Need Help?
Call or text
Show parts
Usually ships within 4 - 14 days
This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.
This part is a replacement suspension arm. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective suspension arm in a variety of lawn tractor models.The suspension arm makes the tractor more comfortable and easier to drive, as it absorbs impact and vibration when driving over rough or unterrain. If the suspension arm is worn, snapped, or otherwise defective, it should be immediately replaced. It's important when working on or near to an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this suspension arm, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this suspension arm is suitable for use on several different models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. Please This is a genuine part made of high-quality, durable materials and is sold individually.
This genuine Husqvarna bolt and washer replacement part is specifically engineered to hold and secure the lawnmower blade in place. The bolt is threaded while the washer has a curved or rounded headed. A washer is needed for even load distribution of the threaded bolt. Fastening the bolt without the fastener may cause stress to the material it's driven into. One of the warning signs that the bolt and washer are broken is if the lawnmower blade doesn't rotate properly. Instead of moving in one circular motion, it turns erratically and goes up and down. In some cases, it will make a loud grinding noise during cutting. The lawnmower blade may even fly out from its normal position. Replacing the worn-down bolt and washer is fast and straightforward. First, shut down the engine and let it cool. Then, take out the spark plug and turn the mower on its side. Use a socket to remove the old bolt and washer. Then, grab the replacement and insert it through the blade's hole. Tighten it using the socket. This original Husqvarna bolt and washer is only suitable for lawnmowers made by Husqvarna, Craftsman, and Weed Eater. It is also compatible with some Dixon and Poulan lawnmowers. This bolt and washer replacement is sold individually.
This type of lawnmower blade is characterized by deeper curves on the ends, which create enough suction to circulate and expel the grass clippings into a bagger. It is designed to improve the way clippings are ejected out of the discharge chute. It also has larger wind wings that increase airflow. This helps prevent clogging when mowing wet or tall grass. Without a bagger, these blades put excess load on the engine and don't expel clippings as efficiently as low lift blades. The wear and tear on a high lift blade are considerable, so there's a risk of using a dull blade without regular replacement. Blade erosion can happen over time due to debris, and the mower may offer noticeably less efficient performance when cutting grass. It is time to replace the blade if it has nicks and dents. For the average homeowner, a good rule of thumb is to replace the mower blades annually. This part is compatible with specific models from Ariens, Craftsman, Husqvarna, Poulan, and Murray. It is an OEM part sourced directly from the manufacturer and is sold individually.
The Husqvarna outdoor power equipment shoulder bolt is an OEM replacement part that attaches to the suspension arm and wheel bracket. It is primarily utilized for securing components and providing stability in the equipment's assembly. This part fixes the following symptoms:
This part is discontinued by the manufacturer and is no longer available for purchase.
This is a shield deflector, or a grass deflector, that is used on certain models of lawn tractors and walk-behind lawn mowers. The shield deflector is designed to ensure that the debris that expels from the mower deck is not projected upward or toward the person that is mowing. When it is cracked or missing, the clippings and debris could fly out in any direction and cause injury or damage. The shield deflector is made of durable plastic but it is also subject to constant vibrations and ground impact, which can lead to damage. Replacing a broken shield deflector will ensure that the mower is safe to use and that debris is not flying in all directions. This part will require a wrench or socket, as there are two screws or bolts holding it in place. This genuine OEM deflector is manufactured by Husqvarna and can be used with select machines from the brand, as well as certain models from Craftsman, Poulan, and Jonsered. It is sold as an individual part and the hardware to secure the deflector is sold separately.
This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.
This part is a genuine OEM replacement mandrel spacer washer usually used to line up drive pulleys on lawn tractors or riding mower engines. The drive pulley is an integral part of the transmission. As a type of washer, a mandrel spacer helps to distribute weight and pressure so that the link does not crack or bend. Compared to standard washers, though, mandrel spacers are quite thick, so they can take more of a load. The best time to replace a mandrel spacer washer is when making repairs to the drive pulleys. These parts take a lot of wear and tear and can corrode the connection over time. To prevent this from happening, replace the mandrel spacer washer as soon as it starts to look worn out or when conducting regular maintenance. This mandrel spacer washer is a top of the line replacement part for Ryobi, Jonsered, Weed Eater, Poulan, and Husqvarna engines. As such, this part comes sourced directly from its original manufacturer. This spacer washer does not ship with any additional hardware.
