Kenmore Refrigerator 253.48022892 (25348022892, 253 48022892) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 215846602
The Defrost Timer is an OEM part for Frigidaire refrigerators. It is an essential electronic component that controls the automated defrost cycle of the refrigerator. The defrost timer monitors run times and temperatures to determine when to initiate the defrost process. It allows the refrigerator to operate efficiently by preventing excessive ice buildup. This defrost timer is designed to run for 30 minutes every 8 hours.
Symptoms of a bad defrost timer include:
- Inability to initiate or maintain the defrost cycle
- Excessive ice buildup in the freezer compartment
- Erratic temperature fluctuations
- The refrigerator running excessively or displaying other performance issues
Causes of a bad defrost timer can be normal wear and tear over time. Environmental factors like power surges or fluctuations may also impact the electronic timer functionality.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
This part fixes the following symptoms
-
Frost buildup
-
Fridge runs too long
-
Freezer too cold
-
Freezer not defrosting
See more...
Do-It-Yourself Stories from Customers like You
Not cooling properly eventually evaporator fan failure Richard D. • Wood Ridge , NJ • April 25, 2016
My problem first showed up as varying temperature in both sections of my old mid 1970’s Frigidaire model FPCI-170T-7 refrigerator, which is not listed on most appliance repair databases.
Running on the warm side from time to time, as well as sudden fan noise (probably the fan blade hitting ice build-up on the evaporator coil) alerted me to a possible defrost system problem, since the compressor was cooling. The evaporator fan eventually failed after a day or so, and a major repair was...
Read more
More
$37.95
- Compare At:
-
$45.54
- You Save:
-
$7.59
Genuine Wci part
By: Wci
Part Number: 316538904
The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.
Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.
Symptoms of a bad Light Bulb include:
- The oven interior remains dark when the light switch is engaged.
- Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
- Completely non-functional light, which can hinder your ability to monitor cooking progress.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
The bottom heating element wasn't working in top oven Kevin Scott W. • Parker , CO • January 09, 2015
Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old...
Read more
More
$23.95
- Compare At:
-
$28.74
- You Save:
-
$4.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308000010
The Evaporator Fan Blade is an OEM part for Frigidaire refrigerators, designed to circulate air over the refrigerator coils and through the food compartment. The fan blade works in conjunction with the evaporator fan motor, and together, they play a key role in the cooling process by distributing cool air evenly throughout the refrigerator and freezer.
Causes of a bad evaporator fan blade can include physical damage, such as cracks or bends in the blade itself, which can occur over time due to wear and tear or during cleaning and maintenance.
Symptoms of a bad Evaporator Fan Blade include:
- Unusual noises coming from the refrigerator, such as humming or buzzing
- The refrigerator or freezer compartment is not cooling adequately
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
1: loud noise on freezer side. 2: no water dispensing Matt M. • Pickett , WI • February 05, 2021
1. After hearing a loud noise on the freezer side of unit about halfway up, I started investigating what it could be? My conclusion was evaporator motor or evaporator fan blade. One of the signs of this issue was a distinct change in sound when I opened the freezer door. I ordered a new motor and blade, not knowing exactly what it was.
2. I couldn't get water to dispense, so I changed the filter and that wasn't the problem. I ordered a water valve and crossed my fingers. These parts arrived...
Read more
More
$47.95
- Compare At:
-
$57.06
- You Save:
-
$9.11
Genuine Frigidaire part
By: Frigidaire
Part Number: 215473602
The Door Shelf Support is an OEM part for Frigidaire refrigerators. It serves as a critical component in the refrigerator's door, providing support for the shelves that hold various items like bottles, jars, and other containers. This support measures approximately 2 1/2" tall x 1 1/2" deep.
Causes of a bad door shelf support can include cracking due to overloading, material fatigue from regular use, or accidental damage. When the supports weaken or break, it affects the structural integrity of the door storage, leading to potential spills or damaged goods.
