Parts for Lg WT7005CW/00: Outer Case Assy Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This damper controls airflow into the refrigerator compartment to maintain even temperatures and proper cooling. Replaces a worn or stuck damper to help restore correct air distribution and reduce temperature swings. What it does:

• Opens and closes the air inlet to regulate cold air from the freezer into the fridge compartment
• Helps maintain even temperatures and prevents sections from becoming too warm or too cold
• Commonly replaced when damper is stuck, noisy, or not responding and fridge temperatures fluctuate
• Works with the fridge's control system to modulate airflow as needed

• One damper assembly

• Disconnect power before beginning any repair to avoid electrical shock
• Access typically requires removing interior panels or trim in the refrigerator compartment; keep fasteners organized
• Verify actuator orientation and proper linkage engagement before reassembly

A replacement holder assembly that secures and supports internal components for proper alignment and operation. Restores stable mounting where the original bracket is cracked, bent, or broken so the appliance runs quietly and reliably. What it does

• Provides a secure mounting point for internal parts that rely on a fixed support
• Prevents rubbing, misalignment, and excess vibration caused by a damaged holder
• Helps restore correct component positioning to improve part interaction and operation
• Commonly used when the original bracket is cracked, worn, or no longer holds parts firmly

• One holder assembly

• Disconnect power before starting any repair; shut off water supply if the repair requires opening plumbing
• Basic hand tools typically required; handle clips and tabs gently to avoid damage
• Inspect adjacent components for wear and replace if needed for a long-lasting repair

The Agitator is an OEM part for LG washers. It serves a critical cleaning function by scrubbing clothes during the wash cycle through a gentle oscillating motion. The agitator's quality construction, using durable materials, allows it to withstand years of washing loads without degrading its effective scrubbing abilities. 

Causes of a bad agitator can include damage or cracks from large or off-balance loads, corrosion from mineral buildup in hard water areas, or general wear from extended heavy use.

Symptoms of a bad agitator include:

• Ineffective or inadequate cleaning even on light soil loads  
• Excessive vibrations or noise coming from the agitator area
• Visible wear like cracking, bending, or rusting of agitator parts

Replacing a damaged agitator restores the washer's scrubbing performance. This OEM LG part ensures clothes are properly cleansed using the machine's intended washing motion. 

This OEM LG part is also compatible with Kenmore models. 

The Customized Screw is an OEM part for securing the wash plate in LG washing machines. This screw maintains the wash plate's position and stability during the washer's operation. The Customized Screw ensures the wash plate performs efficiently, contributing to the effectiveness of the washing process by enabling proper agitation and circulation of clothes.

Causes of a bad Customized Screw can include wear and tear over time, especially from the constant motion and stress during the wash cycles.  

Symptoms of a bad Customized Screw include:

• The wash plate becoming loose or detached
• Ineffective washing due to improper motion of the wash plate
• Unusual noises during the wash cycle indicating a loose component

This OEM LG part is also compatible with some Kenmore models.

This replacement holder is a small mounting bracket used to secure components inside the appliance, restoring proper alignment and support so parts sit firmly and operate as intended. Ideal when a cracked or worn holder causes instability. What it does

• Secures internal components or assemblies to prevent movement or vibration
• Restores proper alignment when a damaged holder allows parts to sag or shift
• Helps reduce noise from loose or unsecured components
• Commonly replaced when the original holder is cracked, broken, or missing

• Turn off and unplug the appliance before beginning any repair.
• Inspect surrounding clips and fasteners; replace any damaged hardware for a secure fit.
• Use appropriate hand tools; avoid forcing parts to prevent further breakage.

This replacement nut secures bolts or studs in your appliance. Replacing a missing or stripped nut restores a tight, reliable connection to keep brackets and assemblies stable and reduce vibration or rattling. What it does:

• Provides threaded retention for bolts/studs on panels, brackets, and assemblies
• Helps maintain alignment and stability during operation
• Typical failure signs: stripped threads, missing hardware, loose or rattling components, vibration
• Direct replacement for the original nut in the same location

• 1 nut

• Disconnect power before service; shut off the water supply
• Match thread size/pitch to the original; start threads by hand to avoid cross-threading
• Tighten with the correct tool; do not overtighten or damage mating parts
• Reinstall any washers/spacers in the original order and verify secure fit

