Mtd Pro Parts

Hex bolt secures blade adapter and other components on lawn mowers. Replace if bolt is stripped, damaged, or missing to properly fasten parts.

Replacement fuel tank assembly for gas trimmers and handheld outdoor equipment. Installs to house fuel safely. Replace if cracked, leaking, or damaged.

Hinged mulch plug assembly for walk-behind lawn mowers. Replaces worn or broken mulch covers. Includes metal hinge. Installs in place of discharge chute.

This is a genuine replacement bolt that is designed specifically for use on select lawn tractors. This tractor bolt is a specialty piece of hardware designed for use on the steering segment gear. This screw holds the gear in place and is exposed to constant vibrations and repetitive motion as a result. Over time, that can result in damage, wear, or even total breakage of the bolt and require a replacement. If the bolt isn't functional or is missing, the steering segment gear will not be secured and that can lead to further damage if left unattended. Using a genuine replacement part like this will guarantee an exact fit for compatible models. This genuine OEM gear bolt is manufactured by MTD. It is compatible with lawn and garden equipment from RYOBI, HUSKEE, Troy-Bilt, Bolens, Yard Machines, Yard Man, and Cub Cadet, along with select models from MTD. The bolt works for more than 100 compatible models. It is made of durable metal and sold as an individual unit. A wrench or socket will be required to replace this part. Always wear gloves when performing repairs on lawn and garden equipment and allow the engine to cool before doing any work.

Replacement fuel tank assembly for tillers, edgers, and trimmers. Includes attached fuel line. Replace your cracked, leaking, or damaged tank reservoir.

Replace a worn shave plate if snow isn't being gathered properly or the auger housing scrapes pavement. This scraper bar protects your snowblower base.

Metal blade support spacer that mounts between the mower blade and bolt. Secures the blade to the deck base. Replace if worn, damaged, or missing.

Carburetor assembly for small engine edgers, tillers, and trimmers. Mixes air and fuel for proper engine operation. Replace if cracked or leaking.

This clutch assembly engages and disengages the drive system on a tiller, allowing the tines to spin when the clutch lever is activated. It transfers power from the engine to the tine shaft. Replace this assembly if the tines won't engage, slip during operation, or if the clutch lever no longer controls tine rotation properly.

Replacement oil drain plug for outdoor power equipment engines. Installs in the oil pan to seal the drain opening. Replace if stripped, cracked, or leaking.

This is a small-diameter fuel return line that connects to the engine's fuel system, routing excess fuel back from the carburetor or fuel delivery components. It ensures proper fuel circulation and pressure regulation in the engine. Replace this line if it is cracked, dry-rotted, leaking fuel, or causing hard starting and fuel smell around the engine.

The fuel line assembly with filter is the complete line that carries fuel from the tank to the engine carburetor, with an inline filter attached to catch debris and contaminants before they reach engine components. Keeping the fuel clean protects the carburetor and ensures consistent fuel delivery. Replace this assembly if the engine is hard to start, runs roughly, stalls frequently, if you notice fuel leaks, or if the filter is visibly clogged or deteriorated.

Fastener pin that secures nuts and bolts in lawn mower engines and assemblies. Replace if bent, missing, or damaged during maintenance or repair work.

This grease fitting attaches to the cast pivot bar on many types of garden and lawn equipment. It is made of durable metal and ensures that internal parts of the equipment are lubricated so they operate at their full potential. Sometimes a grease fitting can become worn damaged and need to be replaced.If a lawn tool no longer seems to be properly lubricated, the grease fitting could be the cause. A pair of pliers will be required to make the replacement. Clean the area near the grease fitting and then use a hex wrench to remove it from the machine. Take the new fitting and place it into the hole and tighten it before applying grease.This is a genuine OEM replacement grease fitting that is sourced directly from the manufacturer. The part is sold individually. The fitting is compatible with chipper shredders, lawn tractors, snowblowers, string trimmers, edgers, chainsaws, and lawnmowers manufactured by Yard-Man, Cub Cadet, Troy-Bilt, Craftsman, Ryobi, Murray, Broan, Yard Machines, Huskee, Montgomery Wards, Bolens, MasterCut, and MTD.

Auger bearing for snow throwers supports rotating shaft movement. Replace if you hear grinding noise or auger doesn't spin smoothly. Verify fit with model.

21.23-inch mulching blade for 42-inch deck lawn tractors. Replace when blade edge is worn, bent, or cracked. Features 6-point star center hole.