Parts for Lg WT7005CW/03: Outer Case Assy Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

A replacement holder assembly that secures and supports internal components for proper alignment and operation. Restores stable mounting where the original bracket is cracked, bent, or broken so the appliance runs quietly and reliably. What it does

• Provides a secure mounting point for internal parts that rely on a fixed support
• Prevents rubbing, misalignment, and excess vibration caused by a damaged holder
• Helps restore correct component positioning to improve part interaction and operation
• Commonly used when the original bracket is cracked, worn, or no longer holds parts firmly

• One holder assembly

• Disconnect power before starting any repair; shut off water supply if the repair requires opening plumbing
• Basic hand tools typically required; handle clips and tabs gently to avoid damage
• Inspect adjacent components for wear and replace if needed for a long-lasting repair

The Agitator is an OEM part for LG washers. It serves a critical cleaning function by scrubbing clothes during the wash cycle through a gentle oscillating motion. The agitator's quality construction, using durable materials, allows it to withstand years of washing loads without degrading its effective scrubbing abilities. 

Causes of a bad agitator can include damage or cracks from large or off-balance loads, corrosion from mineral buildup in hard water areas, or general wear from extended heavy use.

Symptoms of a bad agitator include:

• Ineffective or inadequate cleaning even on light soil loads  
• Excessive vibrations or noise coming from the agitator area
• Visible wear like cracking, bending, or rusting of agitator parts

Replacing a damaged agitator restores the washer's scrubbing performance. This OEM LG part ensures clothes are properly cleansed using the machine's intended washing motion. 

This OEM LG part is also compatible with Kenmore models. 

The Customized Screw is an OEM part for securing the wash plate in LG washing machines. This screw maintains the wash plate's position and stability during the washer's operation. The Customized Screw ensures the wash plate performs efficiently, contributing to the effectiveness of the washing process by enabling proper agitation and circulation of clothes.

Causes of a bad Customized Screw can include wear and tear over time, especially from the constant motion and stress during the wash cycles.  

Symptoms of a bad Customized Screw include:

• The wash plate becoming loose or detached
• Ineffective washing due to improper motion of the wash plate
• Unusual noises during the wash cycle indicating a loose component

This OEM LG part is also compatible with some Kenmore models.

This damper controls airflow between compartments to help maintain consistent temperatures and efficient cooling. It replaces a worn or failed damper to restore proper air distribution and reduce temperature swings. What it does:

• Regulates airflow between freezer and fresh-food compartments for balanced temperatures
• Can cause uneven cooling or warm fresh-food compartment when faulty
• May click, stick, or fail to open/close if broken or obstructed
• Works with the refrigerator's control system to adjust airflow based on settings

• Disconnect power before beginning any service to avoid electric shock
• Handle the damper and housing carefully to avoid damage to plastic fins or linkage
• Note orientation and actuator connection before removal to ensure correct reassembly
• Test operation after reinstalling by restoring power and cycling temperature controls

This replacement holder is a small mounting bracket used to secure components inside the appliance, restoring proper alignment and support so parts sit firmly and operate as intended. Ideal when a cracked or worn holder causes instability. What it does

• Secures internal components or assemblies to prevent movement or vibration
• Restores proper alignment when a damaged holder allows parts to sag or shift
• Helps reduce noise from loose or unsecured components
• Commonly replaced when the original holder is cracked, broken, or missing

• Turn off and unplug the appliance before beginning any repair.
• Inspect surrounding clips and fasteners; replace any damaged hardware for a secure fit.
• Use appropriate hand tools; avoid forcing parts to prevent further breakage.

This replacement nut secures bolts or studs in your appliance. Replacing a missing or stripped nut restores a tight, reliable connection to keep brackets and assemblies stable and reduce vibration or rattling. What it does:

• Provides threaded retention for bolts/studs on panels, brackets, and assemblies
• Helps maintain alignment and stability during operation
• Typical failure signs: stripped threads, missing hardware, loose or rattling components, vibration
• Direct replacement for the original nut in the same location

• 1 nut

• Disconnect power before service; shut off the water supply
• Match thread size/pitch to the original; start threads by hand to avoid cross-threading
• Tighten with the correct tool; do not overtighten or damage mating parts
• Reinstall any washers/spacers in the original order and verify secure fit

