Parts for Craftsman 917204170: Mower Deck / Cutting Deck Parts

This is a lift bagging blade for riding lawnmowers or tractors. Made to ensure that grass clippings make their way into attaching bagging units, they will wear down easily over time. The constant friction against the cutting edge also guarantees that a replacement will be necessary over the lifetime of the machine. Made of durable metal, the lift bagging blade installs relatively easily, but methods and tools required are going to vary based on the type of machine in use. Typically a socket set and file will be necessary for replacement. It is essential to follow the owner's manual when changing this blade and to ensure that the proper hardware is used, and to replace bolts or other components if they show signs of wear or failure. This OEM part fits 54 deck lawn tractors within the following brands: Husqvarna, Poulan, Roper, Sears/Craftsman, and Weed Eater, and others. This ships as an individual unit.

This is a greaseable mandrel kit, also called a blade spindle assembly. It is the part of a riding lawnmower where the blade assembly fits. It's attached to the bottom of the engine with four self-tapping screws, which assure the stability of the spindle when the blades are turning. The mandrel assembly is a part of the riding mower that is intentionally meant to be the most breakable. This is by design, so the other, more expensive, more challenging to repair parts are spared. As a result, mandrels often need to be replaced. If you have to replace the mandrel, first take off the blade assembly and the mandrel cover. After removing the nut holding the pulley in place, remove the pulley. From there, it’s just a matter of unscrewing the four bolts holding the mandrel to the cutting deck. Replace the original mandrel with the new unit and walk back through the disassembly instructions. This is a genuine OEM part manufactured by Husqvarna and Poulan. The mandrel is also compatible with Ariens, Dixon, and Craftsman. This OEM part is sold individually.

This spindle shaft assembly is a genuine Husqvarna part, sold individually. This spindle shaft assembly can be used as a replacement part for a lawn mower. The purpose of a spindle shaft assembly is to maintain the placement of the spindles so they can freely rotate along with the blades of the appliance.Damage could come in the form of puncturing, scraping, cracking, denting, or erosion. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This spindle shaft assembly is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Ariens, and Dixon.

This part is a gauge wheel. A gauge wheel helps support the mower deck of lawnmowers and lawn tractors. The gauge wheel is also what allows the lawnmowers and lawn tractors to move.A new gauge wheel may be needed if the old one is physically broken or damaged in any way. The gauge wheel may need to be replaced after prolonged use due to build up of normal wear and tear. One of the most common ways that the gauge wheel is broken is when the lawnmower or lawn tractor runs over a small stump or concrete. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine Husqvarna part and is an OEM part sourced directly from the manufacturer. It is sold individually. The gauge wheel is compatible with lawnmowers and lawn tractors manufactured by Husqvarna, Rigid, Poulan, and Jonsered.

This is a mandrel cover specifically for the right-hand deck of certain mowers. The item serves a simple but important function. It provides a cover for the mandrel assembly on the mower. The assembly has a range of moving parts and needs to have protection that covers it to reduce the risk of damage. This cover is made from quality plastic and will help to keep the mandrel safe.Many things could happen to necessitate a replacement of the mandrel cover. The piece might wear down over time and crack. It could be broken off. One of the pieces that help hold it onto the mower could break, and it might no longer fit properly. Regardless, it will need to be replaced as soon as possible. The replacement process is easy and should not take more than a few minutes in most cases.This right-hand deck mandrel cover is compatible with select models of mowers from Husqvarna and Craftsman. The item is sold individually, and it is a genuine OEM replacement part sourced right from the manufacturer.

This left hand mandrel cover is a genuine Husqvarna part, sold individually. This left hand mandrel cover can be used as a replacement part for a lawn mower or a lawn tractor. The left hand mandrel cover serves as a means of protecting the mandrel of a lawn mower or a lawn tractor; the purpose of the mandrel is to attach to the deck and facilitate the rotation of the blades.The left hand mandrel cover might have to be ordered in place of a mandrel cover that has been damaged or broken. This damage can manifest in the form of tears, scrapes, punctures, or erosion to the material such that the mandrel is exposed to the elements or to general wear and tear from long-term usage. If this is the case, the left hand mandrel cover should be ordered as a genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This left hand mandrel cover is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Jonsered.

This part is a replacement pivot bushing. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or worn pivot bushing in a variety of lawn tractor models.Pivot bushings allow different components to pivot around one another without causing too much friction, vibration, or heat. Bushings are particularly subject to wear and tear and will likely need to be replaced when worn or ineffective in order for the lawn tractor to function properly. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to install this pivot bushing, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this pivot bushing is suitable for use on lawn tractors manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This replacement part is a torsion spring. This is a genuine replacement part made by Husqvarna. This part works within a machine to provide torque to different parts so that the machine can run smoothly and properly. A new torsion spring might be needed if the current one is missing or damaged in any way including being dented or bent. Because of the nature of the spring, this part could snap under pressure and need to be replaced. Work gloves are recommended during this repair as springs can be dangerous if handled improperly. Be sure the engine is off before starting this repair as running parts may affect the installation.This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part for long-lasting use.