Symptoms of a bad Door Shelf Support include:
- Shelves leaning or sagging noticeably
- Difficulty in fitting the shelf into the door
- Cracks visible in the support
- Shelves falling off or failing to hold items securely
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken water control on door Greg K. • Newton , MA • October 07, 2014
Easy to replace with the shield and paddle assembly. Steps are: 1. use a flat head screwdriver to push the tabs at the base of the control panel. remove the wire connectors by gently prying them straight off. 2. remove the 4 phillips screws holding in the old assembly. 3. Install the new assembly by carefully putting the paddle behind the water pipe that sticks out. You may have to push the paddle one way to get it around the pipe and then back into place. 4. reinstall the screws. 5. reconnect...
Read more
More
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89
Genuine Frigidaire part
By: Frigidaire
Part Number: 215267701
The Door Shelf Support is an OEM part for Frigidaire refrigerators, designed to hold and support the shelves on the inside of the refrigerator door. This part ensures that door shelves are securely mounted, providing stable storage for bottles, condiments, and other items.
Symptoms of a failing Door Shelf Support include:
- Shelves becoming loose or sagging
- Difficulty in keeping items securely on the door shelves
- Cracks or breaks in the support
Causes of a bad Door Shelf Support can range from normal wear and tear, to accidental damage, such as overloading the door shelves with too much weight or impact from moving items in and out. Over time, the stress of weight and use can lead to the supports becoming damaged.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Broken water control on door Greg K. • Newton , MA • October 07, 2014
Easy to replace with the shield and paddle assembly. Steps are: 1. use a flat head screwdriver to push the tabs at the base of the control panel. remove the wire connectors by gently prying them straight off. 2. remove the 4 phillips screws holding in the old assembly. 3. Install the new assembly by carefully putting the paddle behind the water pipe that sticks out. You may have to push the paddle one way to get it around the pipe and then back into place. 4. reinstall the screws. 5. reconnect...
Read more
More
$7.95
- Compare At:
-
$9.38
- You Save:
-
$1.43
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303917954
The Defrost Thermostat is an OEM part for Frigidaire refrigerators. It monitors the temperature of the evaporator coils and activates the defrost heater when necessary. This process prevents frost buildup on the coils, ensuring the refrigerator maintains optimal cooling efficiency.
You should replace the defrost thermostat if it becomes faulty or damaged. Common causes of a bad defrost thermostat include electrical failures, regular wear and tear, or temperature fluctuations that can degrade the component over time.
Symptoms of a bad defrost thermostat include:
- Excessive frost buildup on the evaporator coils
- Refrigerator not cooling properly
- The defrost cycle not activating
- Increased energy consumption
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Freezer too cold
-
Freezer not defrosting
-
Fridge runs too long
-
Fridge too cold
See more...
Do-It-Yourself Stories from Customers like You
Frig not cold and not all item in the freezer were being frozen ice not being made Gary M. • Raleigh , NC • September 30, 2015
My Frigidaire side by side refrigerator/freezer suffered a catastrophic failure. The symptoms were as follows:
1) Frig not cold
2) No Ice being made in the freezer section
3) Items at the back of the freezer were frozen but items on the door shelves would not freeze. The back of the freezer was cold but the closer you got to the door the warmer it got.
After removing everything from the unit I saw that there was substantial ice buildup on back of the freeze, specifically around the vents,...
Read more
More
$39.95
- Compare At:
-
$47.14
- You Save:
-
$7.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 218396700
The Handle Mounting Block is an OEM part for Frigidaire refrigerators. This component anchors the refrigerator door handle assembly while also reinforcing the door structure.
Causes of a bad mounting block can include cracks developing from repeated opening/closing stresses, broken fasteners loosening its installation, or residual damage during door replacement or repair attempts.
Symptoms of a bad handle mounting block include:
- Loose, sagging or misaligned door handles
- Doors difficult to open or not staying securely closed/latched
- Noisy rattling coming from the door handle area
- Cracks or breaks visible in the mounting plastic
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken handle Jack M. • Memphis , TN • November 04, 2018
No problem, 1 min to fix
Read more
More
$44.95
- Compare At:
-
$53.49
- You Save:
-
$8.54
Genuine Frigidaire part
By: Frigidaire
Part Number: 215503203
Specs: 10-16 X 0.500
Do-It-Yourself Stories from Customers like You
Broken handle Jack M. • Memphis , TN • November 04, 2018
No problem, 1 min to fix
Read more
More
$6.59
- Compare At:
-
$7.25
- You Save:
-
$0.66
Genuine Frigidaire part
By: Frigidaire
Part Number: 218252201
The Screw is an OEM replacement part for Frigidaire refrigerators. This small but essential component is used to secure various parts of the appliance, such as panels, brackets, or internal fixtures, ensuring the refrigerator's structural integrity and proper operation.
