Parts for Poulan PRGT22H50A: Mower Deck Parts

This 50-inch blade is made for use with riding lawn mowers by Craftsman and Husqvarna. The blade is the component that is responsible for cutting grass or other foliage when the lawnmower is in use. The blade can become worn over time and will leave grass with frayed edges. If the blade is worn out, it will need to be replaced to create a healthier-looking lawn. Replacing the blade will create a clean cutting edge after regular use of a lawnmower.If the mower blade needs to be replaced, a pair of pliers, a socket set, and a wrench set will be required. Place the lawnmower on a stable surface and pull up the blade deck for better access to the 50-inch blade. Take out the blades and the sheared pins before replacing them with new components. Reassemble the deck and test the lawnmower before use.This is an authentic OEM replacement component that is directly sourced from the manufacturer. It is sold as a single part. The 50-inch blade is made to be used in several lawn mowers and lawn tractors manufactured by Husqvarna and Craftsman.

This is a spindle shaft with bearing that is made for use with various lawnmowers. The spindle shaft is the component that helps to rotate the blade found underneath the lawnmower deck. The shaft assembly includes both the shaft and the bearing needed to make it function. The spindle shaft can sometimes become damaged which may result in unusually loud noise coming from the mower if the blades spin at all. If the spindle shaft is broken or otherwise damaged, it will need to be replaced.A 5/8 inch socket, a ½ inch socket, a 7/8 inch socket, and an impact driver will be needed to replace this part. First, make sure the lawnmower has been powered off and the spark plug wire has been disconnected. The lawnmower should be placed on a stable surface, as well. Drop the deck and remove the bolts to take out the spindle shaft and replace it with a new part.The spindle shaft with bearing is a genuine OEM replacement part that is directly sourced from the manufacturer. This component is sold on an individual basis. This part is made to be used with lawnmowers manufactured by Craftsman, Poulan, and Husqvarna.

This part is a replacement mandrel housing. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken mandrel housing in a variety of lawn tractor models. The mandrel housing is an essential part that houses the shaft, which in turn rotates the tractors blades. This part will need to be replaced if faulty or ineffective in any way. When working on or near an enginee, it is important to ensure the equipment is powered down and completely cool before beginning repairs. For more accurate information on how and where to place this mandrel housing, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this mandrel housing is suitable for use on lawn tractors manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This replacement part is a hinge rod. This is a genuine replacement part made by Husqvarna. This part is intended for use in different areas of the machine in which things are able to turn or rotate on a hinge. A new hinge rod might be needed if the current one is damaged in any way. This can include being dented, bent, or cracked. If the rotating or turning mechanism is no longer working, it might be due to a faulty hinge rod. Be sure to wear work gloves during this repair to ensure safety during the job. It is also recommended that the user refers to the proper manual before beginning to repair or replace this part. This part is also sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit.

This is the replacement washer head screw for a lawnmower or lawn tractor. It is black in color and is roughly 1.5 inches in length. With its hexagonal head and washer face, it is usually used as a fastener in outdoor power tools. It is self-tapping, meaning it can tap its own threads when screwed into either plastic, wood, or metal. When used with lawn tractors and lawnmowers, this screw is commonly employed for securing the mandrel housing to the mower deck. Replace the washer head screw if the old screw is damaged or missing. First, a pilot hole should be made that's slightly smaller than the diameter of this screw before driving it with a screwdriver. This is also a thread-forming type of self-tapping screw, and it does not have a pointed tip. It is compatible with specific products from major brands like Ariens, Craftsman, Husqvarna, Murray, Poulan, Ryobi, and Weed Eater. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

This idler pulley is a genuine replacement part for select riding lawn tractors. The idler pulley mounts to the mower deck and is attached to the mower belt. When the engine is engaged and the mower is driving, the pulley is responsible for guiding the path of the belt. This pulley is subjected to repetitive motion, constant vibrations, and other damage and can become worn or broken over time. Replacing the pulley will ensure proper operation and guidance of the belt. This OEM part can provide a solution for compatible tractors. This genuine idler pulley replacement is designed for use with mowers from brands like Husqvarna, RYOBI, Poulan, Jonsered, and Weed Eater. This idler pulley is made of durable metal and sold as a single unit. No other hardware is included with the purchase. Always disengage the spark plug and wear gloves when working on belts or under the mower deck, such as in the case of replacing this pulley.

This mandrel pulley is a genuine Husqvarna part, sold individually. This mandrel pulley can be used as a replacement part for a lawn mower or a lawn tractor. The purpose of the mandrel pulley is to regulate the movement and placement of the drive belt so the power of the motor is transferred to the blades of the appliance.The mandrel pulley might have to be replaced if it suffers enough damage that it can no longer serve its crucial function. Signs of damage should be obvious upon a visual inspection and assessment; damage can come in the form of tears, punctures, scrapes, erosion, or any other clear indication that the mandrel pulley has been compromised. If this occurs, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This mandrel pulley is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

A V-belt is responsible for transmitting energy. It is made from a thick and sturdy rubber material. It features grooves for improved traction and measures ½ x 95-1/2. A worn-down v-belt can lead to inefficient energy loss, and therefore poor performance. Installing this v-belt requires pliers and a wrench. First, the spark plug wire needs to be removed. Then, position the mower deck to the lowest possible level. Move the machine's blade engagement level to OFF. Remove the belt found from the engine pulley. Don't forget to take out the bow-tie pins and blade engagement cable as well. Remove the bolt from the pulley cover and loosen the nuts found at the idler pulley. Put the new belt and then tighten the nuts on the idler pulleys. The deck can now be re-assembled to its original position. This Husqvarna 532144959 V-Belt OEM Replacement can help keep a lawnmower in top condition. This genuine Husqvarna made V-belt is specifically for driving the blades on a lawnmower. It is compatible with Ariens, Craftsman, Poulan Pro, Dixon, and Husqvarna mowers. This V-belt is sold individually.

This genuine Husqvarna replacement part is a nose roller for use with lawn tractors and riding mowers. It is also known as a deck roller. A properly functioning nose roller is essential for the safe and reliable use of a lawn tractor or mower. The roller attaches to the mower deck and prevents the deck from touching the ground or damaging the lawn on uneven terrain. The nose roller may become worn out or damaged with extended use, necessitating replacement. Remember to check the nose roller periodically to spot any wear or damage. This part is an identical replacement for a nose roller that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This part is compatible with Craftsman, Husqvarna, and more lawn tractors and riding mowers. Please note: original part number 132264 is now obsolete, and manufacturer has replaced the original part number with this part.

A lock nut secures bolted joints with the creation of friction on the thread of the bolt. It prevents loosening of parts, which is a common occurence on lawn machines due to the tremendous amounts of vibration and wear, which can loosen connections between crucial components. This lock nut will prevent such issues. It will be necessary to have wrenches and other tools to make the repair or replacement. This OEM lock nut for Husqvarna and Craftsman fits garden machines that include tillers, lawnmowers, tractors, and other equipment. This durable part ships individually.