This genuine hardware washer installs at the specific joint shown in your model's parts diagram. It spreads clamp force and keeps the connection aligned and secure to support smooth operation of the related component. What it does:

• Distributes fastener load and protects mating surfaces from damage
• Maintains proper spacing and alignment within the assembly
• Helps resist loosening from vibration over time
• Clues it may be needed or worn: loose/rattling parts, unusual vibration or noise, or visible wear at the fastener location; on some models, seepage at that joint

• 1 washer

• Disconnect power and turn off water supply before servicing
• Support the assembly, remove the fastener, and install the washer in the same orientation
• Tighten the fastener snugly without overtightening; replace any damaged bolts, nuts, or seals

Replacement control knob that restores smooth, reliable rotary control for front-panel selector shafts. Provides a positive grip and clear pointer for accurate selection so you can set temperatures, cycles, or power levels with confidence. What it does:

• Replaces a cracked, worn, broken or missing control knob so the selector turns and stays on the chosen setting
• Restores tactile grip and a visible pointer for precise adjustments
• Helps stop slipping, loose fit, or wobble felt when turning the control
• Works with the matching splined control shaft—does not modify electrical components

• Disconnect power to the appliance before replacing the knob to prevent accidental operation
• Pull the old knob straight off the control shaft; match the knob's spline/profile to the shaft and push the new knob fully onto the shaft until seated
• If the control shaft or retaining clip is damaged, replace the damaged component before installing the knob

The Drain Pump Assembly is an OEM part compatible with LG dishwashers. It is responsible for pumping water out of the dishwasher during the drain cycle. Located at the bottom of the tub, the drain pump works continuously throughout the cycle to remove dirty water and debris.

Symptoms of a bad drain pump assembly include:

• Incomplete or slow draining of water at the end of cycles
• Standing water or flooding at the bottom of the dishwasher tub  
• Loud vibrating or grinding noises coming from the drain pump area
• Poor cleaning performance due to inadequate water removal

Causes of a bad drain pump can be a failed motor, a clogged impeller preventing free spinning, or worn-out seals.

This OEM LG replacement part is also compatible with Sears/Kenmore.

This single wire harness connects electrical components to restore a secure signal and power path. Replacing a damaged harness helps stop intermittent operation and restores reliable function to the affected circuit. What it does:

• Provides a factory-style electrical connection between components
• Replaces damaged, frayed, or corroded wires that cause intermittent operation
• Helps resolve symptoms like no power to a circuit, control not responding, or sporadic operation
• Maintains proper routing and connector fit to reduce arcing and poor contact

• Disconnect power before servicing to avoid shock or damage
• Inspect connectors and mating terminals for damage before installation
• Route harness away from heat sources and moving parts; secure with existing clips

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This top cover is the OEM-style cabinet top panel that restores the washer's finished appearance and protects internal components from debris and moisture. It fits over the appliance cabinet to replace a damaged or worn top. What it does:

• Covers and protects the washer cabinet, shielding controls and internal components from dust and spills
• Replaces dented, cracked or rusted top panels to improve appearance
• Helps prevent debris and moisture from entering the cabinet area
• Restores a secure mounting surface for control housings and trim

• Disconnect power and water supply before beginning work
• Remove screws or fasteners securing the existing top, then lift the panel straight off the cabinet
• Handle edges carefully; panel and cabinet edges can be sharp
• Verify fasteners and clips are secure when reinstalling

This is a factory replacement parts assembly designed to restore proper fit and function of a specific component group in your appliance. Use it to replace a worn, damaged, or missing original assembly and maintain reliable operation. What it does:

• Provides a complete, preassembled component group specified by the manufacturer
• Restores proper alignment, support, and operation of the associated parts
• Helps resolve issues like looseness, rattling, misalignment, or intermittent function
• Direct-fit replacement engineered to match the original design

• One parts assembly

• Disconnect power (and shut off water or gas, if applicable) before servicing
• Refer to your model's service documentation for the exact location and procedure
• Handle sharp edges and components carefully; wear cut-resistant gloves
• Verify correct operation before final reassembly

This guide cover is a molded trim piece that shields and supports its mating guide/track, helping the assembly align and operate smoothly while protecting internal components from debris and damage.

