Amana Refrigerator SXD20JP Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: D7824706Q
The Replacement Icemaker is an OEM replacement part for Whirlpool made refrigerators including Whirlpool, Amana, Maytag, and many others. It is a component responsible for producing ice cubes or crushed ice, ensuring a constant supply of fresh ice for your convenience. Measuring approximately 11 inches long and 5 inches wide, this ice maker assembly is made of durable plastic and metal
Symptoms of needing a replacement icemaker include:
- No ice production or significantly reduced ice output
- Ice cubes appearing misshapen or clumped together
- Leaks or water buildup in the icemaker area
- Strange noises or grinding sounds coming from the icemaker
Causes of a faulty icemaker can include normal wear and tear over time, water supply issues, clogging or blockages, or electrical malfunctions.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.
Please note: that this ice maker is a replacement only and not suitable for add-ons or brand-new installations. It does not include the harness or hardware. For wire harness(Plug)order WPD7813010. For cover order WPW10289690. For shut off bail arm order WP67004028.
This part fixes the following symptoms
-
Ice maker dispenses too little ice
-
Ice maker not making ice
-
Ice maker won't dispense ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Ice maker stopped producing ice William W. • Southampton , NJ • July 31, 2015
My first hour: I investigated first by pulling out refridgerator to see if the water line hose was kinked. I started under the kitchen sink where it begins, coming from faucet water supply. Then I followed it to the back of the fridge to see if anything looked odd. Next I went to the ice maker itself. I investigated the ice maker by removing the freezer food sliding tray and hanging tray, and then unscrewing the door off the slides. When I looked inside at the ice maker, I saw the tube where...
Read more
More
$95.95
- Compare At:
-
$119.43
- You Save:
-
$23.48
Genuine Whirlpool part
By: Whirlpool
Part Number: 8009
Original Whirlpool light bulb, 40 watt.
Symptoms of needing to replace the light bulb include:
- Dimming or flickering light
- Complete lack of illumination inside the appliance
- Visible signs of damage or burnout on the bulb itself
Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.
Do-It-Yourself Stories from Customers like You
Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016
I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it...
Read more
More
$17.76
- Compare At:
-
$20.96
- You Save:
-
$3.20
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10662129
The Run Capacitor is an OEM part for Whirlpool appliances, designed to provide the necessary electrical charge to start and run the compressor motor. This part attaches to the compressor to aids in maintaining a consistent motor speed and ensuring smooth operation. The run capacitor plays a crucial role in the appliance's electrical system, storing and releasing energy as needed to power the motor.
Causes of a bad Run Capacitor include electrical surges, wear and tear over time, or overheating, which can lead to a failure in providing the necessary start-up energy or maintaining motor speed.
Symptoms of a bad Run Capacitor include:
- The appliance does not start.
- The motor shuts off shortly after starting.
- The appliance is humming but not running.
- Increased energy consumption.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Too warm
-
Clicking sound
-
Won't start
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
Both the freezer and refrigerator stopped cooling Raymond O. • Kerrville , TX • April 11, 2015
I have a Kitchen Aid side by side refrigerator/freezer which is 8 years old. One day it just stopped cooling. At first I was just going to junk it and purchase a new one. However, I took off the lower back cover and noticed the compressor was not running. I knew from experience that these compressors need a starter capacitor and relay and it is not uncommon for these parts to fail. I looked on the Internet for a video which showed how to remove the parts. I also found a video which showed how...
Read more
More
$42.95
- Compare At:
-
$50.68
- You Save:
-
$7.73
Genuine Whirlpool part
By: Whirlpool
Part Number: 833697
This OEM Replacement Part is a high-quality, 2-watt condenser fan motor for Whirlpool refrigerators.The motor is designed to optimize your refrigerator's cooling performance. This 115-volt motor operates with a clockwise rotation.
Symptoms of a bad condenser fan motor kit include:
- Gradual rise in interior freezer temperatures
- Inability to maintain consistent cooling performance
- Loud buzzing or grinding noises coming from inside
- Tripped breakers or failure to restart after service
Causes stem from normal wear of ball bearings as the high-efficiency motor operates continuously. Exposure to dust or debris introduced through openings accelerates wear over many years of use.
