Kenmore Ice Maker 106.1118555 (1061118555, 106 1118555) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10190935
The Ice Maker Control Module is an OEM replacement part for Whirlpool refrigerators. It acts as the brain of the ice maker, controlling and regulating its various functions to ensure efficient and consistent ice production.
Symptoms of a bad ice maker control module include:
- No ice production or intermittent ice production
- Ice maker not cycling on or off correctly
- Errors or error codes related to the ice maker on the refrigerator's display
- Unusual noises or clicking sounds from the ice maker
Causes of a bad control module can range from electrical issues, such as power surges or voltage fluctuations, to physical damage or wear and tear over time.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Ice maker not making ice
-
Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You
Ice maker was freezing up and not dumping properly Frank C. • Worcester , MA • March 04, 2016
SO I FIGURED THAT ALL THE MECHANICAL PARTS OF IT WERE FINE SO THE LOGICAL THING TO DO WAS TO REPLACE ELECTRICAL COMPONENTS WHICH CONSISTED OF THE THERMOSTAT {THE BRAIN} AND THE CONTROL MODULE WHICH I PURCHASED AT A VERY REASONABLE PRICE . I REASSEMBLED THE UNIT AND IT HAS BEEN WORKING LIKE NEW EVER SINCE. THANK YOU!
Read more
More
$66.66
- Compare At:
-
$113.89
- You Save:
-
$47.23
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627985
The Icemaker Cycling Thermostat is an OEM part for Whirlpool refrigerators. This thermostat plays a crucial role in the icemaker's operation by monitoring the temperature in the icemaker and ensuring it is at the appropriate level for proper ice production. It reads the temperature to determine when the icemaker should cycle on and off.
Causes of a bad icemaker cycling thermostat can include electrical malfunctions, temperature sensor issues, or wear and tear.
Symptoms of a bad icemaker cycling thermostat may include:
- Inconsistent ice production.
- The icemaker not cycling properly.
- The icemaker not dumping the ice into the ice bin.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Ice maker wouldnt make ice Ty G. • Lewis Center , OH • December 30, 2014
I used your online troubleshooting tips and watched the videos on your site. I determined my thermostat was defective, ordered the thermostat which arrived in two days and I replaced the thermostat and I now have a full bin of ice !!!
The do it yourself video was extremely helpful and made the repair very easy.
Thanks so much for the great service and quick delivery !!!
Read more
More
$53.95
- Compare At:
-
$64.74
- You Save:
-
$10.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP681249
The Screw is an OEM part for Whirlpool refrigerators, designed to secure components of the ice maker assembly. This screw maintains the structural integrity of the ice maker, ensuring that all parts are tightly fastened to prevent malfunction or inefficiency in ice production.
Causes of failure can include stripping of the screw threads through over-tightening or corrosion, leading to a less secure fit.
Symptoms of a bad Screw include:
- Loose or dislodged components within the ice maker assembly.
- Inconsistent or halted ice production due to components shifting.
- Unusual noises emanating from the ice maker as a result of loose parts.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The handle on the refrigerator door was broken and needed to be replaced Richard W. • Baltimore , MD • April 12, 2015
Took off the freezer door, took off the top hinge on the refrigerator door, replaced the handle, re-installed the top hinge and the freezer door. This is a two person job - one to remove the top hinge and replace the handle, while a second person holds the refrigerator door in place. Replacing the handle was easy. The most irritating part was figuring out what parts to order. The drawing of the refrigerator door (Drawing # 4) used to figure out what parts to order was not clear. I paid $8...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: W10823511
The Ice Maker Water Line is an OEM part for Whirlpool refrigerators. It supplies water from the household plumbing to the ice maker, ensuring a consistent and reliable production of ice cubes. This kit includes a 1/4-inch plastic water line that is approximately 72 inches long. The tubing will need to be cut to match the desired length.
Causes of a bad water line can include wear and tear from prolonged use, kinks or bends restricting water flow, or leaks due to punctures or cracks. A compromised water line can result in inadequate ice production or water leaks.
Symptoms of a bad ice maker water line include:
- Reduced or no ice production
- Leaking water from the refrigerator
- Visible cracks or damage to the water line
- Ice cubes that are smaller than usual
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Not dispensing water
-
Ice maker not making ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Ice maker fill tube leak Chad M. • Hollywood , FL • May 16, 2015
I watched your how-to video. It explained the repair PERFECTLY.
It was an easy repair and the video was very detailed. It took the guesswork out of the repair.
I was done in 5 minutes.
thanks for taking the time to post videos for your parts. I'll shop here again.
Best Regards,
Chad M
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10190929
The Ice Mold is an OEM part for Whirlpool refrigerators. This component forms the ice cubes in the icemaker, shaping the water into cubes as it freezes. The ice mold is crucial for the efficient production of ice, ensuring that each cube is properly formed and easily released into the ice bucket.