• Protects the guide/track from wear and debris intrusion
• Helps maintain smooth alignment and operation of the moving assembly
• Can help resolve issues like rubbing, misalignment, or a loose/missing trim piece
• Restores a clean, finished look after damage or loss

• Unplug power and shut off water before servicing
• Compare the new cover to the original to confirm orientation
• Snap or screw into place per the unit's service manual; do not force
• Verify smooth travel and clearance after installation

The Lid Switch Assembly is an OEM component specifically designed for LG washers. This assembly includes the lid switch, which plays an important safety role by detecting when the washer lid is properly closed and locked. 

The lid switch assembly monitors the position of the washer lid and communicates with the control board to prevent operation if the lid is detected as open. It ensures the wash cycle only functions when the lid is securely shut, minimizing safety hazards.

Symptoms of a bad lid switch include:

• The washer fails to detect when the lid is closed
• Inability to select or start a cycle 
• Error codes related to the lid being open

Replacing the lid switch with this genuine OEM LG part can restore proper safety functions to your washer. This replacement part is also compatible with Sears/Kenmore models.

The Bellows Assembly is an OEM part for LG washers. The bellows assembly forms a watertight seal around the pump shaft to make sure water is properly drained from the washer tub during the spin cycle.

Causes of a bad drain pump bellows assembly can include split or cracked rubber from age, leaks that develop over time due to small cracks or porous areas of the bellows.

Symptoms of a bad drain pump bellows assembly include:

• Water not fully draining from the washer tub after cycles
• Excess water left in the tub requiring additional emptying
• Drips or leaks under the washer during or after draining
• Standing water or mold growth inside the pump housing

This LG part is also compatible with some Kenmore models.

This bracket assembly secures internal components to the appliance frame, restoring proper alignment and structural support for panels or shelves. Replacing a damaged bracket helps stop rattling, sagging, or misaligned parts for safer operation. What it does:

• Provides a stable mounting point to hold panels, shelves, or other internal parts in place
• Restores proper fit and alignment to reduce noise, vibration, and rubbing
• Prevents further wear by re-securing loose or sagging components
• Works with factory fasteners to maintain original structural support

• One bracket assembly as shown

• Before replacing, unplug the appliance or switch off power at the breaker to avoid electrical hazard
• Use appropriate hand tools; verify bracket orientation against removed part before tightening
• Keep all original screws and clips; only secure to factory mounting points
• If corrosion or additional damage is present, inspect adjacent parts and replace as needed

This bracket assembly secures and supports internal appliance components, restoring proper alignment and stability to parts that have shifted or come loose. It provides a direct replacement to maintain safe, reliable operation. What it does:

• Provides a sturdy mounting point to keep panels, modules, or assemblies properly positioned
• Helps eliminate rattling, misalignment, or loose component movement
• Restores intended structural support after impact or wear
• Works as a direct-fit replacement to return original fit and function

• One bracket assembly

• Disconnect power (and water, if applicable) before beginning any repair
• Use appropriate tools and keep fasteners for a secure fit; replace damaged screws as needed
• Inspect surrounding components and wiring for damage before reassembly

The Detergent Box Assembly is an OEM part for LG washing machines. This part holds and dispenses detergent, fabric softener, and bleach at the appropriate times during the wash cycle, ensuring effective cleaning and care for your laundry.

Common causes of a bad detergent box include clogging or blockage from detergent residue, wear and tear from regular use, or damage to the dispenser mechanisms.

Symptoms of a bad Detergent Box Assembly include:

• Detergent, fabric softener, or bleach not dispensing properly
• Residue build-up in the detergent drawer
• Leaks or drips from the detergent box area
• Error codes related to detergent dispensing

This OEM LG part is also compatible with some Kenmore models.

The Clutch and Housing Assembly is an OEM component specifically designed for LG washing machines. This assembly includes the clutch, pulley, and outer housing that allows for spin cycles. 

The clutch and housing assembly works by connecting and disconnecting the motor's spinning power to the inner tub during wash and spin cycles. Over time, belt-driven components wear from repeated use.

Causes of a bad clutch and housing assembly can include belt slippage from old or damaged belts, worn gear teeth, or an accumulated buildup of residue affecting proper engagement.

