Mtd Gold Axle, Roller, Shaft, Wheel

This is a governor arm shaft found on lawnmowers, chippers, and other engines on lawn and garden equipment. It is a component of the governor assembly maintains a steady speed regardless of how much stress is placed on the engine. The governor arm is connected to the carburetor arm shaft. One end of this arm is connected to the governor spring and the other to the throttle linkage. Speed is increased or decreased based on the amount of push or pull that is placed on the throttle arm. If the governor arm shaft is bent, broken, or damaged, the governor arm will not be able to maintain its speed. The engine may appear to be stuck in high speed or it won't accelerate at all.Remove the carburetor to access the governor assembly. Disconnect the governor spring and take the linkage off the governor arm. Remove the governor arm from the arm shaft and then remove the broken governor arm shaft. Install the new shaft and reassemble the governor. Reinstall the carburetor. The governor arm shaft is made from heavy-duty metal and is sold as an individual unit. It is compatible with snowblowers, lawnmowers, chippers, and other small engines manufactured by MTD, Craftsman, Yard Machines, Troy-Bilt, Yard Man, Cub Cadet, and Husky.

This governor arm shaft can be used as a replacement part for hedge trimmers, string trimmers, lawnmowers, or chipper shredders. The governor arm shaft for one of these small engine appliances is a connecting part within the governor system; it is fastened to the governor cross shaft and is attached to the throttle linkage and the governor spring. Governor arm shafts can be subject to damage in the form of erosion, piercing, puncturing, or general wear and tear. Damage to a governor arm shaft can affect all of the surrounding components. As such, if a governor arm shaft suffers damage such that it cannot fasten components together, it must be removed and replaced immediately before the small engine appliance can be used again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This governor arm shaft is a genuine OEM part sourced from MTD. It is sold individually. It is compatible with the following brands: MTD, Cub Cadet, Craftsman, and Yard Machines.

To hold the wheels in place and keep them at the proper height, lawn mowers require front and rear axles. This axle is a Craftsman part that will be compatible with virtually all mowers that use Craftsman's specifications. While the axle is durable, it's also the case that the most common problem with lawn mowers is encountering obstacles and barriers while mowing. Not only are blades and flywheels damaged, but it is often the case that axles are bent or broken so the mower cannot be pushed or the wheels cannot be made level. In such cases, it's necessary to replace the damaged axle. Replacing the axle is a matter of removing the wheels with a socket wrench and a 9/16 socket and setting the mower on its side. Make sure to place the air filter on top rather than on the bottom. Use a flathead screwdriver to force back the retaining tabs and remove the axle. When installing the new axle, make certain that the adjustment bar is placed on the right side of the axle housing. Reverse the removal process to reassemble. This replacement axle is a certified OEM replacement part that exactly matches the specifications of the original. This axle is compatible with mowers offered by Yard Man, Yard Machines, Troy-Bilt, Craftsman, and MTD.