Need Help?
Call or text
Show parts
This part is discontinued by the manufacturer and is no longer available for purchase.
This is a Hitachi cylinder compatible with grass trimmers and brush cutters. The cylinder is a vital engine part. It is a chamber where fuel is combusted and power is generated.Cylinders are most often damaged by overheating. Equipment with a damaged cylinder likely will not run at all, but if it does work, the user may notice excessive vibration, leaks, or smoke while it's running. When installing this part, be sure to set the lawn equipment on a stable surface. Wear gloves and allow it to cool completely before beginning repairs.This is a genuine OEM part compatible with lawn and garden equipment manufactured by Hitachi. No additional hardware is included with this product.
This part is a replacement carburetor insulator. This is a genuine OEM part made by Hitachi and has been sourced directly from the manufacturer. This part can be used to replace a faulty or broken carburetor insulator in a variety of outdoor power equipment. This carburetor insulator is installed to ensure there is proper spacing in between the cylinder and the carburetor. It may need to be replaced if it becomes cracked or otherwise damaged because of regular equipment use. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this carburetor insulator, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this carburetor insulator is suitable for use on several different models of trimmers, brush cutters, leaf blowers, and lawnmowers manufactured by Hitachi and Tanaka. This is a genuine part made of high-quality, durable materials and is sold individually.
This pump diaphragm is used to replace the carburetor's seal when doing scheduled maintenance or making necessary repairs. Proper sealing of the carburetor is essential to efficient engine performance. Many performance issues, including misfiring and overheating, can be attributed to a worn pump diaphragm. Replacing the pump diaphragm when engine issues are first noticed can prolong the life of the engine. Before rebuilding or replacing the entire carburetor due to misfiring or overheating, pull the diaphragm and inspect it for wear. If there are tears or warps, replace the diaphragm. It is an inexpensive repair that may solve the problem. Before starting, empty the fuel tank into a clean vessel. Drain the carburetor and fuel lines. Take the spark plug out as a safety precaution. After the old diaphragm is removed, clean the area to remove any accumulated dirt and debris. If the area is cleaned thoroughly, the new diaphragm will not require lubricant. Install the new diaphragm and reinstall the machine parts. This genuine OEM pump diaphragm is sourced directly from the manufacturer and sold as an individual unit. It is specially designed for blowers, chain saws, drills, hedge trimmers, drills, and saws manufactured by Tanaka and Hitachi.
This is an OEM air assembly designed for use in outdoor lawn and garden equipment. The high-quality plastic houses the air filter that prevents contaminants from getting in the carburetor. Regular use of machinery results in normal wear on the air assembly. Scheduled maintenance and inspections will indicate when it is time to replace the entire assembly and not just the air filter. A clean air filter is important in extending the life of the carburetor and the performance of the engine. Dirt, debris, oil, and other contaminants can clog the carburetor. If the air filter is dirty, the carburetor won't get enough air. If the air filter is missing or clogged it can cause engine failure. A clogged air filter can also cause decrease power and increase fuel consumption. If any of these problems are noted, the air assembly should be inspected and replaced. If the engine won't start or runs rough, the carburetor may need to be cleaned. To clean the carburetor, remove it from the engine. A screwdriver is needed to remove and replace the air assembly. This is an individually sold air assembly. It is specially designed for trimmers, brush cutters, and leaf blowers manufactured by Tanaka and Hitachi.
This part is a line trimmer lever that is used on trimmers and brush cutters. The line trimmer lever is part of the handle assembly. It connects the throttle wire assembly to the handle assembly. When this lever is utilized, it actuates the wire and controls the motor's output.Replacing the lever may be required due to the normal wear and tear of the product over time. If the lever experiences forceful impact with another object, its plastic portion could crack and break. If the lever will not stay attached to the handle assembly, it may need to be replaced.The line trimmer lever is made to be used on trimmers and brushcutters that are manufactured by the Hitachi, Metabo, and Tanaka brands. This part is an OEM part sourced directly from the manufacturer and it is sold individually.
