Mtd String Trimmer Cap, Lid & Cover

This genuine air cleaner cover assembly protects the air filter cleaner on select string trimmers from the elements and exposure to potential debris and damage. This allows the filter to work properly and avoid serious clogs or damage in the meantime. The cover consists of a durable plastic housing, but it can become cracked or damaged over time or due to an incident. In the event that the air cover is broken, it should be replaced right away to prevent further damage or cause issues with the air filter. This genuine OEM air cleaner cover is manufactured by MTD to exact standards. It offers compatibility with several string trimmers from MTD, as well as those from Yard Man, Bolens, Yard Machines, Troy-Bilt, and Cub Cadet. This kit includes the plastic air filter cover, the plastic insulator, and two metal bolts that attach the cover to the air filter base assembly on the engine. It is recommended to replace the air cleaner gasket at the same time, which will require a separate purchase. Always allow the engine to cool and wear gloves when doing any engine work.

This fuel cap assembly fits on the lawn tractor fuel tank to keep the fuel inside and debris outside. The part is red and has a gas pump embossed on it for added identification. The top of the cap also features vent slots to allow hot air to escape and prevent heat expansion. It features a gasket under the cap to keep gas from sloshing out during operation. The fuel cap assembly is made of heavy-duty plastic that can fade and crack due to the elements. Removal and replacement are as simple as taking the old cap off and putting the new cap on. Hand-tighten to prevent gas from leaking. Never over-fill the fuel tank. Leave room for the oil additive if it is not mixed before fueling. This fuel cap assembly is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual unit. This fuel cap is designed for use in lawnmowers and lawn tractors manufactured by MTD, Ryobi, Troy-Bilt, Bolens, Yard-Man Yard Machines, Cub Cadet, and Murray.

This replacement fuel cap is used with many types of gas-powered lawn and garden tools. The purpose of the fuel cap is to help keep dirt and debris out of the fuel tank. It also helps to reduce extra air from getting into the tank.Debris or air in the fuel tank can make it difficult to start a gas-powered machine. Dirt can cause damage to the engine, as well. The replacement fuel cap is a simple way to ensure these types of issues do not occur. Most fuel caps can last for many years without needing a replacement. However, over time, they could become damaged or worn out from too much use. The old cap can be removed and the new cap can be screwed onto the fuel tank to replace it. No tools are needed.The fuel cap can be used with trimmers and blowers from a range of manufacturers including Yard Machine, Cub Cadet, MTD, Craftsman, Murray, Remington, and Troy-Bilt. This is a genuine OEM part sourced from the manufacturer, and it is sold individually.

This is a fuel cap. It keeps fuel from leaking or spilling, and slows fuel evaporation when a machine is sitting for long periods. The fuel lid can be cracked or otherwise damaged, or it can become lost when removed for refilling. For the safety of the operator, a missing or broken fuel cap should be replaced immediately.Replacing a fuel cap is simple. If there is an existing cap, remove it first by turning it counterclockwise. Install the new fuel cap by matching up the unit's threads and twisting it clockwise until secure. Wear gloves when working with fuel caps.This fuel cap is a genuine OEM part. It is made of high-quality, durable materials. The cap is sold as an individual piece. The fuel cap can be used with MTD, Cub Cadet, and Troy-Bilt machines. It is compatible with blowers, cultivators, edgers, trimmers, and other lawn and garden equipment.

Blade guards are essential for protection from flying debris that may be kicked up or disturbed by the edger blade. They prevent debris such as small stones from being kicked up while the equipment is in use and are an important safety feature. Operating an edger without a blade guard can be dangerous. This edger blade guard can be used to easily replace worn out or broken blade guards.This edger blade guard is a genuine OEM part that has been sourced directly from the manufacturer. This replacement edger blade guard can be used on multiple different edger models including Troy-Bilt, Craftsman, and Husky. Please note that this part is sold individually.

This is a genuine OEM replacement air filter and housing designed for select outdoor trimmers. The air filter and housing are important to keeping the engine clean. The filter helps to keep debris and dirt from getting into the engine while the filter housing protects it from excess debris or impact damage. Together, they ensure that the engine only gets clean, filtered air for optimal performance. Over time, the filter will become clogged and checking and replacing it should be part of routine maintenance. It is a good idea to inspect the cover assembly when replacing air filters or doing other maintenance to identify potential repairs or issues that need attention. Be sure to wear gloves when performing this repair. Replacing the filter is easy, but there are some instances where the entire unit needs replaced. This genuine OEM part can provide the perfect fit for select trimmers from Craftsman and MTD. It is sold as a complete assembly with the filter and housing. No hardware is included. There are no tools required to install this part.

MTD air cleaner cover assemblies are located outside of air cleaners found in MTD gas string trimmers. The cover is used to secure the air filter in place. It also is used to protect the internal parts from debris, including the carburetor. The air cleaner cover may need replacing after damage in situations such as the trimmers being dropped. The original cover could also become lost after routine use and therefore ineffective at keeping out dirt, dust, and other particles. These conditions require a replacement to continue the proper protection of the air cleaner and subsequently the engine.Locate the air cleaner cover by determining where the air filter is on the MTD lawn trimming machine. Make sure the tool is cool. Wear gloves for safety. Remove the two screws holding on the existing air cleaner cover if there is one in place. Remove the air cleaner and install the new part.The genuine OEM air cleaner cover assembly replacement part is supplied directly from the manufacturer. It is compatible with several different MTD lawn trimming machines. The air cleaner cover is black and includes two screws. The part is made from high-quality plastic. The air cleaner cover assembly is sold individually.

This is a head cap that is typically used with a variety of. The head cap is tasked with protecting the line fitting and housing to prevent wear and tear that can be caused if the string trimmer makes contact with the ground. Since the head cap may make contact with the ground or other items, it can become damaged or broken. If these things occur, or the head cap has been lost, it will need to be replaced. If it is not, the line fitting and housing could be damaged and prevent the string trimmer from functioning properly.No tools are required to replace the head cap but work gloves are useful for the process. The original head cap screws on and off so it can be removed easily. After the old component has been taken off, the new head cap can be installed in its place. Before making the repair, the string trimmer should be powered off and the spark plug wire should be disconnected.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as a single component. The head cap is made to be used with string trimmers manufactured by Craftsman and MTD.

This genuine MTD belt cover can be used as a replacement part for lawn and garden appliances that are operated by small engines, such as lawn tractors, snowblowers, chipper shredders, leaf blowers, edgers, and lawnmowers. The purpose of a belt cover is to protect the gears, the belt, and the engine and its components from accumulating dirt and debris internally, which can cause individual components to malfunction and fall into disrepair.A belt cover will have to be replaced in the event that it can no longer protect the gears, the belt, and the engine. A belt cover can suffer from damage as a result of overuse or direct collision; this form of damage can limit the ability of the belt cover to perform its precautionary function. Remember that gloves must always be worn when handling, repairing, and operating outdoor equipment. This OEM belt cover part is compatible with the following brands: MTD, Craftsman, Cub Cadet, and Yard Machines. This part is sold individually.