, warped, or missing

• One replacement cover

• Disconnect power (and water, if applicable) before starting any repair
• Follow OEM service instructions for removal and reinstallation to avoid damaging adjacent components
• Use appropriate hand tools; avoid overtightening fasteners

This replacement angle is a small metal mounting bracket used to secure components in place on compatible Frigidaire appliances. It restores proper positioning and support for panels or assemblies that rely on a fixed bracket. What it does

• Provides a sturdy mounting point to hold panels, rails, or small assemblies in alignment.
• Replaces bent, cracked, or missing brackets that allow shifting or vibration.
• Helps stop rattling, misalignment, or loose panels caused by a damaged bracket.
• Works as a direct-fit hardware piece when the original bracket is worn or broken.

• Installer should turn off power to the appliance and unplug before starting work.
• Use appropriate hand tools; bracket fasteners may require small screws or bolts.
• Keep track of removed fasteners and any shims or spacers—reinstall in the same order.

This complete door assembly replaces a damaged or worn door to restore sealing, alignment, and normal operation. It provides a ready-to-install replacement that helps stop air leaks and improves temperature control and usability. What it does:

• Replaces the appliance door structure so it opens, closes, and latches correctly
• Restores the door sealing surface to prevent air and moisture infiltration
• Helps resolve symptoms like poor temperature control, frost buildup, or visible door damage
• Eliminates rattling or misalignment caused by bent or broken door components

• Disconnect power (and water, if applicable) before beginning repair
• This assembly can be heavy or awkward—have a helper available for safe handling
• Align and secure mounting points per OEM instructions; test latch and seal before finishing
• If gasket or trim appears damaged, replace those components for optimal performance

This replacement adhesive label restores the appliance's original product and rating information so owners can identify model and serial details. It helps keep safety and specification markings legible for troubleshooting and repairs. What it does:

• Replaces a missing, torn, or faded product/rating label so model and serial info remain readable
• Preserves appliance specifications and safety markings used during service and part ordering
• Helps technicians confirm correct parts and diagnostics without guesswork
• Prevents misidentification that can delay repairs or lead to incorrect parts

• One adhesive product/rating label

• Clean and dry the mounting surface before applying; remove old adhesive residue
• Align carefully; press firmly from one side to the other to avoid air bubbles
• Use gloves if handling adhesive-backed labels to avoid fingerprints or oils
• Do not stretch or trim the label; replace with the exact part supplied

This replacement appliance label provides the factory identification and safety information fastened to the appliance so you can read model/serial and safety/warning text clearly. It restores legible markings for servicing and ownership records. What it does

• Shows the appliance identification, model/serial or rating area and factory safety/warning text so technicians and owners can service data.
• Helps ensure required safety and operating instructions remain visible and readable.
• Replaces a torn, faded, or missing label that can make identification and troubleshooting harder.
• Supports accurate parts ordering and service by restoring the original markings.

• One replacement label

• Peel-and-stick replacement; clean and dry the surface thoroughly before applying.
• Align carefully and press from one edge to the other to avoid bubbles; firm pressure ensures adhesion.
• Do not stretch or trim the label unless explicitly specified by the equipment instructions.
• For safety, disconnect power or follow manufacturer safety precautions before working near electrical components.

This is a replacement screw used to secure appliance components and panels so assemblies stay stable and aligned. It provides a straightforward fix when a mounting fastener is missing, stripped, or damaged. What it does

• Secures panels, brackets, or trim to prevent movement and vibration
• Stops rattling or loose parts caused by missing or damaged screws
• Restores proper fit and alignment of the affected assembly
• Works wherever the OEM-designated screw of this size and thread is required

• Turn power off or unplug the appliance before working on electrical areas
• Use the proper-size driver to avoid stripping the head
• Start threads by hand, then tighten until snug — do not overtighten
• If the original screw is corroded or the hole is damaged, inspect mating parts for repair before installing

This is a replacement mounting screw used to fasten appliance panels, trim, or components. It restores secure attachment and helps eliminate rattling, loose parts, or misaligned panels for a clean, stable fit. What it does:

• Secures panels, brackets, or trim to the appliance chassis
• Stops vibration-related rattles and movement from loose fasteners
• Keeps components aligned for proper operation and appearance
• Replaces lost or stripped screws to restore factory fit