This part is a replacement fuel tank. This is a genuine OEM part made by Hitachi and has been sourced directly from the manufacturer. If the current tank is broken, punctured, or defective in any way, this part can be used as a top-quality replacement. It is intended for use with several different types of string trimmer models.This tank is specifically responsible for holding the fuel that is used to power the trimmer. Tanks can become cracked or punctured over time, which can easily cause fuel to leak. This is both dangerous and expensive, so the tank should be replaced if it is defective. Access to proper tools is required to install this part. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to start any repairs. For more accurate information on how and where to install this fuel tank, the appropriate owner's manual and equipment diagrams should be referenced. This fuel tank is suitable for use on a variety of string trimmer models manufactured by Hitachi and Tanaka. It is a genuine OEM part and thus is made of high-quality, durable plastic. This part is sold individually. The cap and other conjoining parts are not included.
A fuel line or fuel pipe grommet is placed between the fuel line and the tank. Its primary purpose is to seal the two components together, preventing unwanted leaks. This durable fuel pipe grommet is made from a thick rubber material. However, it may eventually experience cracks and tears, which are signs that the grommet should immediately be replaced. One of the most noticeable symptoms is that there is an unexplained fuel leak on the tank. Replacing a fuel pipe return grommet is fast and easy. Start by letting the engine cool down and draining the fuel tank. Otherwise, fuel leak can occur since the tank is slightly pressurized. Then, open the air cleaner cover and remove the air filter. Get a sturdy wire and curve one of its ends like a hook. Insert the hook and take the fuel line out from the tank. Grab the fuel line and remove its fuel filter. Make sure to remove the clip. Then remove the fuel lines that go through the grommet. Take a small screwdriver to pull the grommet out of the tank. Insert the replacement into the tank and reassemble the other parts to their original positions. Hitachi makes this fuel pipe grommet. It is compatible with Tanaka and Hitachi grass trimmers. It will also work with other machines like chainsaws, hedge trimmers, and drills. This fuel pipe is an original Hitachi replacement. It is sold individually.
This instruction kit provides the printed and/or packaged installation and user information you need to set up, operate, and maintain your appliance correctly. Clear documentation helps prevent installation mistakes and supports safe operation. What it does:
Usually ships within 4 - 14 days
This replacement part is a safety cover. This part is used as a cover so that the machine can operate properly. This part protects the pieces inside the machine from becoming damaged during use. It also protects the user from the parts within the appliance as they can be dangerous. A new safety cover might be needed if the current one is damaged in any way. This can be from normal wear and tear after years of use or from a singular incident that may have caused damage of some kind. This can include being dented, cracked, or bent in any way. This is a genuine replacement part made by Hitachi. It is an OEM replacement part which will ensure a proper fit. This part is sold individually.
This replacement part is a return spring. Return springs are able to produce torque, which can aid in many different types of actions within a machine.A new return spring might be needed if the current one has become too loose or is unable to hold any pressure. If the spring has been put under too much pressure, it may snap. Be sure to wear work gloves are worn to prevent injury during the repair or replacement process. This is a genuine replacement part made by Hitachi. It is an OEM replacement part which will ensure a proper fit. This part is sold individually.
The nylon trimmer cutting head is a replacement compatible with a range of grass trimmers. The trimmer head attaches to the bottom of the trimmer and spins rapidly when the machine is in use. The nylon that extends from the trimmer head cuts the grass.When the trimmer head no longer has enough nylon to cut properly, it will need to be replaced. It will also need to be replaced if it is cracked or otherwise damaged during use. Replacing the trimmer head is simple and requires no tools. When the mounting nut is left-hand-threaded, users will turn the old trimmer head clockwise to loosen and will tighten the new head by turning counterclockwise. On curved shaft models where the mounting nut is right-hand-threaded, counterclockwise loosens and clockwise tightens.The nylon trimmer cutting head is a replacement part for trimmers from Hitachi and Tanaka. The part includes the entire trimmer head assembly including the bump head knob, spool with string, cover, spring, and metal eyelets. The cutting head is sold individually. This is a genuine OEM part sourced from the manufacturer.