Kenmore Refrigerator 106.50282010 (10650282010, 106 50282010) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2188656
The Crisper Pan is an OEM part for Whirlpool refrigerators. It is designed to store fruits and vegetables at optimal humidity levels, helping to keep them fresh for longer periods. This drawer fits into the lower section of the refrigerator and is made from durable, clear plastic, allowing for easy visibility of its contents.
Over time, the pan can crack or break due to frequent use, overloading, or accidental impacts.
Symptoms of a bad Crisper Pan include:
- Cracks or breaks in the pan
- Difficulty sliding the pan in and out
- Reduced storage capacity
- Produce not staying fresh
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Touchpad does not respond
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Replace Whirlpool Crisper Pan Charles B. • Leitchfield , KY • March 25, 2014
Located the Whirlpool crisper pan on AppliancePartsPros.com on Monday morning and received the crisper pan on Tuesday afternoon. Doesn't get any better than than!! I will be repeat business in the future!!
Read more
More
$85.95
- Compare At:
-
$101.42
- You Save:
-
$15.47
Genuine Whirlpool part
By: Whirlpool
Part Number: 8009
Original Whirlpool light bulb, 40 watt.
Symptoms of needing to replace the light bulb include:
- Dimming or flickering light
- Complete lack of illumination inside the appliance
- Visible signs of damage or burnout on the bulb itself
Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.
Do-It-Yourself Stories from Customers like You
Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016
I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it...
Read more
More
$17.76
- Compare At:
-
$20.96
- You Save:
-
$3.20
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10321304
The Door Shelf Bin is an OEM replacement part for Whirlpool refrigerators, designed to provide storage capacity and organization within the fridge. This bin attaches to the inside of the refrigerator door, offering a convenient place to store jars, bottles, and other condiments.
Symptoms of a bad Door Shelf Bin include:
- Cracks or breaks in the bin
- The bin detaching from the door
- Difficulty in sliding the bin in or out
- Noticeable sagging when loaded
Causes of these issues often stem from overloading the bin with too much weight, accidental damage from items being pushed in too forcefully, or simply the natural wear and tear that occurs over time.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Needed extra door shelf bins for dry ingredients. ordered wrong size thru ebay. Kay S. • Aiea , HI • March 12, 2014
While looking for parts thru AppliancePartsPros.com, I found a diagram with my refrig model #
for the door shelf bin. It was a perfect match. Prior to that I've spent countless hours searching
and became very frustrated. The diagrams and videos were very helpful.
Thank you,
KShigeta
Read more
More
$44.95
- Compare At:
-
$53.49
- You Save:
-
$8.54
Genuine Whirlpool part
By: Whirlpool
Part Number: EDR3RXD1
The Whirlpool Everydrop Water Filter 3 is a genuine OEM replacement part designed to improve the quality and taste of water while filtering out impurities. This filter is specifically designed for side-by-side refrigerators that accept Filter 3. Contains the ability to reduce 66 contaminants including lead, mercury, asbestos, and industrial chemicals. It helps to provide clean, fresh-tasting water. The filter needs to be changed every 6 months or 200 gallons for optimal performance. The fast and easy filter change requires no special tools. Simply push until you hear the receiver click into place. This NSF-certified filter is a reliable and affordable way to ensure that your family is drinking clean, refreshing water. SOLD INDIVIDUALLY
Specs:
- Filter Media: Carbon Block
- Operating Pressure: 30-120 psi
- Operating Temperature: 33-100 °F
- Flow rate: 0.5 gpm
- Material: Plastic
- Color: White
- Approximate Dimensions: 12 inches long, 2 inches in diameter
Do-It-Yourself Stories from Customers like You
Water dispenser stopped working. Mark S. • Eliot , ME • January 13, 2021
I watched the Appliance Parts Pros repair video and decided to remove the front panel to diagnose the problem. While the repair video is excellent, I could not remove the ice/water dispenser front panel with a putty knife. On my model, 106.56234400, there is no clip that can be released by sliding a putty knife up under the front panel. It took a little effort but I was able to pop the left lower corner clip just by pulling it out with my fingers. Once the cover was off I could see that the...
Read more
More
$83.95
- Compare At:
-
$99.06
- You Save:
-
$15.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2188664
The Meat Pan is an OEM part for Whirlpool refrigerators. This component provides a dedicated storage area within the refrigerator, designed to keep meats at an optimal temperature for freshness. The meat pan slides in and out for easy access and helps to organize and separate meat products from other items in the fridge. The pan measures approximately 14.96" long x 16.456" wide by 7.598" high
Common causes of a bad meat pan include damage from impact, wear and tear from frequent use, or warping due to temperature changes.
