Parts for Poulan PRGT2046A: Mower Deck Parts

This is a spindle shaft with bearing that is made for use with various lawnmowers. The spindle shaft is the component that helps to rotate the blade found underneath the lawnmower deck. The shaft assembly includes both the shaft and the bearing needed to make it function. The spindle shaft can sometimes become damaged which may result in unusually loud noise coming from the mower if the blades spin at all. If the spindle shaft is broken or otherwise damaged, it will need to be replaced.A 5/8 inch socket, a ½ inch socket, a 7/8 inch socket, and an impact driver will be needed to replace this part. First, make sure the lawnmower has been powered off and the spark plug wire has been disconnected. The lawnmower should be placed on a stable surface, as well. Drop the deck and remove the bolts to take out the spindle shaft and replace it with a new part.The spindle shaft with bearing is a genuine OEM replacement part that is directly sourced from the manufacturer. This component is sold on an individual basis. This part is made to be used with lawnmowers manufactured by Craftsman, Poulan, and Husqvarna.

This part is a replacement mandrel housing. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken mandrel housing in a variety of lawn tractor models. The mandrel housing is an essential part that houses the shaft, which in turn rotates the tractors blades. This part will need to be replaced if faulty or ineffective in any way. When working on or near an enginee, it is important to ensure the equipment is powered down and completely cool before beginning repairs. For more accurate information on how and where to place this mandrel housing, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this mandrel housing is suitable for use on lawn tractors manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This part is a grass-clipping deflector cover that is used on lawn tractors. A grass-clipping deflector cover's purpose is to cover the discharge port on the deck of the lawn tractor.A new grass-clipping deflector cover may be needed if the current one is cracked, broken, or damaged in any way. If the grass-clipping deflector experiences an impact collision with a hard object such as a rock, tree stump, or landscaping block, it is likely to become damaged and need to be replaced. If this part is missing, a new grass-clipping deflector cover will be needed. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This grass clipping deflector cover is a genuine Husqvarna part. It is sold individually. This particular grass clipping deflector cover is compatible with lawn tractors that are manufactured by Husqvarna and Craftsman.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This idler pulley is a genuine replacement part for select riding lawn tractors. The idler pulley mounts to the mower deck and is attached to the mower belt. When the engine is engaged and the mower is driving, the pulley is responsible for guiding the path of the belt. This pulley is subjected to repetitive motion, constant vibrations, and other damage and can become worn or broken over time. Replacing the pulley will ensure proper operation and guidance of the belt. This OEM part can provide a solution for compatible tractors. This genuine idler pulley replacement is designed for use with mowers from brands like Husqvarna, RYOBI, Poulan, Jonsered, and Weed Eater. This idler pulley is made of durable metal and sold as a single unit. No other hardware is included with the purchase. Always disengage the spark plug and wear gloves when working on belts or under the mower deck, such as in the case of replacing this pulley.

This is an idler pulley. It is a genuine Husqvarna part. It is a replacement part for lawn tractors and riding mowers. The idler pulley allows the engine to start by applying tension to the blade belt. It is not uncommon for the pulley to become damaged through normal wear and tear, and it can also be damaged in an accident. If this happens, the machine may not start properly or at all. Check the user manual for instructions for replacing it. Some disassembly of the mower deck may be required. Be sure to allow the engine to cool completely, empty the fuel tank, and disconnect the spark plug before attempting any repair.This pulley is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. It is made to be compatible with mowers and tractors manufactured by Husqvarna, Craftsman, and Poulan.

This part is a replacement mandrel cover. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken mandrel cover in lawn tractors.This part covers and protects the tractor's mandrel from damage caused by dirt, debris, or the elements. This part will require replacing if it is ineffective and cannot protect the mandrel sufficiently. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on installation of this particular mandrel cover, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This mandrel cover can be used with a variety of lawn tractor models manufactured by Husqvarna, Poulan, and other brands.

A V-belt is responsible for transmitting energy. It is made from a thick and sturdy rubber material. It features grooves for improved traction and measures ½ x 95-1/2. A worn-down v-belt can lead to inefficient energy loss, and therefore poor performance. Installing this v-belt requires pliers and a wrench. First, the spark plug wire needs to be removed. Then, position the mower deck to the lowest possible level. Move the machine's blade engagement level to OFF. Remove the belt found from the engine pulley. Don't forget to take out the bow-tie pins and blade engagement cable as well. Remove the bolt from the pulley cover and loosen the nuts found at the idler pulley. Put the new belt and then tighten the nuts on the idler pulleys. The deck can now be re-assembled to its original position. This Husqvarna 532144959 V-Belt OEM Replacement can help keep a lawnmower in top condition. This genuine Husqvarna made V-belt is specifically for driving the blades on a lawnmower. It is compatible with Ariens, Craftsman, Poulan Pro, Dixon, and Husqvarna mowers. This V-belt is sold individually.

This replacement part is a washer. This part is able to work with other small parts to ensure that each part is held securely in place during use.If the washer has been stripped due to normal wear and tear, it might be time to replace this part. If the washer has become dented, bent, or cracked, it might not work as effectively as during prior uses. Work gloves are recommended when working with small parts like these. This is a genuine replacement part made by Husqvarna. It is an OEM replacement part which will ensure a proper fit. This part is sold individually.

This weld nut is used for lawn mowers, tillers, and tractors to hold certain components together for high durability. These nuts can be found on various parts of lawn equipment and are distinguished by a small hole in the middle and a glossy golden color. Unlike typical nuts, they cannot be added or removed using a hammer or screwdriver. Sometimes a weld nut can become damaged through use, while other times one of them can go missing. Operating machinery with a missing weld nut can be dangerous since parts aren't held together as tightly as expected. In some cases, the weld nut can become rusty and will need to be replaced. If the weld nut is still in place, an angle grinder can be used to remove it. The nut can be replaced through two different welding techniques including projective or capacitive discharge welding. This weld nut is designed for use in many lawn mowers, tillers, and lawn tractors by Weed Eater, Husqvarna, Craftsman, and Poulan. It is a genuine OEM component that comes as an individual part directly from the manufacturer. Welding equipment and other basic tools will be needed to replace this weld nut on lawn and garden equipment.