Bosch Wall Oven HSLP751UCC Parts

The Heating Element is an OEM replacement part for Bosch electric wall ovens and ranges. It is responsible for providing precise heat control to oven cavities and cooking elements. 

Symptoms of an inadequate heating element include:

• Inability to reach or maintain proper oven temperatures  
• Fluctuating temperature readings inside oven cavities
• Slow or inadequate heating of elements for cooking 

Causes can be normal wear and tear after extended use. Exposure to splatters or residue over time may also reduce heating performance.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore wall ovens.

Fix oven overheating or temperature regulation issues with this temperature sensor. Common repair for wall ovens and ranges that won't heat accurately.

Fix an oven that won't reach set temperature or shows inaccurate readings. This temperature sensor monitors heat levels for proper cooking performance.

The Heating Element Oven is an OEM part compatible with Frigidaire and Electrolux wall ovens and ranges. It generates targeted heat through accurate temperature coils to provide consistent, reliable baking and broiling. The oven element ensures warm, golden finishes for any recipe.

Causes of a damaged element include mineral buildup impeding heat transfer. Physical bending or cracking of fragile coils can occur from accidental impact over years of use.

Symptoms of a failed element are:

• Uneven or insufficient heat for cooking/baking 
• Extended preheat or cook times to reach temperatures
• Hot and cold spots within the oven cavity
• Complete lack of heat requiring replacement

Replacing with this genuine OEM part restores optimal performance. Compatible with Kenmore, Gibson, and some Admiral wall ovens.
 

This is a metal wire rack designed to fit inside a wall oven cavity, providing a flat surface for placing baking sheets, pans, and casserole dishes at various height positions. It slides in and out on the oven's internal shelf supports. Replace this rack if it is warped, rusted, has broken or bent wires, or no longer slides smoothly on the supports.

This meat probe sensor is a temperature-sensing device that inserts into food while it cooks in the oven, allowing the oven to monitor the internal temperature and automatically stop cooking when the target temperature is reached. It connects to a jack inside the oven cavity via a heat-resistant cable. Replace this probe if your oven no longer reads the food temperature accurately, displays a probe error code, or if the cable or tip is visibly damaged.

Oven won't heat after self-clean cycle? A failed temperature limiter (high-limit thermostat) cuts power to protect against overheating. Direct fix.

The Outer Door Panel is an OEM part for Bosch range doors. Crafted from durable stainless steel, it protects the inner workings of the oven door while providing an elegant and smooth surface for users.

Symptoms of a bad outer door panel include:

• Aesthetic issues like dents, scratches, or rusting of the surface
• Warping or sagging of the panel  
• Gaps or misalignment that compromise the door seal
• Looseness or inability to properly close the door

Causes of failure may include normal wear and tear over time from daily use or accidental impacts and dents. Exposure to heat could cause warping. 

Replacing this genuine Bosch OEM part restores the pristine look and feel of the oven door. Compatible with 300 series gas and electric range models, it ensures safe and reliable performance. This replacement panel is also compatible with Thermador and Gaggenau ranges.
 

Uneven baking or slow heating in convection mode? A failed convection fan motor stops hot air circulation. Moderate DIY repair restores even cooking.

This replacement refrigerator shelf restores a stable, level surface for storing food and beverages. Swap in a new shelf to recover lost space, keep items organized, and reduce spills caused by a damaged or missing shelf.

• Provides a sturdy surface to support containers and organize contents
• Fits into the factory shelf rails for a secure, level placement
• Helps improve visibility and access to items inside the compartment
• Common symptoms: cracked or broken shelf, won't sit level, missing shelf, items tipping or spilling

What's included: 1 shelf Install notes:

• Remove food from the area and lift the old shelf straight out of the side rails
• Wear cut-resistant gloves and handle edges carefully to avoid damage
• Align with the rails and slide/set the new shelf fully into position—do not force
• Reseat and check for obstructions in the rails

Oven not heating evenly or baking properly? This heating element restores consistent heat distribution. DIY-friendly repair with basic tools.

Oven overheats or shows E115 error? The temperature limiter (safety thermostat) may have failed. Moderate difficulty repair requiring careful disassembly.

This Terminal Box is an OEM part for Bosch Built-In Ovens. Integral to the oven's electrical system, this component serves as a secure connection point for various electrical wires within the appliance.

A common issue with a malfunctioning Terminal Box is loose connections or damage to the terminal block due to heat exposure or aging. 

Symptoms of a defective Terminal Box may include:

• Inconsistent power supply to the oven
• Non-functional heating elements
• Sparks or electrical arcing within the terminal box area

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This is a cooling fan assembly that includes the motor and fan blade, designed to circulate air and cool internal oven components during and after use. It helps protect electronic controls and surrounding cabinetry from excessive heat. Replace this assembly if the oven overheats, nearby surfaces become unusually hot, or you no longer hear the cooling fan running after a cooking cycle.

Cushioning spacer that prevents metal-on-metal contact in ranges and wall ovens. Replace if worn, cracked, or missing to reduce noise and wear.

Oven door won't latch or stays locked? This door latch secures your oven door during cooking and prevents accidental openings. Moderate DIY repair.