Symptoms of a bad meat pan include:
- Cracks or breaks in the pan
- Difficulty sliding the pan in and out
- The pan not fitting securely in its designated space
- Food not being kept at the correct temperature
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken drawer Vern W. • Manhattan , KS • August 14, 2014
Installed replacement drawer
Read more
More
$56.95
- Compare At:
-
$67.20
- You Save:
-
$10.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10225581
The Defrost Thermostat is an OEM part for Whirlpool refrigerators. It is responsible for monitoring the temperature of the evaporator coils. When the coils reach a certain temperature, the thermostat signals the defrost heater to turn on and melt any ice or frost buildup. This ensures proper airflow and prevents excessive ice formation.
Causes of a bad defrost thermostat can be attributed to normal wear and tear over time or electrical malfunctions.
Symptoms of a bad defrost thermostat include:
- Excessive ice buildup in the freezer section.
- Inadequate cooling in the refrigerator compartment.
- Frost or ice accumulating on the evaporator coils.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Frost buildup
-
Freezer not defrosting
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Fridge side wasn't staying cold massive ice build up in freezer ice blockage in fan duct Christopher M. • Yorba Linda , CA • December 15, 2014
Condenser was encased in solid block of ice due to automatic defrost not working. Replaced thermostat and ADC control board. Working fine now. Most tedious part was using a heat gun to melt all the ice off the condenser coils.
You will need a couple small wire nuts to splice the new thermostat into the existing harness (they are not included).
Service tech wanted over $400 to repair, fixed it myself for half that. Thanks !
Read more
More
$33.95
- Compare At:
-
$40.74
- You Save:
-
$6.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2182179
The Door Upper Closure Cam is an OEM part for Whirlpool refrigerators. It is designed to provide proper closure and alignment for the refrigerator door. The upper closure cam is located on the top hinge of the refrigerator door and works in conjunction with the lower closure cam to ensure a tight seal and prevent air leaks.
Causes of a bad upper closure cam can include regular use, accidental damage, or excessive force applied to the door.
Symptoms of a bad upper closure cam include:
- Difficulty in closing or opening the refrigerator door.
- The door not staying securely closed.
- Uneven gaps or misalignment between the door and the refrigerator cabinet.
- Excessive noise or squeaking when operating the door.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Door sweating
-
Door won't open or close
-
Clicking sound
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Door clicking, door not closing easily Mike K. • Broadview Heights , OH • January 27, 2020
Replaced both sets of door cams on my Kenmore Elite Refrigerator. The most important thing to know is that you DO NOT have to remove the doors from the refrigerator to replace BOTH sets of cams. You just have to remove the lower grill which is a snap fit (I also turned off the water and unplugged the unit). My fridge has an ice and water dispenser where the water and electrical lines go through the cams on the left side. Be sure to order the correct parts as the cam holes on the freezer side...
Read more
More
$9.95
- Compare At:
-
$11.94
- You Save:
-
$1.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2180226
The Control Bracket is an OEM part for Whirlpool refrigerators. It serves as a foundational component within the refrigerator's control panel, securing and supporting various controls and electrical components.
Causes of a bad Control Bracket can include physical damage from impact or excessive force, corrosion due to moisture or chemical exposure, and general wear and tear over time. A compromised control bracket can lead to misalignment of control components, difficulty in setting controls, or even failure of the refrigerator to respond to control inputs properly.
Symptoms of a bad Control Bracket include:
- Loose or unresponsive controls
- Difficulty adjusting refrigerator settings
- Visible damage or warping of the bracket
- The refrigerator not maintaining set temperatures correctly
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Water dispenser stopped working. Mark S. • Eliot , ME • January 13, 2021
I watched the Appliance Parts Pros repair video and decided to remove the front panel to diagnose the problem. While the repair video is excellent, I could not remove the ice/water dispenser front panel with a putty knife. On my model, 106.56234400, there is no clip that can be released by sliding a putty knife up under the front panel. It took a little effort but I was able to pop the left lower corner clip just by pulling it out with my fingers. Once the cover was off I could see that the...
Read more
More
$16.95
- Compare At:
-
$20.34
- You Save:
-
$3.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10329686
The Door Cam is an OEM part for Whirlpool refrigerators. It functions as a critical component in the door closing mechanism, facilitating the smooth opening and closing of the refrigerator door. The door cam helps to lift and lower the door slightly as it opens and closes, reducing stress on the hinges and ensuring a tight seal.