The mandrel pulley or spindle pulley is a metal part that spins the blades of a riding mower as it is turned with a belt. Though quite durable, on occasion, something happens to dent or warp the pulley housing, interfering with the turning of the blades and creating a dangerous situation. Once you have found a stationary place for the mower and made certain it cannot be started, drop the mower housing by removing the locking pins and arms. Next, you’ll want to disconnect the spring from the clutch rod. This will allow you to roll the mowing belt off the engine pulley. Remove the deck from beneath the tractor. Using a lubricant, remove the flange nut from the pulley assembly. Next, take the top flange nut off the pulley with a socket wrench. Penetrating oil may be required. Take the pulley from the spindle. Reassembling the unit is a matter of walking back through the disassembly process. This spindle pulley is an OEM replacement manufactured by Husqvarna. In addition, it is compatible with many Craftsmen mowers as well. This OEM part is individually packaged and sold.
This top lock flange nut is a genuine Husqvarna part, sold individually. This top lock flange nut can be used as a replacement part for lawn mowers. The purpose of a top lock flange nut is to provide a fastening component, in conjunction with a bolt, through which two parts can be affixed to one another through clamping and rotation.The top lock flange nut is a small fastening component that can be easily lost and misplaced. If components come loose as a result of a lost top lock flange nut, the component should be replaced by this genuine OEM replacement part. Additionally, over time, a top lock flange nut can be stripped or eroded beyond functionality, in which case the component should be replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This top lock flange nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Dixon, Poulan, and Aries.
This is an authentic idler pulley replacement for use with riding lawn mowers and tractors. It is the same version used on the machine when it was new. The idler pulley is used to provide tension to the belt. This ensures that the belt has the correct tension needed to drive the mower forward. The part is durable, but it may still need to be replaced at some point. It could become corroded over time, it could bend, or it could even break in some cases. If the part becomes damaged, it could mean that the belt no longer has proper tension. This can make it difficult or even impossible to use the machine. It should be replaced as soon as possible. This is an OEM part that comes straight from the manufacturer. It is sold individually and does not come with the hardware needed for replacement. The idler pulley is compatible with more than 150 models of riding tractors and mowers. Compatible brands include Husqvarna, Poulan, and Craftsman.
This is a replacement belt keeper that is designed for use with select outdoor equipment engines. This belt keeper is designed to secure the belt inside of the engine and allow for safe operation of the unit. Over time, this light piece of metal framing can become damaged or worn, causing it to fail to secure the belt as it should. Replacement is the best way to restore the optimal function of the machine and it is important to use genuine parts. This OEM belt keeper replacement is manufactured by Husqvarna and meets exact standards as an OEM replacement. The unit is compatible with select models from this brand, as well as those from AYP, Poulan and Poulan Pro, Weed Eater, Sears/Craftsman, and Roper. The keeper is sold individually and does not come with the hardware required to secure the part. If hardware needs replaced, it will require a separate purchase. Be sure to wear gloves whenever performing repairs on lawn and garden equipment. When working in the engine, especially, it is important to allow the engine to cool and work in a well-ventilated area for safety.
This torsion spring retainer is a genuine Husqvarna part, sold individually. This torsion spring retainer can be used as a replacement part in a lawn mower. This part secures and stabilizes parts within the mower. If the torsion spring retainer loses its basic functionality and cannot be easily repaired, the torsion spring retainer should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This torsion spring retainer is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Ariens.
This idler arm bracket is a genuine Husqvarna part, sold individually. This idler arm bracket can be used as a replacement part in a lawnmower. The purpose of an idler arm bracket in a lawnmower is to stabilize the placement of the idler arm so that the arm has a free range of motion while still remaining affixed to the body of the lawnmower.The idler arm bracket in a lawnmower might have to be replaced if it is damaged. This could occur if the idler arm bracket is punctured, scraped, dented, cracked, warped, or eroded from general wear and tear with long-term use or due to collision with a hard object. If this occurs, the idler arm bracket should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This idler arm bracket is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.