This is a spring that is used on many Husqvarna lawnmowers. The component is located in the middle of the retainer and at the drive disk on the rear-wheel drive system. The main purpose of the spring is to ensure proper tension is applied between the drive disk and the pinion gear. Through time or wear and tear, this spring can become damaged or break. If this occurs, the component will need to be replaced in order to use the lawnmower.A screwdriver, socket set, and work gloves will be needed to replace this part. Make sure the lawnmower is powered off and the spark plug has been removed. Take the lawnmower and place it on a solid and sturdy surface while working on it. Remove the wheel where the spring is broken and take out the pinion, pawl, and spring. All of these items can be replaced or the pawl and pinion can be reused with the new spring.This spring is made for several lawnmowers manufactured by Husqvarna. The component is sold on an individual basis. This is a genuine OEM replacement part that is sourced directly from the manufacturer.

This nose roller is a genuine Husqvarna part, sold individually. This nose roller can be used as a replacement part in a lawn mower. This part props the front of the mower deck up.The nose roller could be subject to damage in the form of puncturing, tearing, ripping, scraping, denting, or eroding; if any of these forms of damage prevent the nose roller from protecting the deck, the nose roller should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This nose roller is compatible with the following outdoor appliance brands: Husqvarna, Jonsered, Craftsman, and Poulan.

This rod roller nose, also sometimes referred to as an axle, is a genuine Husqvarna part. It is a replacement part for lawn mowers.This part attaches to the deck of the mower and prevents it from running into the ground while in operation. This prevents damage to other parts of the mower and can also help prevent an accident. It is not uncommon for the rod roller nose to become damaged or break as a result of normal wear and tear, especially under heavy use or after several years.This rod roller nose is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is manufactured for compatibility with mowers made by Husqvarna and Poulan.

This replacement part is a reinforcer plate. This is a genuine replacement part made by Husqvarna. This part commonly attaches to the deck of the lawnmower. The reinforcer plate helps ensure that different parts are completely secure and properly attached while in use.A new reinforcer plate might be needed if parts are not attached properly. If parts of the lawnmower are coming loose it is best to replace the reinforcer plate so that everything is secure. This repair should be simple and only require common household tools such as a screwdriver and perhaps pliers.This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This is a genuine OEM replacement part to ensure long-lasting use.

This idler arm is a genuine Husqvarna part, sold individually. This idler arm can be used as a replacement part in a lawnmower. This part secures the steering linkage while allowing it free range of motion. If the idler arm is punctured, dented, cracked, chipped, scraped, warped, or eroded, it should be removed and replaced by this genuine OEM replacement part as soon as possible in order to ensure safe continued use.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This idler arm is compatible with the following outdoor appliance brands: Husqvarna.

The washout port helps to make cleaning a mower deck easier and it is used on mowers and tractors. Users should wash the deck of the mower to reduce buildup. Doing so will help owners to extend the life of the mower deck. The washout port is the area that attaches to the deck of the machine. Owners can attach a hose and clean away grass and debris that have built up under the deck.The washout port is made from metal and is durable. However, there could still be a need to replace it in the event it becomes damaged or corroded. Replacement of the washout power is relatively simple. It will require the use of a socket set and a wrench set.This washout port is a genuine OEM replacement part for use with certain models of lawn tractors from Husqvarna, Craftsman, Jonsered, and Poulan. It is sold individually.

This part is a replacement hexagon screw. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current hexagon screw is broken, misplaced, or in any way damaged, this part can be used as a replacement. It is intended for use with outdoor power equipment.Hexagon screws are a standard piece of hardware that get their name from the hexagonal shape of the screw head. They have multiple different uses. Screws are critical for properly securing parts of the equipment, and may require replacing if stripped, corroded, lost, or otherwise defective. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this hexagon screw, the appropriate owner's manual and equipment diagrams should be referred to. This hexagon screw is suitable for use on outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. This part is sold individually.