This OEM part is also compatible with brands including Kenmore, KitchenAid, and Danby.
This part fixes the following symptoms
-
Fridge runs too long
-
Noisy
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Conderser motor went out David W. • Durand , MI • April 03, 2014
After reviewing the 'how to' video on AppliancePartsPros.com, I unplugged the refrigerator and removed the back cover to access the motor. I then unplugged the wiring and removed the bad motor. I cut the clip plug and wired it to the new motor, installed the fan blade from the old motor and re-installed the new motor. After connecting the clip plug and re-installing the back cover, I plugged the refrigerator in and checked the interior about 5 minutes after the repair. Everything has been...
Read more
More
$61.95
- Compare At:
-
$73.72
- You Save:
-
$11.77
Genuine Whirlpool part
By: Whirlpool
Part Number: W11384469
The Door Switch is an OEM part for Whirlpool refrigerators. This switch plays a crucial role in monitoring the status of the refrigerator door. It detects when the door is open and closed and signals the refrigerator to suspend or resume cooling operations accordingly.
Causes of a bad door switch can include general wear and tear over time, exposure to moisture, or impact damage. Please check for proper connection and that the wires are intact before replacing the switch.
Symptoms of a bad door switch include:
- The refrigerator fails to resume cooling after closing the door
- The inside light fails to turn on when the door is opened
- Abnormal energy usage due to improper door monitoring
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Fridge interior light kept going out Phil D. • Phoenix , AZ • June 16, 2014
Replaced door switch - it took less than 5 minutes - works perfectly
Read more
More
$29.30
- Compare At:
-
$35.16
- You Save:
-
$5.86
Genuine Whirlpool part
By: Whirlpool
Part Number: R0131577
The Refrigerator Defrost Timer is an OEM Replacement Part designed to manage the automatic defrost system in Whirlpool freezers. Housed at the top inside of the appliance, this component shuts off the cooling system and activates the defrost heater. The timer operates at 120V 60Hz and activates for 33 minutes every 8 hours. The dial on the timer can be turned clockwise to advance it into and out of defrost.
Causes of a faulty Defrost Timer Kit can include electrical issues, mechanical wear and tear over time, or problems with the timer's internal components.
Symptoms of a bad Defrost Timer Kit include:
- Freezer not defrosting properly, leading to excessive ice buildup
- Refrigerator running constantly or not cooling effectively
- Condensation or moisture issues inside the refrigerator
- Error codes related to the defrost system
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Freezer not defrosting
-
Too warm
-
Fridge runs too long
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Amana br18vw refrigerator wasn't staying cold Adrian B. • Chicago , IL • February 08, 2015
I am not new to APP, fixed a tub belt on a Maytag dryer in the past. My frig started getting warm so I went onto to one of those "lists" sites and found a appliance repair place. The guys were great and came out right away. The tech said it was the cold control and $260 later my part was replaced, about 30 minutes. Great I thought until my frig started getting warm again. Those cold sensors on the beer bottles are a great indicator. Not wanting to spend another $260 I looked up on APP to see if...
Read more
More
$51.30
- Compare At:
-
$61.05
- You Save:
-
$9.75
Genuine Whirlpool part
By: Whirlpool
Part Number: W10857122
The Light Bulb is an OEM part for Whirlpool refrigerators. This part illuminates the water and ice dispenser area, providing visibility and ease of use, especially in low light conditions.
Over time, the light bulb can fail due to normal wear and tear, electrical surges, or damage from vibrations and impacts.
Symptoms of a bad light bulb include:
- The dispenser area not lighting up when activated
- Flickering or dim lighting
- The bulb failing to turn on consistently
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
My dryer was making noise James M. • Middletown , RI • September 19, 2014
I went on line and purchased all of the possible parts that could be worn out. I spent less than the service guy wanted to show up...The online videos were spot on. Two hours and it works like new! One of the best values on the Internet!
Read more
More
$13.47
- Compare At:
-
$16.03
- You Save:
-
$2.56
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10245167
This water inlet valve opens and closes to control water entering your appliance. A worn or stuck valve can cause fill problems or leaks—replacing it restores proper water flow and reliable operation.
