Kenmore Microwave 721.62292200 (72162292200, 721 62292200) Parts

The Door Latch Spring is a genuine OEM part for LG microwaves. As a key component of the microwave, the door latch spring is responsible for providing the tension needed to securely close and latch the microwave door. It works behind the scenes to ensure a tight seal when the door is shut.

Symptoms of a bad door latch spring include:

• The microwave door not closing or latching properly 
• Gaps appearing around the door seal when shut
• Difficulty opening and closing the door

Causes of a bad door latch spring can include wear and tear over time. Exposure to excessive door slamming can also place undue stress on the spring.

This genuine LG OEM  replacement part is also compatible with Sears/Kenmore microwaves.

The Diode is an OEM replacement part for LG countertop microwave models. Located internally on circuit boards regulating magnetron function, it precisely controls the electric current flow.

Causes of a bad diode involve thermal fatigue over time putting repetitive stress on sensitive semiconductor junctions. Microwave demands may accelerate failures.

Symptoms include:

• Intermittent cooking or complete failure to energize the tube
• Error codes appearing on the control panel display
• Buzzing or humming noises emitting from internal circuitry

This OEM LG part is also compatible with Sears/Kenmore microwaves.

This holder assembly secures the locker/latch mechanism in place so the door or access panel aligns and closes properly. Replacing a cracked or missing holder restores secure engagement and smooth, reliable operation. What it does:

• Supports and positions the locker/latch mechanism
• Maintains alignment for consistent latching and closing
• Common symptoms of a failed holder: loose latch feel, misalignment, door/panel not staying closed, or visible cracks/broken mounts
• Direct-fit replacement to restore proper support

• 1 holder assembly

• Disconnect power to the appliance before servicing.
• Access the locker area and retain any screws/clips; transfer any reusable hardware from the original holder as needed.
• Align the new holder with existing mounting points and tighten screws evenly—do not overtighten.
• Test latch engagement and door/panel operation before final reassembly.

A direct-replacement circulating motor that moves air inside the refrigerator cabinet to help maintain even temperatures and consistent cooling. Replacing a worn motor restores airflow and can reduce warm spots and uneven cooling. What it does:

• Drives internal airflow to distribute cold air between compartments for more uniform temperatures.
• Restores circulation when a failed motor causes weak or no airflow.
• Common, safe-to-report symptoms: uneven cooling, warm spots in the fridge, the appliance running more than usual, or unusual humming/noise from the cabinet.
• Works with the appliance's wiring harness and mounting system to deliver continuous air movement while the cooling system runs.

• Always unplug the appliance before beginning service to avoid electric shock.
• Handle the motor and fan blades carefully to avoid bending or damage; keep fingers and tools clear of blades.
• Confirm correct connector orientation and secure mounting to prevent vibration or rubbing.
• After installing, power up briefly to verify the motor runs and the fan spins freely before reassembling panels.

This thermostat controls refrigerator temperature to help maintain proper cooling and prevent spoilage. It replaces a failed or inaccurate temperature control to restore consistent operation. What it does:

• Senses internal temperature and signals the compressor to cycle on/off
• Helps keep food at steady, safe temperatures when functioning correctly
• Commonly replaces thermostats that cause warm temperatures or inconsistent cooling
• Works as a direct replacement when matching the OEM part number

• Always disconnect power to the appliance before servicing to avoid shock or injury
• Handle the sensor and terminals carefully; avoid bending or damaging components
• Basic hand tools are typically required; follow your model's service manual for exact instructions

This magnetron is the high-voltage microwave tube that generates the microwave energy used to cook and reheat food in your oven. Replacing a failing magnetron restores heating performance when the rest of the microwave system is functioning. What it does:

• Generates microwave energy that heats food inside the oven cavity
• Common symptom: unit powers on but does not heat
• May also cause loud humming, burning smell, or arcing when failing
• Works with the oven's high-voltage circuit and waveguide to deliver even cooking

• One magnetron

• High-voltage component — disconnect power and discharge the capacitor before service
• Avoid touching terminals or the ceramic insulators; handle by mounting brackets
• Verify other high-voltage components (diode, capacitor, transformer) and seals to ensure safe operation

This printed owner's manual provides the appliance's operating instructions and basic care guidance to help you use features correctly and maintain reliable performance. Keep it for reference during normal operation and troubleshooting. What it does:

• Explains controls, basic operation and recommended maintenance
• Describes common user-facing symptoms and simple checks to try before service
• Lists safety precautions and proper cleaning/care to reduce wear
• Helps identify features and settings so you get expected performance

• No tools required; store the manual in a safe, accessible place near the appliance
• Reference your appliance model number before following guidance in the manual
• For electrical or mechanical repairs, disconnect power
• If a procedure or repair is unclear, do not attempt service beyond basic user maintenance

The Door Latch Hook is an OEM replacement part for LG microwaves. Located internally on the door frame, this metal hook secures firmly into the microwave's door latch bracket when closed. As a common wear point, the hook can experience minor warping over many years of use.

Causes of a bad door latch hook include normal wear and tear, loss of tension, or deformation from frequent door opening and closing cycles long-term.

Symptoms of a bad latch hook include:

• Door that does not close fully or completely latch in place  
• Gaps forming in the door seal when shut
• Inability to achieve a tight, solid seal around the perimeter 
• Latch hook failing to grasp the bracket securely

This OEM LG part is also compatible with Sears/Kenmore microwaves.