Kenmore Range 790.45599900 (79045599900, 790 45599900) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 316217002
Fix F1, F3, or F10 error codes and inaccurate oven temperatures with this sensor. Simple DIY replacement takes about 30 minutes with basic tools.
This part fixes the following symptoms
-
Oven is too hot
-
Oven not heating evenly
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Error code F10 Dan H. • Culver City , CA • December 27, 2019
Bought a used Frigidaire 36 inch stove. The broiler didn't come on but the burners lit and the stove worked so I made do for about 4 or 5 years with that. Then the F10 code came up and it wouldn't stop beeping until I unplugged it. I figured the electronics/circuit board was probably bad and ordered a replacement. I was confused about what part to order. The parts list includes "Control Panel" and "Clock - Timer". Turns out the control panels are the glass panel on the front of the stove...
Read more
More
$53.42
- Compare At:
-
$63.57
- You Save:
-
$10.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 318254906
Oven won't heat to temperature or heats unevenly? This bake element provides consistent heat for proper baking. Easy 15-minute DIY repair—just 2 screws.
This part fixes the following symptoms
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Broken Newton W. • Austin , TX • August 23, 2016
With my tools
Read more
More
$153.95
- Compare At:
-
$184.74
- You Save:
-
$30.79
Genuine Wci part
By: Wci
Part Number: 316538904
The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.
Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.
Symptoms of a bad Light Bulb include:
- The oven interior remains dark when the light switch is engaged.
- Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
- Completely non-functional light, which can hinder your ability to monitor cooking progress.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
The bottom heating element wasn't working in top oven Kevin Scott W. • Parker , CO • January 09, 2015
Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old...
Read more
More
$25.95
- Compare At:
-
$30.62
- You Save:
-
$4.67
Genuine Frigidaire part
By: Frigidaire
Part Number: 316555800
The Dual Element is an OEM part for Frigidaire ranges. This element features two heating zones, allowing for versatile cooking options by providing both high and low heat settings on the same burner. It ensures efficient and consistent heating, making it ideal for various cooking tasks. It contains a 9-inch, 1200-watt element and a 6-inch, 1300-watt element, combining for 2500 watts at 240 volts
Causes of a bad dual element can include electrical issues, wear and tear from regular use, or physical damage such as cracks or breaks in the heating element. These issues can lead to inconsistent heating or complete failure of the element.
Symptoms of a bad dual element include:
- Burner not heating up
- Inconsistent or uneven heating
- Element not switching between high and low heat
- Visible damage to the element
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The outer ring of the front left element would heat but the inner would not Larry G. • Flintstone , GA • December 17, 2019
Replacement of the element was relatively straightforward, but there are a couple of things to be aware of before you begin. First, turn off power to the stove at the breaker box. Allow the cooktop to raise by removing the two screws that secures it on the underside of the front edge. Open the oven door to do this. Removal of the old element is simple, just remove the two screws that secure the wide mounting bracket that holds the two front elements. Carefully turn the assembly over. To...
Read more
More
$130.49
- Compare At:
-
$155.28
- You Save:
-
$24.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304533520
The Dual Element is an OEM replacement part for Frigidaire electric ranges. This component is located on the cooktop surface and features two heating coils in one unit, one measuring 6 inches in diameter and the other 9 inches. It allows for precise control of cooking temperatures, accommodating various pot and pan sizes for more efficient cooking.
Causes of a bad dual element can include prolonged use that leads to wear and tear, electrical surges that can damage the heating element, or physical damage due to impact or mishandling. Over time, these issues can result in the element failing to heat properly or not working at all.
Symptoms of a bad dual element include:
- The element not heating up or only partially heating
- Inconsistent or fluctuating temperatures
- Visible damage, such as burns or breaks in the element
- The element not responding to temperature controls
- Sparking or unusual noises when the element is in use
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Left front burner center coil did not work Jack P. • Leesburg , FL • September 12, 2016
We are very inexperienced appliance repair people. Thus check it out first to see if we can fixit...successs. First checked to be sure it wasn't the actual switch. Did this by numbering the wires and then switching the two switches b/w the right and left front dual burners. Success, the switch was fine but kinda disappointed cause this part was less expensive. Proceeded to then order the left front dual burner. Arrived in a few days, packed well. We unplugged the appliance, as it been a...
Read more
More
$70.34
- Compare At:
-
$84.41
- You Save:
-
$14.07
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304503232
Inner door glass panel for range and wall oven doors. Replace if cracked, shattered, or slipped out of position. Installs between outer glass and oven cavity.