- Regulates water flow into the unit during fill cycles
- Common symptoms: no water or slow fill, water continues to fill when off, leaks from the valve body, or humming/clicking without water flow
- Typically located where the household water line connects to the appliance
What's included: 1 water inlet valve assembly Install notes:
- Disconnect power and shut off the water supply before servicing
- Keep a towel or container handy to catch residual water
- Note hose and wire positions; take a photo for reference and transfer any brackets as needed
- Inspect/flush the supply line and screens; reconnect and check for leaks after installation
Do-It-Yourself Stories from Customers like You
Black flakes in ice and ice cubes in bucket frozen together then water stopped working in door Douglas M. • Deer Park , NY • January 23, 2023
Replaced water valve to fix water not going to door, easy enough to do.
Replaced icemaker which was corroded inside the cube-forming trays causing black flakes to come off stuck to the ice cubes, and was also leaking causing the water to drip into the ice bucket making one giant ice cube. Ten-minute job, which took an hour and a half. this is a 25-year-old unit and I only had access to the plug on the back of the icemaker, the other end was behind the rear wall. The wire was simply not long...
Read more
More
$103.70
- Compare At:
-
$123.40
- You Save:
-
$19.70
Genuine Whirlpool part
By: Whirlpool
Part Number: 2154436
This start relay controls power to the compressor's start winding so the refrigerator can start and run. Replacing a weak or burned relay restores dependable compressor start-up and can stop repeated clicking with warming temperatures.
- Energizes the compressor's start winding to provide initial torque, then disengages from the circuit
- Common failure symptoms: refrigerator not cooling or intermittently warm; compressor hums/clicks and won't start; relay rattles, smells burnt, or shows heat damage; overload trips
- Helps prevent hard-start conditions that stress the compressor
- The relay contacts are open/shorted, the compressor may fail to start and cycle off on overload
What's included: 1 start relay Install notes:
- Disconnect power before servicing; wear appropriate PPE
- Access the rear machine compartment; remove the relay cover on the compressor. Note wire positions, pull the old relay straight off the compressor pins, transfer wires, and fully seat the new relay in the same orientation
- If equipped, safely discharge the run capacitor; inspect the overload, wiring, and terminals for heat damage and address as needed
- Reinstall the cover. If the compressor still won't start, further diagnosis of the start device, capacitor, or compressor is required
Do-It-Yourself Stories from Customers like You
Relay Larry S. • Midlothian , TX • September 15, 2015
Removed old. Installed new.
Read more
More
$69.95
- Compare At:
-
$83.94
- You Save:
-
$13.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WPC8891605
This evaporator fan motor drives airflow across the evaporator coils and circulates chilled air throughout the cabinet. Replacing a weak or noisy motor restores proper air circulation, helping stabilize temperatures and overall cooling performance.
- Circulates air across the evaporator and distributes it between the freezer and fresh-food sections
- Helps maintain even temperatures and consistent cooling
- Common symptoms: fan not running or intermittent, loud humming/squealing/rattling from the freezer area
- Presents as weak airflow from vents or a warm refrigerator section while the freezer seems colder
What's included: 1 evaporator fan motor Install notes:
- Disconnect power before servicing to avoid electrical shock
- Access the motor behind the rear freezer panel; remove shelves/bins and panel as needed
- Transfer the existing fan blade, bracket, grommets, and wiring connectors from the old motor if required
- Match wire orientation, secure the motor, ensure the blade spins freely and blows the correct direction before reassembly
Do-It-Yourself Stories from Customers like You
Loud fan noise from the freezer Valerie G. • Sicklerville , NJ • October 27, 2014
Ordered the parts from you guys, evaporator fan motor, fan blade, and new grommets. unscrewed the inside back panel of the freezer, removed the old fan, installed the new one.
Read more
More
$181.49
- Compare At:
-
$217.79
- You Save:
-
$36.30
Genuine Whirlpool part
By: Whirlpool
Part Number: R0161092
This electronic freezer control assembly manages the freezer's control functions and settings to help restore reliable temperature regulation and responsive controls when the original control fails. Designed as a direct replacement control module. What it does:
- Controls freezer functions and user settings by communicating with sensors and other system modules.
- Commonly replaces a failed control board when the freezer won't maintain temperature, cycles erratically, or displays control-related errors.