This is a genuine brake arm that is made to be used with select riding lawn mowers. The brake is designed to stop the mower blades by pressing against the pulley when the brake lever has been engaged. When the brake is engaged, the blades will not rotate. This brake arm is a metal bracket that is made of durable materials, but over time it will become worn and could start slipping or even prevent the brake from working at all. If this happens, the mower will not be able to operate until it is fixed.The replacement process is not difficult, but it is one that should be done with care. To start, disconnect the power and allow the machine to cool. Always wear gloves when replacing engine parts and other components, as well. This OEM brake arm is manufactured by Husqvarna and meets exact standards for original replacement parts. It is sold as an individual part and does not include any necessary hardware. That will require an additional purchase if a replacement is needed. This brake arm is compatible with machines from Husqvarna, as well as those from Poulan.
The replacement mower arm brake pad is sourced directly from the manufacturer. It is used with lawn tractors and is made from metal with an attached brake pad. The arm connects to the idler arm, which helps the driver of the lawn tractor to control the machine's speed. It is an important part of the machine that needs to be in good condition. However, this part could start to wear out over time, just as would happen with brake pads for other vehicles. This could be due to the normal wear and tear associated with using the tractor, or it could be due to corrosion or breaking. Owners will likely require a wrench when replacing the mower arm brake pad. This is a genuine OEM replacement mower arm brake pad, and it is sold individually. The part is for use specifically with certain makes and models of lawn tractor. It will work with more than 150 different machines. Compatible brands include Husqvarna, Craftsman, Poulan, and Ariens.
This is a replacement deck drive belt that has been sourced from the manufacturer. This belt is made specifically for use with garden tractors and riding mowers. The purpose of the belt is to rotate the blade on the mower. It is located on the mower's deck. Belts such as these tend to wear out over time. They can become stretched and loosen, and they can even start to crack and break. If this happens with the deck drive belt, the mower blades will no longer rotate properly, which means the user cannot cut the grass. Owners should check the belts on their mowers regularly and replace them as needed. This helps to ensure they do not start mowing with a bad belt and have it break partway through the lawn. This is a genuine OEM replacement deck drive belt for use with riding mowers and tractors. The belt is made from durable rubber and is sold individually. The belt works with more than 100 models of machine. Compatible brands include Craftsman, Husqvarna, and Poulan.
This part is a clutch assembly that is used for riding lawnmowers and lawn tractors. A clutch is a safety device that stops the blade from spinning while the engine is still running. This part is manufactured out of a heavy-duty metal material.A new clutch assembly may be needed if the lawn tractor or riding lawn mower is stalling. Over time, the clutch may become worn or damaged and need to be replaced as part of normal wear and tear on the product. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This clutch assembly is a genuine Husqvarna part. It is sold individually. This particular clutch assembly is compatible with riding lawnmowers and lawn tractors that are manufactured by the Poulan, Husqvarna, and Jonsered brands.
This replacement part is a bolt and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A bolt is a small but important part in many tools. These parts are able to hold different areas of machinery together so that the different areas of the device stay secure and steady. A new bolt might be needed if the current ones are missing or damaged. If parts on the appliance are falling off or are loose, the user should look into replacing a bolt. To replace a bolt or many bolts, the user must have access to common household tools. Simply remove the old one and use a screwdriver to replace it with a new part. Reference the specific user manual for further directions. This bolt is sold individually and is an OEM replacement part. Note that some devices require more than one screw so be sure to purchase the correct amount.
This gauge wheel is a genuine Husqvarna part, sold individually. This gauge wheel can be used as a replacement part in a lawn mower. The purpose of a gauge wheel in a lawn mower is to facilitate the depth to which the burrowing mechanism of the lawn mower will set so that various levels of depth can be reached within the soil on the lawn.The gauge wheel of a lawn mower might have to be replaced if it suffers damage that precludes it from setting the correct depth for boring. The gauge wheel could be dented, punctured, torn, ripped, eroded, or otherwise damaged in a way that prevents it from serving its function, in which case the component should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This gauge wheel is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.
This left-hand engine belt keeper is designed to be a replacement for riding mowers and lawn tractors. The purpose of the belt keeper is to stabilize the belt. This will help to reduce the amount of friction on the belt. If this part is damaged or missing, it could cause problems with the belt including premature wear and tear. In some cases, the mower will not function properly.The part is made from durable metal, but there is still a chance that it could break or become worn and corroded over time. If the owner notices any signs of damage, the belt keeper should be replaced right away to ensure the mower continues to function properly.The engine belt keeper can be used for many models of machines from Husqvarna, Poulan, Weed Eater, and Jonsered. The high-quality metal replacement piece is sold individually. It is a genuine OEM part that has been sourced directly from the manufacturer.