This genuine hardware washer installs at the specific joint shown in your model's parts diagram. It spreads clamp force and keeps the connection aligned and secure to support smooth operation of the related component. What it does:

• Distributes fastener load and protects mating surfaces from damage
• Maintains proper spacing and alignment within the assembly
• Helps resist loosening from vibration over time
• Clues it may be needed or worn: loose/rattling parts, unusual vibration or noise, or visible wear at the fastener location; on some models, seepage at that joint

• 1 washer

• Disconnect power and turn off water supply before servicing
• Support the assembly, remove the fastener, and install the washer in the same orientation
• Tighten the fastener snugly without overtightening; replace any damaged bolts, nuts, or seals

Replacement control knob that restores smooth, reliable rotary control for front-panel selector shafts. Provides a positive grip and clear pointer for accurate selection so you can set temperatures, cycles, or power levels with confidence. What it does:

• Replaces a cracked, worn, broken or missing control knob so the selector turns and stays on the chosen setting
• Restores tactile grip and a visible pointer for precise adjustments
• Helps stop slipping, loose fit, or wobble felt when turning the control
• Works with the matching splined control shaft—does not modify electrical components

• Disconnect power to the appliance before replacing the knob to prevent accidental operation
• Pull the old knob straight off the control shaft; match the knob's spline/profile to the shaft and push the new knob fully onto the shaft until seated
• If the control shaft or retaining clip is damaged, replace the damaged component before installing the knob

The Main PCB Assembly is an OEM part for LG washing machines. As the central control board, it manages and monitors critical washing machine functions such as cycles, temperatures, and spin speeds. The main PCB assembly contains the electronic components and circuitry necessary to operate programs and ensure safety.

Causes of a bad main PCB can include water damage, electrical faults or shorts over time.

Symptoms of a bad main PCB include:

• The washer not turning on or not responding to controls
• Inability to progress through cycles
• Fault codes displayed
• Programs not working properly

This OEM LG part is also compatible with some Kenmore models.

The Drain Pump Assembly is an OEM part compatible with LG dishwashers. It is responsible for pumping water out of the dishwasher during the drain cycle. Located at the bottom of the tub, the drain pump works continuously throughout the cycle to remove dirty water and debris.

Symptoms of a bad drain pump assembly include:

• Incomplete or slow draining of water at the end of cycles
• Standing water or flooding at the bottom of the dishwasher tub  
• Loud vibrating or grinding noises coming from the drain pump area
• Poor cleaning performance due to inadequate water removal

Causes of a bad drain pump can be a failed motor, a clogged impeller preventing free spinning, or worn-out seals.

This OEM LG replacement part is also compatible with Sears/Kenmore.

This drain hose assembly routes wastewater away from the appliance to the household drain, helping stop leaks and restore proper draining. It's a direct-fit replacement when the existing hose is cracked, clogged, or leaking. What it does:

• Channels wash/rinse water from the appliance to the household drain
• Prevents leaks caused by cracked, split, or brittle hose sections
• Helps restore proper drain flow when a damaged hose causes slow or no draining
• Works with the appliance's pump to safely discharge wastewater

• One drain hose assembly

• Always unplug the appliance and turn off water supply before starting work
• Remove the old hose, route the new hose without kinks, and secure with clamps or retaining clips
• Inspect hose connections and test a short cycle to ensure there are no leaks

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This is a factory replacement parts assembly designed to restore proper fit and function of a specific component group in your appliance. Use it to replace a worn, damaged, or missing original assembly and maintain reliable operation. What it does:

• Provides a complete, preassembled component group specified by the manufacturer
• Restores proper alignment, support, and operation of the associated parts
• Helps resolve issues like looseness, rattling, misalignment, or intermittent function
• Direct-fit replacement engineered to match the original design

• One parts assembly

• Disconnect power (and shut off water or gas, if applicable) before servicing
• Refer to your model's service documentation for the exact location and procedure
• Handle sharp edges and components carefully; wear cut-resistant gloves
• Verify correct operation before final reassembly

This guide cover is a molded trim piece that shields and supports its mating guide/track, helping the assembly align and operate smoothly while protecting internal components from debris and damage.