Causes of a bad Door Cam can include wear from regular use, cracking due to excessive force when opening or closing the door, or misalignment that prevents the door from functioning properly.
Symptoms of a bad Door Cam include:
- The refrigerator door making noise when opened or closed
- Difficulty in shutting the door completely
- Increased energy consumption as the fridge works harder to maintain its internal temperature due to a poor seal
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Door won't open or close
-
Door sweating
-
Fridge too warm
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Door clicking, door not closing easily Mike K. • Broadview Heights , OH • January 27, 2020
Replaced both sets of door cams on my Kenmore Elite Refrigerator. The most important thing to know is that you DO NOT have to remove the doors from the refrigerator to replace BOTH sets of cams. You just have to remove the lower grill which is a snap fit (I also turned off the water and unplugged the unit). My fridge has an ice and water dispenser where the water and electrical lines go through the cams on the left side. Be sure to order the correct parts as the cam holes on the freezer side...
Read more
More
$9.95
- Compare At:
-
$11.94
- You Save:
-
$1.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10276348
The Glass Shelf is an OEM replacement part for Whirlpool refrigerators. It is a sturdy and transparent shelf designed to provide ample storage space within the refrigerator compartment while allowing clear visibility of the items stored on it. Measuring approximately 17.32" x 18.10", this shelf offers ample space for organizing your food items. The shelf is a curved-front design with glass measuring approximately 13.74" x 14.88".
Causes of needing to replace a glass shelf can include physical damage from impact or excessive force, warping due to temperature fluctuations or moisture over time, or general wear and tear from repeated use.
Symptoms of a bad glass shelf include:
- Visible cracks or chips in the glass
- The shelf becoming loose or unstable, causing items to slide off
- Difficulty sliding the shelf in and out of its designated position
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Note:
- If you need a "snack pan" shelf with a straight front, order WPW10276341.
Do-It-Yourself Stories from Customers like You
Neede another shelf to better organize refrigerator Dale F. • Fort Worth , TX • June 20, 2014
Found the shelf I needed and was cheaper than branded website. Shipped quickly and now I am much happier with my refrigerator.
Read more
More
$157.95
- Compare At:
-
$187.96
- You Save:
-
$30.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22002263
The Dryer Light Bulb is an OEM part for Whirlpool dryers. This bulb is specifically designed to provide illumination inside the dryer drum, allowing for better visibility when loading and unloading laundry. It ensures a well-lit drying environment.
Causes of a bad dryer light bulb can include normal wear and tear, electrical issues, or accidental breakage.
Symptoms of a bad dryer light bulb may include:
- The bulb not turning on when the dryer door is open.
- Dim or flickering light inside the dryer drum.
- A burnt-out or broken bulb.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Squeaky noise and not fully drying David H. • Santa Clarita , CA • September 20, 2019
Originally the dryer was squeaking a lot, so I purchased a new belt tensioner, but the original tensioner was an old-style no wheel tensioner, so that wasn't the source of the squeaking.
I saw a lot of lint had built up inside the unit where there shouldn't have been that much. So I viewed a few videos on the Appliance Pros site and saw that the rear wheel guides were the cause of the squeaking and the rear felt drum and blower housing seal needed to be replaced. The rear blower housing was...
Read more
More
$15.55
- Compare At:
-
$18.50
- You Save:
-
$2.95
Genuine Whirlpool part
By: Whirlpool
Part Number: 8201515
The Icemaker Motor Module is an OEM part for Whirlpool refrigerators. This module is the heart of the icemaker, responsible for controlling the ice production cycle. It manages the timing, water fill, and ice tray ejection, ensuring that your refrigerator consistently produces and dispenses ice.
Symptoms of a bad Icemaker Motor Module include:
- The icemaker failing to produce ice,
- Ice cubes not ejecting into the bin,
- The icemaker making unusual noises during operation.
Causes of motor module failure typically involve mechanical wear from continuous use, electrical failures such as short circuits, or water damage affecting the electronic components.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Ice maker won't dispense ice
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
The refrigerator ice maker was not working Lydia I. • Miami , FL • September 19, 2014
After finding out the cost that we would have to pay for the repair locally, I went to Appliance parts pro.com. with the intention of finding out the cost for parts. We had been quoted $100 for the first hour which included repair if it could be done under the first hour plus parts. And they added that the typical repair for the ice maker was between $200 and $500.
Fortunately we are very organized and had the original paperwork of the refrigerator which has all parts and numbers for the...
