Parts for Ge JES1133WD01: 01 - Microwave Parts

A single truss-head tapping screw used to secure panels, brackets and components in appliances. Its wide head helps distribute load and reduces panel pull-through for a stable fit and quiet operation. What it does

• Fastens metal or plastic panels, trim pieces and small brackets
• Replaces missing or damaged screws that cause loose panels or rattling
• Designed to cut its own mating thread for secure engagement
• Wide truss head spreads load to protect soft or thin materials

• Use the correct-size screwdriver or bit to avoid stripping the head
• Start straight and apply steady pressure so the screw cuts clean threads
• Do not overtighten — stop when seated to avoid cracking plastic or stripping threads
• Disconnect power to the appliance before servicing and follow OEM safety guidance

Replace your microwave's burnt-out light bulb to restore cavity and cooktop illumination. Improves visibility while cooking. Confirm fit with your model.

Binding head screw secures panels and brackets inside your microwave or wall oven. Replace if screw is stripped, missing, or damaged during service.

Outer case back screw for microwaves. Secures the back panel to the microwave cabinet. Replace if screw is stripped, missing, or damaged.

Fix a microwave that overheats or shuts off during use with this blower wheel. Replaces worn fan blades that cause poor ventilation and cooling issues.

Microwave not heating? The magnetron generates the radiation that cooks food. Moderate DIY repair—discharge capacitor first, then swap 3 screws.

Microwave won't heat or shuts off unexpectedly? This thermal cutoff thermostat prevents overheating. Common fix for temperature safety issues.

This HVC mounting bracket secures the HVC assembly inside the appliance to keep components aligned and stable during operation. It restores proper positioning and reduces noise or movement caused by a loose bracket. What it does:

• Provides a mounting point to hold the HVC assembly securely in place
• Prevents vibration and rattling from a loose or damaged bracket
• Keeps electrical and mechanical components aligned for reliable operation
• Helps stop intermittent contacts or shifting that can cause unusual noises

• One HVC mounting bracket

• Disconnect power to the appliance before beginning any repair
• Use basic hand tools; keep track of mounting hardware for reassembly
• Inspect surrounding parts and wiring for damage before reinstalling
• Replace corroded or stripped fasteners to ensure a secure fit

The Door Interlock Switch is an OEM part for GE microwaves. It ensures the safety of the microwave by preventing the appliance from operating while the door is open. This switch is part of a microwave's safety mechanism, which includes multiple interlock systems designed to stop the generation of microwaves immediately once the door is opened, thereby protecting users from exposure to microwave radiation.

Signs that it's time to replace your door interlock switch include the microwave not starting or stopping unexpectedly, the microwave continuing to operate with the door open, or a failure to heat food even though the appliance seems to be running. 

Symptoms of a bad Door Interlock Switch include:

• Microwave does not start
• Microwave stops unexpectedly
• The microwave operates with the door open
• Microwave turns on but does not heat food

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This molded air duct directs cooled air inside the refrigerator to maintain even airflow and temperature distribution. Replacing a damaged duct restores proper circulation and helps reduce warm spots and uneven cooling. What it does:

• Routes conditioned air from the evaporator into cabinet compartments for consistent cooling
• Helps maintain temperature balance between freezer and fresh-food sections
• Prevents drafts or bypass that can cause localized warm spots or frost buildup
• Works with vents, fans and dampers to control internal airflow

• One air duct

• Disconnect power to the appliance before beginning any repair
• Access typically requires removing interior liners or shelves; handle plastic panels and clips carefully to avoid breakage
• Align tabs and mounting points; secure with original screws or clips
• If airflow problems persist after replacement, inspect related vents, dampers and the evaporator fan

This molded resin cover is a protective plastic shield used inside the microwave. It helps protect internal components and ducting from splatter and debris and restores a secure, finished fit when the original cover is cracked or missing. What it does:

• Shields internal components from grease, steam, and food splatter inside the unit
• Helps maintain proper airflow paths and a snug, rattle-free fit
• Common replacement when the original cover is cracked, warped, loose, or missing
• Visual cue: exposed internal parts or a cover that won't stay secured

• One resin (plastic) cover

• Disconnect power (unplug or switch off the breaker) and allow the unit to cool
• Access the cover location; remove retaining screws/clips and keep hardware for reuse
• Align the new cover and secure it without overtightening
• Ensure the cover is fully seated and not contacting nearby moving parts before restoring power

Replacement leg for microwaves. Installs on the bottom to support and stabilize the unit. Needed when original legs are cracked, broken, or missing.

Color: brown. Each prong measures about 5 inches from the center.

Replacement push-button spring for microwave control panels. Restores button return tension when original spring is worn, broken, or missing. Installs behind button.

The door latch key is part of the safety mechanism that secures the microwave door and prevents operation when the door is open. Positioned within the door latch assembly, it requires replacement when the microwave won't start despite the door being properly closed or when error messages appear.

The Fuse is an OEM part for GE microwaves. It serves as a safety device designed to protect the microwave from excessive current that can cause overheating and potential fire hazards. When the current flowing through the microwave circuit exceeds a certain level, the fuse blows or breaks, cutting off the power to prevent damage or fire.

Common causes for a fuse to blow include power surges, faulty wiring within the appliance, or the use of microwave inappropriate containers that cause sparks. It is essential to address these issues not only to replace the fuse but also to correct the underlying problems to prevent future failures.

Symptoms of a bad fuse include:

• The microwave suddenly stops working.
• No signs of power or response even when the microwave door is closed and the start button is pressed.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.