• Protects the guide/track from wear and debris intrusion
• Helps maintain smooth alignment and operation of the moving assembly
• Can help resolve issues like rubbing, misalignment, or a loose/missing trim piece
• Restores a clean, finished look after damage or loss

• Unplug power and shut off water before servicing
• Compare the new cover to the original to confirm orientation
• Snap or screw into place per the unit's service manual; do not force
• Verify smooth travel and clearance after installation

The Lid Switch Assembly is an OEM component specifically designed for LG washers. This assembly includes the lid switch, which plays an important safety role by detecting when the washer lid is properly closed and locked. 

The lid switch assembly monitors the position of the washer lid and communicates with the control board to prevent operation if the lid is detected as open. It ensures the wash cycle only functions when the lid is securely shut, minimizing safety hazards.

Symptoms of a bad lid switch include:

• The washer fails to detect when the lid is closed
• Inability to select or start a cycle 
• Error codes related to the lid being open

Replacing the lid switch with this genuine OEM LG part can restore proper safety functions to your washer. This replacement part is also compatible with Sears/Kenmore models.

The Bellows Assembly is an OEM part for LG washers. The bellows assembly forms a watertight seal around the pump shaft to make sure water is properly drained from the washer tub during the spin cycle.

Causes of a bad drain pump bellows assembly can include split or cracked rubber from age, leaks that develop over time due to small cracks or porous areas of the bellows.

Symptoms of a bad drain pump bellows assembly include:

• Water not fully draining from the washer tub after cycles
• Excess water left in the tub requiring additional emptying
• Drips or leaks under the washer during or after draining
• Standing water or mold growth inside the pump housing

This LG part is also compatible with some Kenmore models.

The Detergent Box Assembly is an OEM part for LG washing machines. This part holds and dispenses detergent, fabric softener, and bleach at the appropriate times during the wash cycle, ensuring effective cleaning and care for your laundry.

Common causes of a bad detergent box include clogging or blockage from detergent residue, wear and tear from regular use, or damage to the dispenser mechanisms.

Symptoms of a bad Detergent Box Assembly include:

• Detergent, fabric softener, or bleach not dispensing properly
• Residue build-up in the detergent drawer
• Leaks or drips from the detergent box area
• Error codes related to detergent dispensing

This OEM LG part is also compatible with some Kenmore models.

The Softener Cap is an OEM part for LG washing machines. It serves as the lid and housing for the internal water softener that prevents mineral deposits from building up. The softener cap funnels water to and from the softener compartment during various stages of the wash cycle.

Causes of a faulty softener cap can include cracked or degraded seals over extended usage, impact damage distorting fit, or harsh cleaners affecting plastics over time.

Symptoms of a bad softener cap include:

• Water leaks from around the softener area  
• The cap not closing or sealing properly 
• Mineral buildup occurring prematurely
• The softener not functioning as intended

This genuine LG replacement is compatible with Sears/Kenmore machines.

This softener cap seals and directs fabric softener from the dispenser so it dispenses correctly during the wash cycle. Replacing a worn or cracked cap helps prevent leaks and ensures the softener flows into the drum at the right time. What it does:

• Seals the fabric softener reservoir to prevent drips and leaks during filling and storage
• Guides softener into the rinse cycle so the appliance dispenses at the proper time
• Replaces cracked, warped, or missing caps that cause leaking or improper dispensing
• Restores a secure fit between the dispenser assembly and the softener reservoir

• One softener cap

• Unplug the appliance or disconnect power before servicing
• Remove the dispenser drawer or housing to access the cap
• Press or snap the cap into place until fully seated; do not force or overtighten
• Inspect dispenser for residue or damage and clean before reinstalling

The Clutch and Housing Assembly is an OEM component specifically designed for LG washing machines. This assembly includes the clutch, pulley, and outer housing that allows for spin cycles. 

The clutch and housing assembly works by connecting and disconnecting the motor's spinning power to the inner tub during wash and spin cycles. Over time, belt-driven components wear from repeated use.

Causes of a bad clutch and housing assembly can include belt slippage from old or damaged belts, worn gear teeth, or an accumulated buildup of residue affecting proper engagement.