Read more
More
$93.95
- Compare At:
-
$113.94
- You Save:
-
$19.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2198628
The Drive Shaft Seal is an OEM part for Whirlpool washing machines. It plays a role in preventing water from leaking out of the tub and onto the drive system. This seal ensures that the connection between the drive shaft and the washing machine tub remains watertight, protecting the mechanical components from water damage and corrosion.
Causes of a bad drive shaft seal include aging and deterioration of the material, excessive load sizes that strain the washer, and foreign objects caught between the seal and the shaft, which can lead to tears or breaks.
Symptoms of a bad Drive Shaft Seal include:
- Water leakage from the underside of the washing machine
- Unusual noises during the spin cycle
- A visible tear or damage to the seal itself
- Increased vibration and movement of the machine during operation
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Ice would not dispense Annie V. • Missouri City , TX • February 23, 2016
My refrigerator was not dispensing ice. I could hear the motor activating but noticed the ice auger was not turning. My old drive shaft was stripped on both ends. Video was very helpful and it was an easy fix for someone with little handyman experience.
Received my order much faster than expected! The parts arrived the next day and paid for the standard shipping charge. I live in Texas.
Read more
More
$12.95
- Compare At:
-
$15.54
- You Save:
-
$2.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2180224
The Ice Dispenser Guide is an OEM replacement part for Whirlpool brand refrigerators. These brands also include Maytag, KitchenAid, Norge, Roper, Estate, and Kenmore models. It directs ice from the ice bucket to the dispenser chute. It helps to prevent jams by guiding the ice through the dispenser system smoothly and evenly.
You should replace the ice dispenser guide if you notice any signs of wear or damage, such as cracks or warping. A damaged dispenser guide can cause ice jams or blockages. This can prevent ice from dispensing properly or create excessive noise or vibration during the dispensing process.
Get yours today and restore proper ice dispensing function and prevent future issues with the ice dispenser system.
This part fixes the following symptoms
-
Ice maker dispenses too much ice
See more...
Do-It-Yourself Stories from Customers like You
Ice cube dispenser/flap was broken not actuating the ice bucket motor. Peter P. • Sonoma , CA • July 24, 2023
Ice Door Kit, Control Bracket, and Ice Dispenser Guide were purchased. I followed two videos on replacing the parts. The Control Bracket WP2180226 / AP6005965, was straight forward and I discovered a snapped pin on the old bracket causing an electric switch to be out of place... that repair was easy.
When it came to the hinges of the ice chute, I discovered the snap-in, on right side, of the hinge was cracked... this is why the pin escaped. This cracked part is molded into the entire...
Read more
More
$16.95
- Compare At:
-
$20.17
- You Save:
-
$3.22
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2162361
The Micro Switch is an OEM part for Whirlpool refrigerators that is responsible for controlling the ice and water dispenser. The switch operates by responding to mechanical actions, like the pressing of the dispenser paddle or button to open or close to allow water and ice to be dispensed.
Symptoms of a bad Micro Switch include:
- The ice or water dispenser not functioning
- Intermittent operation of the dispenser
- Stuck dispenser preventing ice or water from stopping
Causes of a bad Micro Switch can include physical damage from heavy use, wear and tear over time, or electrical issues such as short circuits that impair the switch's function.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Water dispenser stopped working. Mark S. • Eliot , ME • January 13, 2021
I watched the Appliance Parts Pros repair video and decided to remove the front panel to diagnose the problem. While the repair video is excellent, I could not remove the ice/water dispenser front panel with a putty knife. On my model, 106.56234400, there is no clip that can be released by sliding a putty knife up under the front panel. It took a little effort but I was able to pop the left lower corner clip just by pulling it out with my fingers. Once the cover was off I could see that the...
Read more
More
$19.95
- Compare At:
-
$23.94
- You Save:
-
$3.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10276341
The Snack Pan Shelf is an OEM part for Whirlpool refrigerators. It provides an additional level of storage space on the inside.
The shelf is designed to fit securely on the side walls of the fridge cavity measuring 18 inches wide by 18-1/2 inches deep. If you need a shelf with a curved front, order WPW10276348.
Symptoms of a bad snack pan shelf include:
- Cracks or breaks in the shelf material
- Inability to lock the shelf into the desired position
- Wobbling or instability
- Missing retainers that hold the shelf in place
Causes of a bad shelf can be normal wear and tear over time from repeated removal and washing. Accidental drops or impact damage may also affect structural integrity.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
My snack drawer broke Stacy P. • Reading , PA • November 08, 2015
I tried duct tape but then decided to buy the parts from Appliance Pro's and fix it correctly. It looks brand new now. Thank You :)
Read more
More
$147.95
- Compare At:
-
$177.54
- You Save:
-
$29.59