You should replace the ice mold if it shows signs of wear or damage. Causes of a bad ice mold can include mineral buildup from hard water, physical damage to the mold surface, or malfunctioning heating elements that prevent ice from releasing properly.
Symptoms of a bad Ice Mold include:
- Ice cubes not forming correctly or being irregular in shape
- Ice cubes sticking to the mold and not dispensing
- The icemaker not producing ice at all
- Leaks around the icemaker area
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice forming in the ice cube bin Bill J. • Scottsdale , AZ • December 13, 2014
I have a Whirlpool Side-by-side Model ED22PWXBW01. A year ago, the ice cubes started freezing together in the rear of the ice bin for no apparent reason. Although the problem started off small, it gradually grew much worse, and finally I could see water dripping out of the ice mold and into the bin during the fill cycle. Re-levelling the refrig didn’t help, nor did adjusting the cube size / fill level.
With guidance from the video, I removed the icemaker from the wall of the freezer. The...
Read more
More
$148.95
- Compare At:
-
$175.76
- You Save:
-
$26.81
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10289690
This ice maker cover shields the front of the ice maker assembly, protecting the module and moving parts from dust and accidental contact. Replacing a cracked or missing cover restores a clean, finished appearance and keeps components protected.
- Shields the ice maker's front components and control module
- Helps keep dust, splashes, and debris out of the mechanism
- Prevents accidental contact with moving ejector parts
- Replace if the cover is cracked, warped, missing, or will not stay attached
What's included: 1 ice maker cover Install notes:
- Unplug the refrigerator before servicing
- Access the ice maker in the freezer compartment
- Carefully release the retaining tabs and remove the old cover; note orientation
- Align the new cover and press until it snaps securely into place—do not force the tabs
Do-It-Yourself Stories from Customers like You
Ice maker quit working Peter S. • Lawton , MI • October 29, 2015
Replaced icemaker and shutoff arm. Easy project.
Read more
More
$8.36
- Compare At:
-
$9.95
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP628356
This icemaker fill cup and bearing assembly directs water from the inlet tube into the ice mold and provides the pivot point for the shutoff arm. Replacing a cracked or missing cup helps stop leaks, misdirected fills, and inconsistent ice production.
- Channels incoming water into the ice mold to prevent splashing and overfilling
- Provides the pivot/bearing for the ice level (shutoff) arm
- Helps maintain consistent cube size and reliable icemaker shutoff
- Typical symptoms: water or ice buildup under the icemaker, overfilling or hollow/irregular cubes, or a loose/binding shutoff arm
What's included: 1 fill cup and bearing assembly Install notes:
- Unplug the refrigerator and shut off the water supply before servicing
- Remove the ice bin and detach the icemaker to access the side-mounted cup
- Position the new cup directly under the fill tube; secure with existing hardware and verify the shutoff arm pivots freely in the bearing
- Restore power and water; run a test fill and check for leaks
This part fixes the following symptoms
-
Ice maker dispenses too much ice
-
Leaking
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Broken part Eva H. • Walnut Creek , CA • March 23, 2014
Watched online video and worked along - it was easy and quick - I was amazed!
Read more
More
$32.42
- Compare At:
-
$38.58
- You Save:
-
$6.16
Genuine Whirlpool part
By: Whirlpool
Part Number: 4318047
The Single Water Valve is an OEM part for Whirlpool refrigerators. This valve controls the flow of water to the refrigerator’s ice maker and water dispenser, ensuring a consistent and reliable supply of water for ice production and dispensing.
Causes of a bad single water valve can include wear and tear over time, mineral buildup from hard water, or electrical malfunctions.
Symptoms of a bad single water valve include:
- No water dispensing from the refrigerator
- The ice maker not producing ice
- Leaks around the valve area
- Unusual noises when the water dispenser is activated
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
This part fixes the following symptoms
-
Ice maker not making ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Leaking valve on ice maker Richard D. • Front Royal , VA • March 15, 2014
Order new valve
Read more
More
$44.95
- Compare At:
-
$53.04
- You Save:
-
$8.09
Genuine Whirlpool part
By: Whirlpool
Part Number: WP681414
Specs: 10-16 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Dryer drum was beginning to stall occasionally Dana J E. • San Marcos , CA • March 17, 2015
After shopping for a new Whirlpool Thin Twin Stack, Found appliance parts pros online and decided to take it apart to see if repair was a possibility. APPro's online instructions were easy to follow, in a couple hours it was apart, and I placed the order. Reg ground took a week from NY, so the laundry piled up that week. The parts arrived on Monday morrning, by afternoon the machine was running like new! The cause was the belt tensioner pulley had frozen. Replaced it, drum wheels,snap...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627018
Size: 1/4 inch. Nut for plastic water line.