Symptoms of a bad clutch and housing assembly include:

• Inability to initiate or complete spin cycles  
• Loud grinding noises from damaged gears or bearings
• Vibrations from an improperly engaging clutch mechanism

This OEM LG part is also compatible with some Sears/Kenmore models. Replacing with a new assembly restores the spin function and reduces future belt and component wear.
 

The Washer Inlet Valve Assembly is an OEM part for LG washing machines. It is a component that controls the flow of water into the washer during cycles. The valve regulates water pressure and flow to ensure proper amounts of water are introduced at the appropriate times. 

Symptoms of a bad inlet valve include:  

• Insufficient or incomplete water fill during wash cycles  
• No water fill at all 
• Leaks or water spills from the valve area
• Loud noises coming from the valve

This valve plays an important role in the wash performance. Failure to properly regulate water can result in poor cleaning, leaks, or water damage. 

This OEM LG part is also compatible with Sears/Kenmore.

The Hose Connector is an OEM part for LG washing machines. It controls the water flow during the wash and rinse cycles. This part is designed to facilitate a secure and leak-proof connection between different sections of the washing machine, such as the inlet valve and the tub, or the pump and the drain hose. Ensuring these connections are secure is vital for the efficient operation of the washing machine, preventing leaks and maintaining optimal water usage.

Causes of failure may involve cracks, splitting, or collapsed seals/gaskets, as well as excessive mineral or foreign deposits that can obstruct water flow.

Symptoms of a bad hose connector are:

• Slow or incomplete filling during wash cycles
• Water leaks at the supply valve or connector area
• Connector split, cracked or compromised fittings

This genuine LG replacement is also compatible with Kenmore washing machines.

Detergent housing assembly that holds and routes detergent to the washer dispenser, helping ensure proper detergent flow and reducing leaks or dispenser jams. Fits into the dispenser area to replace cracked, warped, or damaged housing components. What it does:

• Houses and channels liquid or powdered detergent into the dispenser and wash chamber
• Restores proper detergent release when the original housing is cracked, broken, or warped
• Helps stop leaks and detergent buildup around the dispenser area
• Works with the dispenser drawer and related seals to maintain correct flow

• Disconnect power and turn off the water supply before starting service
• Use basic hand tools and follow the washer service manual or OEM diagram for disassembly/reassembly
• Inspect and replace any worn seals or gaskets at reassembly to prevent leaks

The Water Level Pressure Switch is an OEM replacement part for LG washing machines. It is an essential component that monitors and detects the water level within the washing machine tub during the wash cycle.

Symptoms of a bad water level pressure switch:

• Washing machine not filling with water or not stopping when the desired water level is reached
• Excessive water intake, leading to overfilling and potential leaks
• Error codes or indicators related to water level issues
• Washing machine not advancing to the next cycle due to incorrect water level detection

Causes of a bad water level pressure switch can include mechanical failure, electrical malfunctions, or blockages or debris preventing accurate water level readings.

This OEM LG part is also compatible with Sears/Kenmore washing machine models.

This combined rotor assembly is the rotating motor component that helps drive the appliance's main drum/motor system, restoring proper rotation and reducing humming or no-spin failures. Designed to match OEM fit and function. What it does:

• Replaces the motor rotor so the motor can create the magnetic field and turn the drum or agitator
• Helps stop symptoms like the washer not spinning, slow or labored rotation, or unusual motor humming
• Works with the motor stator and related mounting parts to restore smooth, balanced operation
• Supports normal load rotation and torque for standard wash cycles

• One combined rotor assembly

• Disconnect power and water before beginning repair; follow all safety precautions
• Motor weight and alignment may require two-person handling or support during removal/installation
• Reuse existing hardware only if undamaged; inspect stator, bearings, and seals while accessible
• If error codes persist after replacement, verify motor control and related wiring connections

The Water Level Pressure Switch is an OEM replacement part for LG washing machines. It is an essential component that monitors and detects the water level within the washing machine tub during the wash cycle.

Symptoms of a bad water level pressure switch:

• Washing machine not filling with water or not stopping when the desired water level is reached
• Excessive water intake, leading to overfilling and potential leaks
• Error codes or indicators related to water level issues
• Washing machine not advancing to the next cycle due to incorrect water level detection

Causes of a bad water level pressure switch can include mechanical failure, electrical malfunctions, or blockages or debris preventing accurate water level readings.