This part is a belt keeper. The belt keeper guides the path of a tractor belt that is between pulleys. The belt that these belt keepers hold is what transfers power to another pulley in the system, making the equipment run. A new belt keeper may be needed if the belt keeper is physically broken or damaged. If the belt routinely comes off of the belt keepers, this could be a sign that the belt keepers need to be replaced. Use caution when working with these parts. The operator should only perform care and maintenance on the machine when it is powered off. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This part is a genuine Husqvarna part and is an OEM part sourced directly from the manufacturer. It is sold individually. This belt keeper is compatible with lawn tractors manufactured by Husqvarna and Craftsman.
This flat idler pulley is an original OEM part sourced directly from the manufacturer, Husqvarna. It is sold individually. A flat idler pulley is used in conjunction with the belt to transfer power from the engine to the machine, specifically designed for use with outdoor lawn and garden power equipment such as lawn mowers. It is compatible with mowers by brands such as Husqvarna, Poulan, and Weed Eater.The flat idler pulley part is crucial for the proper functioning of the lawn mower. The purpose of the the flat idler pulley part is to connect to the idler bracket. When this process functions properly, the flat idler pulley will then apply tension to the v-belt. The replacement or repair process of the flat idler pulley should be straightforward, although the user replacing the part should plan on using a wrench. Always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.This flat idler pulley is made out of metal.
This is a manual cable clutch for use on many different kinds of lawn tractors and riding mowers. It is the part that connects the transmission lever to the idler arm on the deck of the mower. The sole purpose of this component is to engage and then to disengage the blades. It is for a machine with a manual clutch and includes the full assembly. This means it features the spring hook, connector clips with cable sheath, and the cabling itself. It is relatively simple to replace this item and requires an appropriately sized socket set. Made of rubber, metal, and wire, it is a genuine OEM part that ships individually as an assembly. It will work with brands like Poulan, Jonsered, Weed Eater, and Husqvarna, among others.
This stud fastener is a genuine Husqvarna part, sold individually. This stud fastener can be used as a replacement part for a lawn mower. The purpose of a stud fastener is to fasten components to one another with a threaded bar that attaches at its ends to make a bolt.The stud fasteners within a lawn mower might have to be replaced if one or more of them are lost, misplaced, or worn out over time. This could occur if the stud fasteners fall out of the appliance, in which case they should be immediately replaced by this genuine OEM replacement part, or if they are stripped over time from general wear and tear from long-term use. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This stud fastener is compatible with the following outdoor appliance brands: Husqvarna and Poulan.
A hex screw can be used on a variety of different types of lawn and garden equipment. On small machines, it can be used to hold the housing together while on larger machines, it might be used to mount on the gas tank. It's versatile with the ability to secure items including wood, plastic, metal, and brick together. The screw is made of high-quality metal and measures 5/16-18 x ¾ inches. Sometimes these screws can become stripped, get damaged, or even break and will need to be replaced.Inspect the screw for any damage, looseness, or debris that might be causing issues. If the damage is major or the screw is stripped, it will need to be replaced. In most cases, the screw can be removed using nothing more than a screwdriver before inserting the replacement screw. For stripped screws, pliers may be needed to get the original screw out of the equipment.This hex screw is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. The screw is compatible with lawnmowers, string trimmers, snowblowers, and tillers by Craftsman, Ariens, Husqvarna, Poulan Pro, Weed Eater, and Poulan.
The washout port helps to make cleaning a mower deck easier and it is used on mowers and tractors. Users should wash the deck of the mower to reduce buildup. Doing so will help owners to extend the life of the mower deck. The washout port is the area that attaches to the deck of the machine. Owners can attach a hose and clean away grass and debris that have built up under the deck.The washout port is made from metal and is durable. However, there could still be a need to replace it in the event it becomes damaged or corroded. Replacement of the washout power is relatively simple. It will require the use of a socket set and a wrench set.This washout port is a genuine OEM replacement part for use with certain models of lawn tractors from Husqvarna, Craftsman, Jonsered, and Poulan. It is sold individually.