Mtd Pro Trimmer

Clutch won't engage or burning smell from your tiller? This clutch assembly connects engine power to the tines. Moderate DIY repair for tillers.

Secures the lower handle clip on line trimmers and lawn equipment. Replace if broken, stripped, or missing to properly mount the handle assembly.

Inner spool reel for gas line trimmers. Holds and feeds trimmer line during operation. Replace if cracked, worn, or damaged to restore proper line feeding.

This is the clutch drum that houses the clutch that engages the power tools on more than 50 gasoline-powered lawn and landscape devices. The clutch sits inside this housing, which enables it to rotate. When the RPMs of the engine reach a certain point, the clutch expands and causes the drive shaft of the tool to engage. Among the different kinds of equipment that use this clutch housing are cultivators, edgers, and grass trimmers. The clutch, and therefore the clutch drum, receive a great deal of wear for several reasons: the vibration of the engine, the rapid up and down change of engine revolutions, and resistance met by the tools that are transferred back to the clutch and housing. Signs that the clutch is failing include a slow response to increased engine RPMs and an inability for the power tool to engage the drive shaft. In these cases, the clutch and housing should be replaced in order for the equipment to operate properly again. When choosing a clutch housing, it is important to select one that, like this one, is a genuine OEM certified part. This housing is compatible with Craftsman, Troy-Bilt, MTD, Bolens, Yard-Man, and Ryobi equipment.

Bump knob assembly for gas line trimmers. Installs on the cutting head to control line feed. Replace if cracked, broken, or worn from impact damage.

Fastener screw for tillers and lawn equipment. Secures components together for stable operation. Replace if stripped, missing, or damaged during maintenance.

Few parts fulfill as many roles on lawn mowers and other landscaping power tools than the cover screw. This screw serves to attach metal housing parts, assemblies, and shrouds to one another on equipment such as power vacuums, snow blowers, edgers, tillers, hedge trimmers, lawn tractors, leaf blowers, grass trimmers and cultivators. As these are extremely durable metal screws, they seldom fail under ordinary use. It should be noted, however, that they are most often used at connection and pressure points. Stresses at these junctions sometime loosen screws, causing them to be lost or occasionally resulting in stripped threads. It's also occasionally the case that these screws are lost during repair or routine maintenance of yard equipment because of their small size. Users should make sure to consult their owner's manuals for replacement steps and any special instructions. Because of their small size and the ease of losing them during repair work or maintenance, it's recommended to keep a supply of appropriately sized screws on hand. Most importantly, when replacing a part make sure to use a genuine OEM replacement part. They are manufactured according to the specs of the original parts and are perfect replicas.

Spring retainer for line trimmers. Secures internal springs in place during operation. Replace if cracked, broken, or missing to restore proper assembly.

Line won't feed or trimmer line keeps breaking? This reel assembly holds and feeds cutting line properly. Common DIY replacement for worn or damaged reels.

Bump feed knob controls string line advancement on your trimmer. Replace when threading wears out or knob won't engage properly. Verify fit with your model.

Replacement bolt for line trimmers and snow throwers. Secures internal components and housing. Order when original is stripped, missing, or damaged.

This blade assembly is a genuine MTD part. It is also called a line cutter. It is used on handheld trimmers. The part includes two screws, two nuts, and the blade itself.The blade attaches to the shield and cuts the trimmer line while in use. It is normal for the blade to become dull and worn over time. The blade can be sharpened, but in many cases it is simpler, more effective, and safer to replace the blade instead.This blade is a genuine OEM part directly sourced from the manufacturer and is sold individually (includes the blade, screws, and nuts). It is made for compatibility with machines made by Bolens, Craftsman, Cub Cadet, McCulloch, MTD Pro, Ryobi, Troy-Bilt, Yard Machines, and Yard-Man.

Rotating trimmer head for gas line trimmers and weed wackers. Replace when cracked, worn, or no longer spinning properly during operation.

Replacement screw for lawn tractors, tillers, and trimmers. Used throughout various assemblies. Replace if lost, stripped, or damaged during repairs.

This part is a replacement blade driver. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken blade driver in line trimmers.Blade drivers help to ensure the line trimmer blade rotates on the gearbox shaft and so is an essential component and should be replaced if faulty. This part may become corroded, worn, jammed, or otherwise damaged over time, requiring replacement. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular blade driver, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This blade driver can be used with a variety of line trimmer models manufactured by Craftsman, MTD, Troy-Bilt, and other brands.