This OEM LG part is also compatible with Sears/Kenmore washing machine models.

A standard replacement bolt used to secure appliance panels and internal assemblies. This OEM-style fastener restores proper fit and reduces movement that can cause noise or misalignment in appliance components. What it does:

• Fastens panels, brackets, and components to maintain structural integrity
• Keeps moving parts aligned to help prevent rattling or vibration
• Replaces missing, loose, or corroded bolts that compromise fit
• Suitable where a standard machine/sheet-metal bolt is required

• One bolt

• Disconnect power and water before servicing the appliance
• Use the correct driver/socket to avoid stripping the head or threads
• Tighten securely but avoid over-torquing; replace any damaged nuts or washers
• Inspect mating threads and clean or chase threads if corroded

The Motor Assembly is an OEM part for LG washing machines. This motor assembly is responsible for driving the rotation of the drum during the wash and spin cycles. It provides the necessary power and torque to ensure smooth and efficient operation, allowing your clothes to be thoroughly cleaned.

Symptoms of a bad motor assembly include:

• Drum not spinning or rotating properly
• Unusual noises during operation
• Error codes related to the motor

A bad motor assembly can occur due to electrical issues, mechanical failure, or other internal malfunctions. If you notice symptoms such as the drum not spinning or rotating properly, unusual noises coming from the washer during operation, or error codes related to the motor, it may be time to replace the motor assembly.

This LG replacement part is also compatible with select Kenmore models.
 

This multi wiring harness routes power and control signals between the appliance control and multiple components, restoring proper electrical connections and reliable operation. Use when damaged wiring or connectors cause intermittent or no function. What it does:

• Links the main control board to sensors, switches, motors or other components via pre-terminated connectors
• Replaces frayed, burnt or broken wires that can cause intermittent operation or component failure
• Helps restore lost power or signal to affected circuits
• Prevents arcing and poor connections caused by damaged terminals

• One multi wiring harness as shown

• Disconnect power (unplug or shut off breaker) before starting any repair
• Label or photograph connector locations to ensure correct reassembly
• Inspect mating connectors and terminals for damage; replace if corroded or melted
• Route and secure the harness away from heat sources and moving parts; avoid pinching or sharp edges

This is a common nut used to secure appliance components and fasteners, restoring a tight connection for safer, quieter operation. Replaces a worn or missing nut to help stop loose panels, rattling, or shifting parts. What it does:

• Secures brackets, panels, or fasteners to keep components properly mounted
• Restores clamping force to prevent vibration-related noise
• Helps stop loose or wobbly parts that can lead to component wear
• Small hardware replacement for routine repairs and reassembly

• Disconnect power and water before starting any repair
• Use the correct socket or wrench size to avoid rounding the nut
• Thread onto matching bolt stud; tighten until snug—do not overtighten
• If threads are damaged, replace both nut and mating fastener

This is a small flat hardware washer used with fasteners to distribute load and prevent loosening on appliance assemblies. It helps keep screws and bolts seated for a secure, stable connection. What it does

• Sits under a screw or bolt head to spread pressure and protect the mating surface
• Helps prevent fasteners from pulling through soft or thin materials
• Reduces loosening from vibration when paired with the correct screw or bolt
• Can eliminate play or rattling where a missing washer allowed movement

• One flat washer as pictured

• Disconnect power before servicing the appliance and follow manufacturer safety instructions
• Replace only with the same style and size washer for proper fit and function
• Hand tools are normally sufficient; ensure fasteners are tightened to the OEM recommendation
• If multiple washers are missing or damaged, inspect surrounding hardware for wear

This Cover Cap is a small trim piece that restores a finished appearance and protects underlying hardware on the appliance. It snaps into place to hide fasteners and prevent dirt buildup for a cleaner look. What it does:

• Covers and protects exposed screws, clips, or openings on the appliance cabinet or control area
• Restores a finished, factory appearance after repair or panel replacement
• Helps keep debris and moisture away from fasteners and internal edges
• Reduces the chance of snagging or accidental contact with sharp panel edges

• Disconnect power to the appliance before starting any work
• Typically installs by snapping into the panel opening or over the fastener; may require gentle prying with a trim tool
• Replace the cap to maintain proper fit and protection of the surrounding trim
• Compare the old part to this cap before installation

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.