- Restores responsive control panel behavior when buttons or digital settings stop working.
- Used when diagnostics point to control/board faults rather than mechanical components.
What's included: One freezer control assembly Install notes:
- Disconnect power to the appliance before starting any repair to avoid shock or damage.
- Handle the control board carefully and avoid static discharge; use antistatic precautions if available.
- Match connector locations and wire harness orientation; ensure all plugs seat fully before restoring power.
- If symptoms persist after replacement, recheck wiring, sensors, and diagnostic codes before ordering additional parts.
Do-It-Yourself Stories from Customers like You
Amana sxd26vw refrigerator side intermittently not cooling Donald K. • Lake Jackson , TX • February 02, 2016
I have an Amana refrigerator model SXD26VW. Periodically I was having an issue with refrigerator side not seeming like it was getting cool enough. I placed a thermometer in the fridge and was measuring temperatures ranging between 33 and 50 degrees F. Often, when the temperature was above 40 F, I noted that the compressor and fans were not running. Researching possible causes on-line, must likely causes were defrost timer and refrigerator temperature control assembly. I decided my...
Read more
More
$112.68
- Compare At:
-
$132.96
- You Save:
-
$20.28
Genuine Whirlpool part
By: Whirlpool
Part Number: WPB2150504
This drier is the factory replacement air/gas flow assembly that helps maintain proper airflow and drying performance in compatible laundry dryers. Replacing a worn drier restores consistent drying and reduces overheating risk. What it does:
- Directs and stabilizes heated air through the drum for efficient drying
- Helps prevent restricted airflow that can cause long dry times or damp laundry
- Supports safe exhaust flow to reduce the chance of overheating or lint buildup
- Works with the dryer's heating and ventilation components to maintain normal operation
What's included:
- One drier assembly as shown
Install notes:
- Disconnect electrical power before beginning service; if this is a gas dryer, turn off and disconnect the gas supply
- Follow the dryer manufacturer's service manual for disassembly and reassembly steps
- Use appropriate hand tools and avoid forcing parts; inspect venting and lint traps while replacing
More
$79.77
- Compare At:
-
$94.93
- You Save:
-
$15.16
Genuine Whirlpool part
By: Whirlpool
Part Number: WPC8972006
This defrost thermostat senses freezer temperature and opens/closes to stop the heater during normal cooling cycles, helping keep your freezer from over-defrosting and protecting stored food. Replaces a failed or intermittent defrost control sensor. What it does:
- Opens or closes at its preset temperature to stop the defrost heater when the evaporator is warm enough
- Prevents the heater from staying on continuously, reducing risk of frozen or water-leaking evaporator issues
- Commonly replaced when defrost cycles fail or frost builds on the evaporator
- Works with the refrigerator's defrost system to maintain proper ice buildup control
What's included: One defrost thermostat (Tri 111) — thermostat only Install notes:
- Disconnect power before inspecting or replacing the thermostat to avoid shock
- Mount the thermostat on the evaporator or bracket exactly as the original; improper placement can cause incorrect operation
- Handle the sensor gently and avoid bending or kinking capillary/tubing if present
Do-It-Yourself Stories from Customers like You
My side by side would work fine for intermittent periods of time and then would get to warm in both sides to provide adequate refrigeration/ freezing Kevin C. • Blanca , CO • April 09, 2015
Having worked in appliance sales many years ago, I was somewhat acquainted with the basic workings of the frost free refrigerator / freezers of ancient times. So I suspected that perhaps one or more of the mechanisms that control the defrost cycle was out of whack in some way. After thinking about the problem I immediately suspected that perhaps the Defrost Timer may have malfunctioned. This, because If I allowed the unit to sit idle for several days and then turned it back on, it then worked...
Read more
More
$55.95
- Compare At:
-
$66.02
- You Save:
-
$10.07
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: C3680309
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002087
The manufacturer no longer makes the duel socket as shown in the photo. It has been replaced by a single socket
Do-It-Yourself Stories from Customers like You
Light bulb socket James V. • Branchland , WV • October 17, 2014
Simple, just like the video I watched on line. It just popped out and all I had to do was unplug the wires off the old one and put the wires back on the new one. Real simple.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002642