Symptoms of a bad clutch and housing assembly include:

• Inability to initiate or complete spin cycles  
• Loud grinding noises from damaged gears or bearings
• Vibrations from an improperly engaging clutch mechanism

This OEM LG part is also compatible with some Sears/Kenmore models. Replacing with a new assembly restores the spin function and reduces future belt and component wear.
 

The Washer Inlet Valve Assembly is an OEM part for LG washing machines. It is a component that controls the flow of water into the washer during cycles. The valve regulates water pressure and flow to ensure proper amounts of water are introduced at the appropriate times. 

Symptoms of a bad inlet valve include:  

• Insufficient or incomplete water fill during wash cycles  
• No water fill at all 
• Leaks or water spills from the valve area
• Loud noises coming from the valve

This valve plays an important role in the wash performance. Failure to properly regulate water can result in poor cleaning, leaks, or water damage. 

This OEM LG part is also compatible with Sears/Kenmore.

The Stator Assembly is an OEM part for LG top load washing machines. As an electrical component, it is responsible for powering the motor that spins the washing drum. The stator contains electromagnetic coils that generate a rotating magnetic field to drive the inner rotor and suspension assembly when energized. 

Symptoms of a bad stator assembly include: 

• The washing machine fails to agitate clothes properly  
• Unusual noises emanating from the motor area
• The drum spins slowly or fails to spin during cycles
• Drive issues arise such as not completing cycles 

Causes can be a failure of coil windings over time, moisture ingress causing electrical shorts or faulty electronic speed/voltage regulation.

This LG replacement part is suitable for Kenmore top-load models as well.

The Water Level Pressure Switch is an OEM replacement part for LG washing machines. It is an essential component that monitors and detects the water level within the washing machine tub during the wash cycle.

Symptoms of a bad water level pressure switch:

• Washing machine not filling with water or not stopping when the desired water level is reached
• Excessive water intake, leading to overfilling and potential leaks
• Error codes or indicators related to water level issues
• Washing machine not advancing to the next cycle due to incorrect water level detection

Causes of a bad water level pressure switch can include mechanical failure, electrical malfunctions, or blockages or debris preventing accurate water level readings.

This OEM LG part is also compatible with Sears/Kenmore washing machine models.

The Water Level Pressure Switch is an OEM replacement part for LG washing machines. It is an essential component that monitors and detects the water level within the washing machine tub during the wash cycle.

Symptoms of a bad water level pressure switch:

• Washing machine not filling with water or not stopping when the desired water level is reached
• Excessive water intake, leading to overfilling and potential leaks
• Error codes or indicators related to water level issues
• Washing machine not advancing to the next cycle due to incorrect water level detection

Causes of a bad water level pressure switch can include mechanical failure, electrical malfunctions, or blockages or debris preventing accurate water level readings.

This OEM LG part is also compatible with Sears/Kenmore washing machine models.

The Motor Stator Bolt is an OEM part for LG washing machines. This bolt secures the stator to the motor, ensuring the stability and proper functioning of the washing machine's motor assembly.

Causes of a bad motor stator bolt can include wear and tear over time, improper installation, or damage from over-tightening or impact. A compromised bolt can lead to instability in the motor, potentially affecting the washer's performance.

Symptoms of a bad motor stator bolt include:

• Unusual noises during the wash cycle
• Vibrations or shaking of the washer
• The motor not functioning properly or failing to start

This OEM LG part is also compatible with Sears/Kenmore.

This power cord assembly supplies the appliance's main AC power connection, restoring safe and reliable electrical feed when the original cord is damaged or fails. It fits the factory inlet and mates to the appliance control. What it does:

• Replaces a frayed, cut, burned or broken power cord to restore electrical connection
• Provides the appliance's primary AC power path from the wall outlet
• Helps stop intermittent power loss or no-power symptoms caused by a damaged cord
• Reinstalls with existing terminal connections and strain-relief hardware

• Always disconnect power at the breaker or unplug the appliance before starting work.
• Tighten terminal screws securely to the original torque and confirm wiring orientation matches factory connections.

The Motor Assembly is an OEM part for LG washing machines. This motor assembly is responsible for driving the rotation of the drum during the wash and spin cycles. It provides the necessary power and torque to ensure smooth and efficient operation, allowing your clothes to be thoroughly cleaned.

Symptoms of a bad motor assembly include:

• Drum not spinning or rotating properly
• Unusual noises during operation
• Error codes related to the motor

A bad motor assembly can occur due to electrical issues, mechanical failure, or other internal malfunctions. If you notice symptoms such as the drum not spinning or rotating properly, unusual noises coming from the washer during operation, or error codes related to the motor, it may be time to replace the motor assembly.

This LG replacement part is also compatible with select Kenmore models.
 

This replacement parts assembly restores a damaged or worn component assembly to return the appliance to normal operation. It replaces the original assembly so you can avoid intermittent operation or failures caused by broken or loose internal parts. What it does

• Replaces a factory assembly that integrates multiple internal components and mounts
• Restores secure mechanical fit and alignment of the replaced section
• Helps resolve symptoms such as intermittent operation, rattling, or failure of the affected area
• Useful when individual components are damaged, corroded, or worn and a single assembly swap is required

• Recommended for users comfortable with basic disassembly; unplug or disconnect power before starting
• Follow OEM service manual procedures and torque specs when reinstalling; secure all connectors and fasteners
• Inspect adjacent wiring and connectors during install; replace any damaged wiring or connectors separately

The HARNESS, MULTI is an OEM component designed specifically for LG washing machines. As an integrated wiring bundle, it facilitates communication between various washing machine functions simultaneously for coordinated cycles. Smooth signal transmission across motors, controls, and sensors through this custom harness is crucial for optimized cleaning.

Causes of a bad multi-function harness may include pinched or chafed insulation from repeated door openings. Constant vibration could also cause wire fractures or loose connections over extended use. 

Symptoms of a bad multi-function harness include:

• Individual components like agitators or pumps failing to respond  
• Incomplete or ineffective wash cycles from lack of coordination
• Strange noises or behaviors as systems experience disruption
• Inability to control settings or fill/drain water properly

Replace yours today with this genuine LG wiring solution. Smooth, multi-faceted communication restores thorough, gentle washing performance. Compatible with Sears/Kenmore units as well.

This is a common nut used to secure appliance components and fasteners, restoring a tight connection for safer, quieter operation. Replaces a worn or missing nut to help stop loose panels, rattling, or shifting parts. What it does:

• Secures brackets, panels, or fasteners to keep components properly mounted
• Restores clamping force to prevent vibration-related noise
• Helps stop loose or wobbly parts that can lead to component wear
• Small hardware replacement for routine repairs and reassembly

• Disconnect power and water before starting any repair
• Use the correct socket or wrench size to avoid rounding the nut
• Thread onto matching bolt stud; tighten until snug—do not overtighten
• If threads are damaged, replace both nut and mating fastener

This is a small flat hardware washer used with fasteners to distribute load and prevent loosening on appliance assemblies. It helps keep screws and bolts seated for a secure, stable connection. What it does

• Sits under a screw or bolt head to spread pressure and protect the mating surface
• Helps prevent fasteners from pulling through soft or thin materials
• Reduces loosening from vibration when paired with the correct screw or bolt
• Can eliminate play or rattling where a missing washer allowed movement

• One flat washer as pictured

• Disconnect power before servicing the appliance and follow manufacturer safety instructions
• Replace only with the same style and size washer for proper fit and function
• Hand tools are normally sufficient; ensure fasteners are tightened to the OEM recommendation
• If multiple washers are missing or damaged, inspect surrounding hardware for wear

This cover cap is a small trim piece that snaps into place to protect and conceal fasteners and internal components, restoring the appliance's finished appearance. It prevents dirt entry and helps keep surrounding parts secure. What it does:

• Covers exposed screws and openings to improve cosmetics
• Protects underlying components from dust and debris
• Helps keep trim and panels aligned when installed
• Commonly replaced when cracked, broken, or missing

• One cover cap

• Disconnect power (and water if applicable) before servicing the appliance
• Typically installs by snapping into position; lightweight trim may require a small flat screwdriver to remove old piece
• Inspect surrounding clips/tabs for damage and replace if worn to ensure a secure fit
• Handle plastic parts gently to avoid cracking during install

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.