Mtd Cap, Lid & Cover

Deck belt cover for riding mowers with 42-inch decks. Shields the belt assembly from debris and damage. Replace if cracked, broken, or missing.

This is a genuine MTD fuel cap replacement made for use on select snowblowers. It features a molded gasket for secure sealing and less risk of losing parts. The fuel cap is responsible for securing the fuel in the fuel tank during operation so that it doesn't spill out. There is an air hole in the cap to prevent pressurization of the fuel, ensuring safe operation at all times. This cap is made of plastic and it can become cracked or stripped with regular use. If it is damaged, the fuel will not be secure and the machine will not be safe to use. That will require an immediate replacement. This OEM fuel cap is made to exact standards by MTD and is compatible with several models of snow blowers and snow throwers. It is also capable of fitting select models from Yard Machines, Troy-Bilt, Cub Cadet, Yard-Man, and Husky. It features an easy plastic grip and a seal to prevent spillage. It can be installed with no tools and is sold as an individual unit. It is easy to screw the new cap into place, but be sure to thread the screw properly to prevent accidental stripping or misthreading that can cause the cap to get stuck.

Black plastic wheel hub cap for lawn tractors and riding mowers. Replaces cracked, broken, or missing hub caps. Snaps onto wheel hub for a finished look.

This is a genuine OEM replacement air filter and housing designed for select outdoor trimmers. The air filter and housing are important to keeping the engine clean. The filter helps to keep debris and dirt from getting into the engine while the filter housing protects it from excess debris or impact damage. Together, they ensure that the engine only gets clean, filtered air for optimal performance. Over time, the filter will become clogged and checking and replacing it should be part of routine maintenance. It is a good idea to inspect the cover assembly when replacing air filters or doing other maintenance to identify potential repairs or issues that need attention. Be sure to wear gloves when performing this repair. Replacing the filter is easy, but there are some instances where the entire unit needs replaced. This genuine OEM part can provide the perfect fit for select trimmers from Craftsman and MTD. It is sold as a complete assembly with the filter and housing. No hardware is included. There are no tools required to install this part.

Replacement fuel cap assembly for tillers and outdoor power equipment. Seals fuel tank, prevents debris entry, and features vent slots. Needed when original cap is cracked, broken, or gasket is worn.

This air cleaner cover is designed to house the air filter on larger lawn equipment and other outdoor power tools. There is no aspect of small engine care more necessary than protecting the air that goes into the carburetor and cylinder from yard dust. Nothing is more incapacitating to a small engine than being clogged with dust, pollen, and other particulates that are invariably stirred up during landscaping work. While the air cleaner cover itself is not a moving part and would not seem to be subject to replacement, it is occasionally the case that, through extensive use or accidental contact, the cover becomes unable to shield the air filter within it. In these cases, it is essential to replace the cover with an OEM certified replacement cover that has been manufactured to the same specification as the original. Though replacing the cover itself is quite simple, it probably a very good idea to replace the air filters at the same time. If the cover is in need of replacement, it is quite likely the filters have been exposed to excessive amounts of particulate. This cover can be used on chippers, shredders, log splitter, mowers, and a variety of other small engine/large job equipment. Compatible brands include Troy-Bilt, MTD, Yard-Man, Yard Machines, and Cub Cadet.

Protective belt cover for snow thrower engines. Shields belt assembly from snow and debris. Replace if cracked, broken, or missing to protect components.

Replacement nozzle door for chipper shredders. Attaches to discharge opening to protect users from debris and rotating blades. Order if cracked or missing.

Secures the air filter and protects internal engine components from debris. Replace if cracked, broken, or damaged to maintain proper filtration coverage.

Protects the line fitting and housing on your trimmer head. Replace this cap if it's cracked, broken, or missing from ground contact or impact damage.

Covers and protects the wheel hub on chipper shredders and outdoor equipment. Replace if cracked, missing, or damaged to restore appearance and prevent debris entry.

Protective dust cover that mounts over the mower wheel assembly. Replace if cracked, broken, or missing to keep debris out of the drive wheels.

Protective hub cap for walk-behind lawn mower wheels. Shields the wheel hub from dirt, debris, and moisture. Replace if cracked, broken, or missing.

This is a replacement log splitter fender directly from the manufacturer. The fender protects and covers the wheel to help prevent any object from disrupting the wheel's motion or damaging the wheel itself. Fenders can crack and break from regular use. If any heavy object falls onto the fender, the wheel will be kept safe. However, if fender is cracked, it will need to be replaced to avoid wheel damage. Fenders can be replaced relatively easily. Depending on the model, the wheel may need to be removed. Jack up the log splitter to remove the wheel. The fender is held in place by three bolts which a socket wrench can remove. Once the wheel is off, remove the old fender and replace it with the new one using the same bolts. If the bolts are in rough shape, consider replacing them. Replace the wheel and lower the jack to complete the repair. The fender is a genuine OEM replacement part and is designed to be used with MTD, Troy-Bilt, and Yard Machines brand log splitters.

Replacement fuel cap for gas trimmers and handheld lawn tools. Seals the fuel tank to keep dirt and debris out. Replace if cracked, missing, or worn.

Replacement fuel cap for lawn tractors, trimmers, blowers, and tillers. Prevents fuel leaks and evaporation. Replace if cracked, broken, or missing.