Mtd Gold Cap, Lid & Cover

This is a genuine MTD fuel cap replacement made for use on select snowblowers. It features a molded gasket for secure sealing and less risk of losing parts. The fuel cap is responsible for securing the fuel in the fuel tank during operation so that it doesn't spill out. There is an air hole in the cap to prevent pressurization of the fuel, ensuring safe operation at all times. This cap is made of plastic and it can become cracked or stripped with regular use. If it is damaged, the fuel will not be secure and the machine will not be safe to use. That will require an immediate replacement. This OEM fuel cap is made to exact standards by MTD and is compatible with several models of snow blowers and snow throwers. It is also capable of fitting select models from Yard Machines, Troy-Bilt, Cub Cadet, Yard-Man, and Husky. It features an easy plastic grip and a seal to prevent spillage. It can be installed with no tools and is sold as an individual unit. It is easy to screw the new cap into place, but be sure to thread the screw properly to prevent accidental stripping or misthreading that can cause the cap to get stuck.

This fuel cap assembly can be used to easily replace a worn-out or broken fuel cap.Fuel caps have one primary purpose, to keep fuel in the fuel tank and prevent it from spilling or becoming contaminated. This fuel cap is made of top-quality, durable plastic and includes a retainer that fixes to the neck of the tank itself to prevent the cap from becoming detached. Fuel caps are essential, as without them, the fuel in the outdoor equipment machine can easily become filled with dirt and debris that can contaminate the engine and cause more serious problems. This fuel cap assembly is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement fuel cap fits various different MTD, Cub Cadet, Craftsman, and Yards Man models of lawn mowers, log splitters, and trimmers. Please note this fuel cap assembly is sold individually.

A fuel cap assembly is a component often seen on lawnmowers and other lawn and garden equipment. It is made of durable black plastic and is used to ensure that fuel doesn’t spill out of the fuel tank. Over time, fuel cap assemblies can begin to wear out and cause problems. Sometimes this results in a cap that doesn’t tighten all the way or there may be a fuel smell when using a lawnmower or snowblower. If fuel is leaking, the cap doesn’t fit right, or the cap seems damaged, it’s best to replace it with a new component. This is a simple process that involves removing the original fuel cap assembly and fitting the new assembly to the lawn machine. This fuel cap assembly is a genuine OEM component that comes directly from the manufacturer. It is an individual part that is compatible with MTD, Murray, Cub Cadet, Bolens, Yard-Man, and Yard Machines lawnmowers, snowblowers, chipper shredders, and tillers. No tools are required to replace this component.

This fuel cap is a genuine Husqvarna part, sold individually. This fuel cap can be used as a replacement part for a lawn tractor. This fuel cap provides covering for the fuel tank and fuel line of the lawn tractor so that debris cannot enter through the fuel line and damage the engine.The fuel cap might have to be replaced at some point within the standard lifespan of the appliance if it cannot serve its function of protecting the engine from damage. This could occur if the fuel cap goes missing or if it is damaged in the form of punctures, tears, rips, scrapes, or erosion so that external materials can pass directly through the cap and into the fuel line. If this is the case, the component should be removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel cap is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Yard Man, and Craftsman.

Here is an OEM replacement fuel cap that can be used with a range of gas-powered lawn and garden machines. The fuel cap is used to protect the fuel tank from debris and dirt. It will also help to reduce air from getting into the fuel tank. If there is air or dirt in the fuel, it can make starting the vehicle more difficult or even impossible. Dirt in the fuel can also cause severe damage to the engine. A replacement cap is a simple fix to prevent these issues. Although fuel caps can last for years, there is always the chance that one could have been lost, damaged, or could suffer from too much wear and tear. The replacement cap can simply be screwed in place to replace the old cap. This is an authentic OEM replacement fuel cap that is sold individually. The cap can be used on many types of machines including tillers, log splitters, chippers, and other small engines. The fuel cap is compatible with many brands including Cub Cadet, MTD, Yard Machines, Yard-Man, and Troy-Bilt.

This part is a replacement push cap. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current push cap is broken or has been misplaced, this part can be used as a replacement. It is intended for use with several lawnmower models.The push cap is attached to the wheel hub cap and fits over the end of the axle shaft. This helps to protect the end of the shaft and the attached bolt that holds the wheel into position. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this push cap, the appropriate owner's manual and equipment diagrams should be referred to. This push cap is suitable for use on a variety of lawnmower models manufactured by MTD, Yard Machines, Craftsman, Yard Man, and Troy-Bilt. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

A valve cover is a small but important piece of hardware designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as a snow blower or a tiller. It is compatible with products by brands such as MTD, Yard Machines, Troy-Bilt, Yard Man, Cub Cadet, Bolens, and Husky.The valve cover part is crucial because it plays a big role in keeping the engine protected and healthy. The valve cover is a type of casing that can be found on the top of the machine's engine. It covers the valves of the engine, which in turn protects the machinery from the elements and prevents oil leaks. Over time, natural wear and tear with exposure to the elements will occur, leaving evidence on the valve cover in the form of cracks, corrosion, and misalignment of the valve cover. If the valve cover shows signs of wear such as these listed, it can make fluid leak into the engine compartments. If this happens, it is very serious and will ultimately lead to engine failure.The replacement or repair process of the valve cover should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.This valve cover is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually.

This air cleaner cover is designed to house the air filter on larger lawn equipment and other outdoor power tools. There is no aspect of small engine care more necessary than protecting the air that goes into the carburetor and cylinder from yard dust. Nothing is more incapacitating to a small engine than being clogged with dust, pollen, and other particulates that are invariably stirred up during landscaping work. While the air cleaner cover itself is not a moving part and would not seem to be subject to replacement, it is occasionally the case that, through extensive use or accidental contact, the cover becomes unable to shield the air filter within it. In these cases, it is essential to replace the cover with an OEM certified replacement cover that has been manufactured to the same specification as the original. Though replacing the cover itself is quite simple, it probably a very good idea to replace the air filters at the same time. If the cover is in need of replacement, it is quite likely the filters have been exposed to excessive amounts of particulate. This cover can be used on chippers, shredders, log splitter, mowers, and a variety of other small engine/large job equipment. Compatible brands include Troy-Bilt, MTD, Yard-Man, Yard Machines, and Cub Cadet.

This replacement part is a dust wheel. This is a genuine replacement part made by MTD. This part is used to help prevent wheels from becoming too dusty or dirty when not in use. A new dust wheel might be needed if the current on is missing or damaged. If the dust wheel is torn or unable to close properly, it might be time to replace it. This is a fairy simple repair as the user should be able to slip the dust wheel on over the current wheels. Be sure to purchase the correct amount as these are sold individually. Refer to the user manual for more instructions on how to replace this specific part. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit.