Parts for Maytag JMW3430WP01: 01 - Oven Parts

The wall oven door gasket creates a seal around the oven door to prevent heat from escaping during cooking. Replace when you notice heat escaping from the door edges, visible tears in the seal, or uneven cooking temperatures.

Replace your oven light bulb when it burns out or dims to restore interior visibility while cooking. Verify compatibility with your model number.

Oven won't heat or stops heating during cleaning cycle? The high-limit safety switch cuts power when temperatures exceed safe limits. Moderate DIY fix.

Oven light not working or dim? This light lens cover shields the bulb from grease and heat, restoring clear illumination. Quick snap-in replacement.

Side trim panel for wall oven and microwave combo units. Covers the side edge of the appliance for a finished look. Order a replacement if damaged or missing.

This is a black lower vent trim piece designed for 30-inch wall ovens. It covers and finishes the ventilation opening at the bottom of the oven, providing a clean appearance while allowing proper airflow. Replace this trim if it is cracked, warped from heat exposure, or missing, which can affect both the look of the oven and its ventilation performance.

Replaces cracked, broken, or missing bottom vent trim on your wall oven. Covers the lower front vent opening for a finished look and proper airflow.

Replace your oven's support bracket if it's cracked, broken, or missing. This structural part secures internal components in wall oven units.

Illuminates your oven cavity for safe cooking monitoring. Replace when burned out or dim. Confirm fit with your model number before ordering.

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

• Loose or wobbly components within the appliance
• Panels or parts that are not securely attached
• Rattling or unusual noises due to loose parts
• Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

A shoulder screw that secures appliance components and provides a precise pivot or spacer point. Replaces a missing or worn screw to restore alignment, reduce rattling, and keep panels and assemblies securely in place. What it does:

• Provides a fixed-diameter shoulder for pivots, spacers, or mounting points in assemblies.
• Holds panels and moving components at the correct distance to prevent binding or friction.
• A missing or worn shoulder screw can cause misalignment, rattling, or loose parts during operation.
• Used where a smooth-bearing surface and controlled clearance are required between parts.

• Disconnect power to the appliance (unplug or shut off breaker) before servicing.
• Handle small fasteners carefully to avoid dropping into assemblies; magnetic pickup tools can help.
• Start threads by hand to avoid cross-threading; tighten snugly but avoid overtightening.

This is a replacement screw designed to work with a wide range of household appliances. It is used for many purposes in these appliances, from holding body panels together to securing electronics into control boards. However, screws are subject to damage through corrosion, impact, and improper installation/removal. In most cases, the primary damage to this screw is through corrosion – it may become rusted or corroded in place, depending on the appliance and the maintenance provided during its lifespan. The screw may also be stripped or rounded due to improper removal or installation. If the screw is damaged, lost, or corroded in place, it will need to be replaced. In most cases, removal will require nothing more than a Phillips head screwdriver or the appropriately sized socket with a ratchet. However, if the screw is damaged, it may require a tap set to remove it from its mounting location. Note that this is a genuine OEM replacement screw made from durable, high-quality metal, and is sold individually. It fits Whirlpool, Maytag, Roper, Estate, Amana, Crosley, and Thermador appliances. It is used in over 150 machines, ranging from washers and dryers to air conditioners.

Oven running too hot or too cold? This thermostat senses internal temperature and cycles heating elements for consistent baking and roasting results.