Over time, screws may become loose, stripped, or corroded due to regular use, environmental factors, or maintenance work. A damaged or missing screw can lead to misaligned parts or reduced stability of the appliance.
Symptoms of a bad or missing screw include:
- Loose or wobbly components within the refrigerator
- Panels or fixtures coming apart or misaligned
- Difficulty securing parts during maintenance or repair
- Rattling or unusual noises during operation
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Door racks/door stop broken. Jennifer S. • Lincoln , NE • December 13, 2020
I wasn’t sure where I could get parts for the fridge, Google brought me here. Super easy to look up model #’s and locate parts by type/location with the appliance map. I needed to change the racks and the doorstop. The racks were super simple. I would have succeeded with the doorstop too, but the holes at the bottom are stripped and the doorstop wasn’t secured correctly in the first place. So that’s frustrating, but appliance parts pros were easy to use, parts came quickly and The video from...
Read more
More
$11.45
- Compare At:
-
$12.84
- You Save:
-
$1.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 297272500
This replacement door handle restores a secure, comfortable grip for opening and closing your appliance door. Replace a cracked or loose handle to keep everyday use safe and convenient when the original is damaged or missing.
- Provides the handhold used to open and close the door
- Replaces cracked, broken, or missing handles to restore normal operation
- Addresses a wobbly/loose handle or stripped mounting points
- Common symptoms: handle broken, loose, or difficult to grip; trouble opening the door
What's included: 1 door handle Installation notes:
- Disconnect power before servicing
- Support the door while removing and installing the handle
- Use the correct screwdriver; transfer any screw caps/end covers as needed and reuse original fasteners if applicable
- Tighten mounting screws evenly; do not overtighten, and ensure the handle is secure and aligned
Do-It-Yourself Stories from Customers like You
Broken door handle Eddie C. • Hornbeak , TN • December 25, 2015
Replaced handle
Read more
More
$60.55
- Compare At:
-
$72.05
- You Save:
-
$11.50
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303305677
Includes service line.
Do-It-Yourself Stories from Customers like You
Freezer would not go below 32°f. James L. • Port Saint Lucie , FL • February 23, 2018
Had a friend who is an appliance repair tech. Replace the evaporator, the heater coil, and the filter/drier. Parts were soldered together and the compressor was put under vacuum. Then, charged with 5 oz. of refrigerant. The freezer works great now!
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Frigidaire part
By: Frigidaire
Part Number: 241559801
This refrigerator light socket holds and powers the interior bulb so you can clearly see inside. Replace a cracked, heat-damaged, or loose socket to restore reliable illumination when the interior light won't work or flickers.
- Provides the electrical connection and mounting point for the compartment light bulb
- Fixes symptoms such as no interior light with a known-good bulb
- Addresses intermittent flickering when the door is opened or closed
- Helps resolve visible charring, melting, or broken contacts on the socket
- Corrects a loose bulb that won't stay seated or lit
What's included: 1 light socket. Install notes:
- Disconnect power to the refrigerator before servicing; remove the light lens/cover and bulb
- Note wire positions; release the old socket from its mount
- Transfer wires to the new socket one lead at a time and seat the socket fully
- Reinstall the bulb and cover; restore power and test
- Use only the bulb type and wattage specified for your model
Do-It-Yourself Stories from Customers like You
Refrigerator light was broke Shane N. • Thomasville , PA • July 09, 2016
I found your website, watched the video on how to fix it and ordered the part.
