Parts for Ge JEM825K01: 01 - Section1 Parts

Fix uneven heating in your microwave with this stirrer blade replacement. Distributes microwaves evenly for consistent cooking. Simple 15-minute repair.

Microwave not heating or heating unevenly? A failed magnetron is the likely cause. This high-voltage tube generates microwave energy to cook food.

Microwave not heating or humming loudly? The high-voltage diode converts AC to DC for the magnetron. Repair takes 30-45 minutes with basic tools.

The Microwave Door Switch is an OEM part for GE microwaves, designed to prevent the microwave from operating when the door is open by interrupting the power whenever the door is not securely closed. The door switch is an essential safety feature.

Symptoms of a failing Microwave Door Switch include:

• The microwave not starting or heating
• Running when the door is opened
• Unusual noises when the door is closed  

Causes of a bad Microwave Door Switch can result from repeated opening and closing of the door or slamming that can cause the switch to degrade or become misaligned, leading to intermittent or failure.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Microwave Door Switch is an OEM part for GE microwaves, designed to prevent the microwave from operating when the door is open by interrupting the power whenever the door is not securely closed. The door switch is an essential safety feature.

Symptoms of a failing Microwave Door Switch include:

• The microwave not starting or heating
• Running when the door is opened
• Unusual noises when the door is closed  

Causes of a bad Microwave Door Switch can result from repeated opening and closing of the door or slamming that can cause the switch to degrade or become misaligned, leading to intermittent or failure.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This small replacement cushion pads the oven lamp cover to prevent vibration and keep the glass cover seated securely. It restores a snug fit so the lamp cover doesn't rattle or shift during oven use. What it does:

• Cushions and centers the oven lamp cover to reduce rattling and vibration
• Helps keep the lamp cover properly seated and aligned with the housing
• Protects the lamp glass from direct contact with metal edges
• Can be used if the original cushion is torn, missing, or hardened

• One oven lamp cover cushion

• Disconnect power to the appliance before servicing; allow the oven to cool completely
• Remove the lamp cover and replace the worn or missing cushion, then re-seat the cover
• Handle the lamp glass carefully to avoid breakage; wear gloves and eye protection
• If the cover or lamp assembly is cracked or damaged, replace the damaged components rather than relying solely on the cushion

Mounting bracket for microwave installation. Replaces broken, bent, or missing brackets that secure the microwave to the wall or cabinet during setup.

This is a humidity sensor mounted inside the microwave that detects moisture levels in the cooking cavity. It enables auto-cook and auto-reheat functions by signaling the control board when food has released enough steam. Replace this sensor if auto-cook cycles consistently overcook or undercook food, or if the microwave displays a sensor error code.

Ceramic

This is a small retaining spring used in the door assembly of a range or oven. It helps secure the door key or latch mechanism in place, ensuring the door closes and stays shut properly. Replace this spring if your oven door feels loose, won't latch securely, or if the original spring is broken, stretched, or missing.

This wire harness routes power and signals between an appliance's control board and its components, restoring reliable electrical connections and enabling normal operation. Replace a damaged harness to stop intermittent power or component failures. What it does

• Carries power and control signals between the control board and components (motors, switches, valves).
• Replaces frayed, burned, or broken wiring that can cause intermittent operation or complete failure.
• Stops electrical arcing, sparking, or unusual heating at connectors that indicate a damaged harness.
• Restores secure plug-and-socket connections that prevent loose contacts and intermittent faults.

• One wire harness assembly as shown.

• Disconnect power at the breaker or unplug the appliance before starting work.
• Match connector shapes and wire colors to originals; secure harness with existing clips or ties.
• Inspect mating connectors and control board for heat damage; replace if corroded or melted.

Replacement use and care manual for your microwave. Includes operating instructions, maintenance guidelines, and safety information for proper use.