The shoulder bolt has many applications in lawn equipment, but this model is designed for use in riding mowers. The job of this shoulder bolt is to keep the gauge wheel in the correct place. This part is often referred to as the roller bolt. Over time, this bolt can become worn from regular use. The threads on the bolt may strip or it may become damaged as a part of other repairs or incidents. In any situation, the best option would be to replace the bolt with this genuine OEM model from Husqvarna. This shoulder bolt is manufactured to exact specifications for replacement in the gauge wheel. This part is designed for use with riding lawn mowers from Poulan, Husqvarna, and Jonsered. It is compatible with several machines from these brands. This shoulder bolt is made of durable metal and requires a wrench for installation. It is sold as a single unit and does not include any other parts. Always wear gloves when replacing parts for hand protection. Be sure to disconnect the spark plug prior to doing engine work. This part includes a one-year warranty from the manufacturer.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This genuine Husqvarnascrew can be used as a replacement part for lawn mowers and lawn tractors. The screw is a small piece that is generally used to fasten materials to one another.Screws are small parts that are frequently lost or misplaced as they can unscrew and detach without necessarily impacting the appliance immediately. They may also becoem broken, stripped, or corroded. If a screw is lost, misplaced, or suffers damage that prevents it from continuing to affix components to one another, the screw should be removed and replaced immediately with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following brands: Husqvarna, Poulan, Ariens, and Weed Eater.

This part is a nyloc nut. This specific nut is used in many different applications depending upon the outdoor power equipment machine that it is used on. This nut has a nylon collar insert that resists turning when it has been threaded on correctly. The nyloc nut is a type of lock nut, which prevents loosening when it's exposed to vibrations. It helps fasten parts together.A new nyloc nut may be needed if the original one has been broken, damaged, or lost. If the nyloc nut is no longer staying in place when it is exposed to vibrations and the operator can notice the parts loosening, then the nyloc nut will need to be replaced.This is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This nyloc nut is used on snowblowers that are manufactured by both Husqvarna and Craftsman.

This top lock flange nut is a genuine Husqvarna part, sold individually. This top lock flange nut can be used as a replacement part for lawn mowers. The purpose of a top lock flange nut is to provide a fastening component, in conjunction with a bolt, through which two parts can be affixed to one another through clamping and rotation.The top lock flange nut is a small fastening component that can be easily lost and misplaced. If components come loose as a result of a lost top lock flange nut, the component should be replaced by this genuine OEM replacement part. Additionally, over time, a top lock flange nut can be stripped or eroded beyond functionality, in which case the component should be replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This top lock flange nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Dixon, Poulan, and Aries.

This replacement part is a hex nut. It is a genuine replacement part made by Husqvarna. This part is small yet very important to the overall operation of many different appliances. Hex nuts are able to hold other parts in place and secure them so that everything can operate smoothly. A new hex nut might be needed if the current ones are damaged or missing. The repair should be fairly easy and only require a screwdriver or pliers if the previous part is stuck. It is possible that nuts can become stripped or lodged over time and should be replaced when this occurs. Be sure the engine is completely powered down before starting a repair. This is a genuine OEM replacement part sourced directly from the manufacturer. This nut is sold individually. Be sure to purchase the correct amount as many appliances require more than one.

This part is a genuine OEM replacement mandrel spacer washer usually used to line up drive pulleys on lawn tractors or riding mower engines. The drive pulley is an integral part of the transmission. As a type of washer, a mandrel spacer helps to distribute weight and pressure so that the link does not crack or bend. Compared to standard washers, though, mandrel spacers are quite thick, so they can take more of a load. The best time to replace a mandrel spacer washer is when making repairs to the drive pulleys. These parts take a lot of wear and tear and can corrode the connection over time. To prevent this from happening, replace the mandrel spacer washer as soon as it starts to look worn out or when conducting regular maintenance. This mandrel spacer washer is a top of the line replacement part for Ryobi, Jonsered, Weed Eater, Poulan, and Husqvarna engines. As such, this part comes sourced directly from its original manufacturer. This spacer washer does not ship with any additional hardware.

This genuine Husqvarna bolt and washer replacement part is specifically engineered to hold and secure the lawnmower blade in place. The bolt is threaded while the washer has a curved or rounded headed. A washer is needed for even load distribution of the threaded bolt. Fastening the bolt without the fastener may cause stress to the material it's driven into. One of the warning signs that the bolt and washer are broken is if the lawnmower blade doesn't rotate properly. Instead of moving in one circular motion, it turns erratically and goes up and down. In some cases, it will make a loud grinding noise during cutting. The lawnmower blade may even fly out from its normal position. Replacing the worn-down bolt and washer is fast and straightforward. First, shut down the engine and let it cool. Then, take out the spark plug and turn the mower on its side. Use a socket to remove the old bolt and washer. Then, grab the replacement and insert it through the blade's hole. Tighten it using the socket. This original Husqvarna bolt and washer is only suitable for lawnmowers made by Husqvarna, Craftsman, and Weed Eater. It is also compatible with some Dixon and Poulan lawnmowers. This bolt and washer replacement is sold individually.