Really a simple fix. Did I mention the super Fast shipping. Amazing! Thanks
Read more
More
$54.95
- Compare At:
-
$65.39
- You Save:
-
$10.44
Genuine Frigidaire part
By: Frigidaire
Part Number: 215474201
Nylon
Do-It-Yourself Stories from Customers like You
S or 5 e ce later that changes to s or 5 y ce Amritt V. • Yorkyown , VA • October 21, 2017
Walk into the kitchen on 21 Sep. Eight year old Frigidaire refrigerator appears to be short cycling, controls are nonfunctional. Unplug it for a few minutes, plug it back in, appears to return to normal function. Return to kitchen half hour 45 minutes later it's short cycling again. Panel has codes on it (S or 5 E CE, later that changes to S or 5 Y CE). Research of codes says replace main board and control board. Not sure where this main board is. 22 Sep call appliance repair. "Soonest...
Read more
More
$13.95
- Compare At:
-
$16.46
- You Save:
-
$2.51
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303321319
The Frigidaire Touch-Up Paint is white in color in a .6 fl oz bottle. For almond order 5303321320. For black order 5303321321.
The Touch Up Paint is an OEM part for Frigidaire appliances. Whether you're dealing with scratches, chips, or other minor cosmetic damage, this touch-up paint provides an easy and effective solution for maintaining the appearance of your appliance. It's designed to adhere well to metal surfaces, offering durability and resistance to further wear and tear.
Over time, appliances can accumulate minor surface damage from regular use, cleaning, and accidental impacts. Using the Touch Up Paint not only improves the aesthetic appeal of your appliance but also helps protect exposed areas from rust and corrosion, which can extend the life of the appliance.
Symptoms of needing Touch Up Paint include:
- Visible scratches or chips on the appliance's surface.
- Areas of rust or corrosion that need to be covered after treating the rust.
- The desire to maintain or improve the appliance's appearance for aesthetic reasons or to maintain its value.
Do-It-Yourself Stories from Customers like You
Small chip in the frigereator Julia J. • Maple Grove , MN • October 03, 2015
Quick touch up. The paint worked great. Packaged with a brush like nail poliish
Read more
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Frigidaire part
By: Frigidaire
Part Number: 241710601
This replacement screw secures refrigerator components such as brackets, trims, and covers. Replace missing or stripped hardware to keep parts tight and aligned, helping eliminate rattles and restoring a solid, reliable fit.
- Fastens interior or exterior components to the cabinet or doors
- Replaces missing, rusty, or stripped hardware
- Helps reduce vibration noises from loose parts
- Restores proper fit and alignment of panels, trims, or covers
What's included: One screw Install notes:
- Disconnect power; turn off water supply if working near the dispenser or ice system
- Retain and reuse any original spacers or washers
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- Replace one fastener at a time to maintain alignment
Do-It-Yourself Stories from Customers like You
The frif door hinge went missing when I was moving into house due the removing the frig and freezer doors to fit it through the new house door Ian H. • Phenix City , AL • February 03, 2019
I ordered online to AppliancePartPros.com for the fridge door hinge and after quick delivery I spent 15 minutes to securely fit the door back on the frig.
I'm sure to do business again for parts if needed.
Read more
More
$17.95
- Compare At:
-
$21.36
- You Save:
-
$3.41
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303288971
This refrigerator crisper bin is the produce drawer that slides into the fresh food section to hold fruits and vegetables. Replacing a cracked or missing bin restores storage capacity, helps maintain proper humidity, and ensures smooth drawer operation.
- Holds produce and helps contain humidity beneath the crisper cover
- Slides on the existing rails for easy access and organization
- Restores full use of the fresh food compartment
- Common signs it's needed: cracked or split plastic, broken lip or glide, falls off tracks, sticks or won't slide smoothly, missing drawer
What's included: 1 crisper bin (drawer) Install notes:
- Unplug the refrigerator or switch off power before servicing
- Remove contents and the old bin; many drawers lift slightly to clear the stops
- Align the new bin with the tracks and slide it in until fully seated
- Handle plastic carefully and avoid forcing past the stops
Do-It-Yourself Stories from Customers like You
The crisper drawer cracked; fixing it with super glue didn't hold Patricia M. • Surprise , AZ • March 15, 2014
Had to order a new drawer. However, we then had to remove the front from the old drawer and put it on the new one. There were no instructions on how to do this, even on YouTube. We were afraid of breaking it, so it was a little scary to do. We ended up using a couple of table knifes to ease the part out.
Instructions would have made this so much easier and more pleasant!
Read more
More
$111.71
- Compare At:
-
$132.93
- You Save:
-
$21.22