• Disconnect power and water before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Thread carefully and do not overtighten; stop when snug to avoid damage
• Inspect surrounding parts and replace as needed

This replacement lever restores a broken or worn lever used to operate the appliance mechanism, letting the related door, latch or control arm move and function properly. It's a direct-fit stamped/plastic lever designed for OEM fit and durable operation. What it does:

• Replaces a cracked, bent or missing lever to restore proper mechanical movement
• Helps re-engage door/latch or control linkage so the appliance can open, close or actuate normally
• Stops grinding, slipping or loose motion caused by a damaged lever
• Fits the original mounting points for straightforward replacement

• One replacement lever

• Install only after unplugging the appliance or switching off power at the breaker
• Verify correct orientation and engage any retaining clips or fasteners fully before testing
• Use basic hand tools; avoid over-tightening fasteners to prevent cracking the lever

This packing is a replacement door gasket that seals the appliance cabinet to keep cold in and warm air out, helping maintain proper cooling and reduce frost buildup. It restores a tight seal around the door for consistent performance. What it does:

• Replaces a worn or torn door seal to stop warm air leaks and reduce frost and moisture inside the compartment
• Helps the appliance maintain set temperatures and can improve cooling consistency
• Can reduce unnecessary compressor run time caused by poor sealing
• Addresses symptoms like visible gaps, cold loss at the door, or excessive frost buildup

• Disconnect power to the appliance or unplug before starting work
• Clean the door frame and contact surfaces before installing the new gasket to ensure a good seal
• Align and seat the gasket evenly around the door; some gaskets require gentle stretching or warming for proper fit
• Inspect door hinges and closing action; adjust if the door does not close evenly after gasket replacement

This holder is a small mounting bracket that secures internal appliance components to prevent movement and maintain proper alignment, helping reduce noise and keep parts functioning reliably. What it does:

• Secures and positions an internal component or assembly to the appliance frame
• Prevents shifting or sagging that can cause rattling or misalignment
• Helps maintain proper spacing for connected parts to operate correctly
• Reduces noise caused by loose fittings or vibration

• Recommended for users comfortable with appliance repair; disconnect power before servicing
• Remove adjacent panels or components as needed for access; keep fasteners organized
• Inspect mating surfaces and replace any damaged screws or clips for a secure fit

This electronic control board regulates the appliance's functions and user interface so cycles and settings respond correctly. Replacing a faulty board restores reliable control and display operation when the original board has failed. What it does:

• Interprets user commands and sends signals to motors, valves, and other components
• Controls cycle timing, temperature, and other programmed functions
• Can cause loss of display, non-responsive buttons, or failure to start when defective
• May trigger erratic or unexpected operation if internal electronics fail

• One electronic control board as shown

• Disconnect power (unplug or switch off breaker) before beginning work
• Handle the board by its edges and avoid static discharge (use an anti-static wrist strap if available)
• Verify appliance model and part number match before installing

A genuine-style refrigerator water filter cartridge that helps improve the taste and clarity of your drinking water by reducing common contaminants and particulates. Fits inline into the fridge's filter housing for regular water and ice use. What it does:

• Removes or reduces sediment and particles that can cause cloudy water and particles in ice
• Helps improve taste and odors from tap water
• Supports consistent water quality for drinking and ice production
• Can help prevent buildup that may affect dispenser performance

• Turn off the water supply and follow your refrigerator's instructions before removing the old filter
• Push/rotate to remove and install the replacement per the appliance's filter housing design
• Flush several cups of water through the dispenser after installation to clear air and carbon fines
• Inspect for leaks after installation and replace promptly if any leak is found

A replacement thermal (high-limit) fuse that restores the appliance's overheat protection by interrupting power if temperatures exceed safe limits. Use this part when the original fuse has opened or failed to protect the heating circuit. What it does:

• Interrupts the electrical circuit if the appliance overheats to prevent damage or fire risk.
• Stops power to the heating element or circuit when the fuse opens.
• Common symptom: appliance heats intermittently or not at all while controls operate normally.
• Common symptom: no continuity at the fuse when tested with a multimeter.

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Locate the fuse per the appliance service manual or parts diagram; test continuity before replacing.
• Install the exact part; do not bypass the fuse or use substitutes that compromise safety.