Mtd Pro Parts

This is a Briggs & Stratton Original Equipment 491588S Air Filter Cartridge. The purpose of this filter is to prevent dirt, dust, and debris from contaminating the carburetor and damaging the engine. This flat panel style, pleated paper air filter provides the first line of defense against the destructive effects of dirt ingestion. It is designed for 3.5 through 6.75 HP quantum engines and 625-1575 series engines. Over time, the air filter can get clogged or damaged, and this can lead to reduced engine performance. Locate the air filter cover, unscrew it, and remove the old filter. Make sure to clear out any debris that has found its way into the air filter assembly before inserting the new cartridge. Reattach the air filter cover and secure it with the screws. This replacement part works with generators, lawnmowers, pressure washers, wood chippers, and tillers. Aside from Briggs & Stratton, it is also compatible with specific products from Craftsman, Husqvarna, Lawn-Boy, Toro, Troy-Bilt, Simplicity, Snapper, and Wheel Horse. It is a genuine OEM replacement part and is sold individually.

Replacement pawl plate for lawn mowers. Secures the pawl mechanism in the starter assembly. Order a new plate if yours is cracked, broken, or missing.

Steering gear assembly for lawn tractors. Pivots wheels left and right when you turn the steering wheel. Replace if cracked, worn, or damaged.

Replace your snowblower's clutch handle assembly if the original is cracked, broken, or worn. This handle installs on the control panel for operator control.

Replacement 8-inch wheel assembly for self-propelled walk-behind mowers. Installs on rear or front axle. Needed when original wheel is cracked or worn.

Front wheel assembly for walk-behind mowers. Installs on the front axle to support and guide the mower. Replace if cracked, worn, or broken.

Replacement tire and rim assembly for lawn mowers and snowblowers. Installs as a complete wheel unit. Replace if tire is worn, cracked, or rim is bent.

Front right axle assembly for lawn tractors. Mounts to the front of your riding mower. Replace if bent, damaged, or broken from impact or wear.

Hex washer head screw for lawn equipment. Secures components and panels. Replace if stripped, missing, or corroded for proper assembly and fit.

This carriage bolt is a self-locking fastener made for use in round or square holes to attach metal to metal in outdoor equipment. These bolts provide an added safety feature because they can only be removed from one side. Carriage bolts can carry a large amount of weight, which makes them ideal for use in outdoor yard equipment. Carriage bolts may be used to attach a lawn mower's arm to the side support and other similar applications. If the bolt needs to be replaced, removal and installation are simple. Use a wrench to loosen the nut holding the washer and bolt in place. Once the nut is loose, the bolt can be unthreaded by hand and pulled out of the hole. To install, push the bolt back through the hole. If the fit is too tight to install by hand, use a hammer to tap it in place. Reinstall the washer and nut and tighten with a wrench.This carriage bolt is designed for use in lawnmowers, snowblowers, and lawn tractors manufactured by Craftsman, Bolens, Yard Machines, Yard-Man, and MTD. This is a genuine OEM product that comes directly from the manufacturer. Note: It does not come with a nut or washer.

Carriage bolt fastener for lawn and garden equipment. Replaces worn, stripped, or missing bolts that secure deck components and attachments.

Carriage bolt for snowblower attachments and snow throwers. Secures components and panels. Replace if bolt is stripped, rusted, or missing.

Replacement screw for outdoor power equipment including lawn tractors, tillers, leaf blowers, and trimmers. Replace stripped, missing, or damaged screws.

This is a self-tapping screw. It attaches to various lawn machines' engines. The exact location depends on the make and model of the device. With age or misuse of the lawn equipment, the self-tapping screw may become damaged or break. One sign that the screw is gone or broken is a loose connection between the engine and the foundation that it sets on. Excessive vibration is another indicator that the self-tapping screw is missing or damaged. If it does wear out and get lost or damaged, the part must be replaced.It is easy to replace a self-tapping screw. First, make sure that the device is cooled. Wear gloves for protection. It requires a wrench to install. If the self-tapping screw breaks, other tools such as pliers may be needed to get the screw out.The self-tapping screw is a genuine OEM part supplied by the manufacturer. It is made of durable metal. The self-tapping screw is sold individually. It is compatible with machines produced by Troy-Bilt, Bolens, Yard-Man, Yard Machines, Cub Cadet, and Husky. It is used in a variety of lawn tractors, lawnmowers, and other lawn equipment engines.

Flange bolt for lawn equipment and outdoor power tools. Secures engine components and assemblies. Replace if bolt is stripped, missing, or damaged.

Replacement screw for lawn tractors and outdoor power equipment. Secures components in place. Install a new screw if current one is damaged or missing.