Do-It-Yourself Stories from Customers like You
Broken y connector off of water valve on amana refridgerator Greg S. • El Dorado Hills , CA • October 19, 2014
Ordered part from AppliancePartsPros.com and received it 2 days later. Put the part in, fit like a glove, water and ice cube maker working flawlessly again with no leaks. Thanks.
Read more
More
$11.95
- Compare At:
-
$14.34
- You Save:
-
$2.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627792
This ice maker shut-off arm is the wire lever that detects the ice bin level and stops production when raised. Replace a bent, broken, or missing arm to restore reliable on/off control of your icemaker.
- Monitors bin fullness; in the up position it opens the internal switch to pause ice making
- Lowers as ice is used so the icemaker can resume cycles
- Restores manual shutoff when you lift the arm
What's included: One shut-off arm Install notes:
- Disconnect refrigerator power and turn off the water supply before servicing
- Remove the ice bin for access; open the icemaker front cover if your model has one
- Pull the old arm straight out of the pivot holes; align and fully seat the new arm so it moves freely
- Restore power and lower the arm to resume ice production; the arm raises and stops production when the bin is full
Do-It-Yourself Stories from Customers like You
Ice maker would not shut off. Steve N. • Naples , FL • February 22, 2021
Ordered a new control arm.
Read more
More
$54.34
- Compare At:
-
$65.21
- You Save:
-
$10.87
Genuine Whirlpool part
By: Whirlpool
Part Number: 4387491
These inserts are for 1/4 inch plastic tubing. Package of 4.
More
$11.95
- Compare At:
-
$13.22
- You Save:
-
$1.27
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2182124
Ice stripper removes ice cubes from the ice maker mold so the dispenser or storage bin fills properly. Replacing a worn or broken stripper helps the ice maker eject cubes cleanly and reduces ice jams or stuck cubes. What it does:
- Pushes or guides harvested cubes out of the ice mold into the bin during the ice maker's harvest cycle.
- Prevents cubes from sticking in the mold; a damaged stripper can cause incomplete ejection or leftover ice in the mold.
- Works with the ice maker's ejector mechanism to maintain consistent cube release and storage.
- A faulty or broken stripper may lead to noisy operation, partial fills, or visible ice build-up in the mold.
What's included: One ice stripper. Install notes:
- Disconnect power to the appliance before starting any repair to avoid electrical shock.
- Remove the ice maker or access panel per the manufacturer's instructions to reach the stripper; keep small parts and screws organized.
- Inspect the ice mold and surrounding components for damage or ice build-up; clear ice before installing the new stripper.
- After installation, restore power and run a test harvest cycle to ensure proper cube ejection.
Do-It-Yourself Stories from Customers like You
One of the teeth on the ice stripper was broken off Michelle F. • Hines , OR • August 07, 2014
Simply replaced the broken ice stripper with a new one.
Read more
More
$47.95
- Compare At:
-
$57.06
- You Save:
-
$9.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2195914
This support mounts in the dispenser area to secure the ice housing assembly. It helps keep the chute and door properly aligned so ice dispenses smoothly and the opening seals as designed.
- Supports and positions the ice housing/chute assembly in the freezer door
- Helps maintain proper alignment and sealing of the ice door/flapper
- Reduces wobble or flex that can affect dispensing performance
- Typical signs it may be needed: loose or misaligned dispenser housing, ice or air leaking at the chute, frost buildup around the dispenser, inconsistent ice dispensing
What's included: 1 ice housing support Install notes:
- Disconnect power to the refrigerator before servicing
- Remove the dispenser trim/control to access the housing; handle wiring and tabs carefully
- Remove mounting fasteners, replace the support, and transfer any reusable hardware
- Reassemble, restore power, and test ice dispensing and chute seal
Do-It-Yourself Stories from Customers like You
Dark bits of something embedded in the ice cubes and a crack in one of the plastic pieces of the ice maker Brett G. • Willow Park , TX • October 09, 2017
Replaced the ice tray and motor mount plate. While I was there I replaced the thermostat also. New parts arrived in a day and a half.
Read more
More
$48.95
- Compare At:
-
$58.74
- You Save:
-
$9.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489128
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2315522
This thermostat retainer clip secures the defrost thermostat to the evaporator tubing in your refrigerator or freezer, maintaining firm contact for accurate temperature sensing and dependable defrost operation.
- Holds the thermostat firmly against the evaporator line for proper temperature feedback
- Helps prevent a loose or dangling thermostat that contribute to frost buildup and poor defrost performance
- Restores correct mounting when the original clip is cracked, bent, or missing
- Common signs include a broken clip or a thermostat not attached to the coil
What's included: 1 thermostat retainer clip Install notes:
- Disconnect power to the appliance before servicing; wear cut-resistant gloves
- Access the evaporator compartment; remove accumulated frost/ice as needed without prying on coil fins
- Position the thermostat body flat against the tubing and snap the retainer over it, avoiding pinched wires or damaged fins
- Confirm a secure fit and proper wire routing before reassembling and restoring power
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51