Do-It-Yourself Stories from Customers like You
We shattered the interior window of our oven Jason C. • Seattle , WA • December 02, 2014
I ordered this glass and used a youtube video to replace the shattered glass step-by-step. I was a bit wary of doing this work myself, but it proved to be a snap. Within an hour of finding this package on my front porch, I had the oven as good as new.
Read more
More
$81.51
- Compare At:
-
$97.00
- You Save:
-
$15.49
Genuine Frigidaire part
By: Frigidaire
Part Number: 318178110
Burner not heating? This 6-inch surface heating element restores cooktop function. DIY repair in 10-30 minutes with basic tools and simple instructions.
Do-It-Yourself Stories from Customers like You
Oven surface element went bad Shahlokh K. • Van Nuys , CA • September 21, 2014
Very easy. go online learn how to change the element step by step. order the part and you are all set. I saved $99 of labor cost.
Read more
More
$100.95
- Compare At:
-
$120.13
- You Save:
-
$19.18
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304409888
The Terminal Block Kit is an OEM part for Frigidaire appliances, typically used for connecting house power to various electrical appliances like ranges and dryers. This kit includes includes screws, nuts, and a unique terminal block. It plays a critical role in the power supply system by providing a reliable connection point for the appliance's main power cord, preventing loose connections and potential electrical hazards.
Symptoms of a bad Terminal Block Kit include:
- Signs of burning or melting at the connection points,
- Flickering power or intermittent operation of the appliance,
- A burning smell from the appliance area.
Causes of terminal block failure often involve loose connections that can lead to arcing and overheating, improper installation, or general wear and tear that degrades the integrity of the electrical contacts.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Turns out it is the control panel but the terminal block was broken as well Patricia R. • Calera , AL • April 16, 2015
We replaced the broken Terminal Block but have not yet replaced the Control Panel. Will purchase that part from you shortly.
Read more
More
$16.90
- Compare At:
-
$18.82
- You Save:
-
$1.92
Genuine Frigidaire part
By: Frigidaire
Part Number: 318255605
Broiler not heating or turning red? This broil element restores high-heat broiling. DIY-friendly repair, typically takes 10-15 minutes with basic tools.
This part fixes the following symptoms
-
Element will not heat
-
Little to no heat when broiling
-
Oven not heating evenly
See more...
Do-It-Yourself Stories from Customers like You
Broken Newton W. • Austin , TX • August 23, 2016
With my tools
Read more
More
$129.95
- Compare At:
-
$154.64
- You Save:
-
$24.69
Genuine Frigidaire part
By: Frigidaire
Part Number: 316419353
The Overlay is an OEM part for Frigidaire ranges. It is the control panel's interface layer, displaying the various functions and settings available for the range. This component is crucial for selecting and controlling the appliance's operations, ensuring user-friendly interaction with the cooking settings.
Common causes of a bad overlay include regular wear and tear, exposure to heat, or accidental damage.
Symptoms of a bad overlay include:
- Faded or illegible markings on the control panel
- Difficulty in selecting or changing settings
- Non-responsive or sticking buttons
- The overlay peeling or becoming loose
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
F 11 error code and stove/oven would not work. Lori W. • White Post , VA • March 11, 2020
Order the part from you all. Watched the video how to install, which was easy to understand. the part arrived A DAY EARLIER than we expected! How nice is that? and installed part, stove /oven works. everybody's happy.
Read more
More
$40.95
- Compare At:
-
$48.73
- You Save:
-
$7.78
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304524341
The Lens is an OEM component for Frigidaire freezers. It acts as a transparent cover and protective barrier for the freezer compartment lights. Crafted for durability and clarity, the lens avoids frost and minimizes condensation while allowing visibility inside the freezer.
Causes of a bad lens can include deep scratches or cracks developing over time from repeated wiping or exposure to chemicals like frost removers.
Symptoms of a bad freezer lens include:
- Cloudiness, fogginess, or smears inhibiting internal visibility
- Cracks or breaks compromising the protective barrier
- Distorted views make it difficult to assess food levels
- Diffused lighting with shadows instead of a clear view
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Broken lens cover for oven light Joy K. • Connelly Spg , NC • July 18, 2014
I purchased the lens cover from your on-line store. It came within the week. I was able to change the lens cover without any problems. My husband takes care of things like this for me at home, but this cover was for my mother's oven. I broke the one she had when I was cleaning her oven and changing the bulb.
Read more
More
$18.44
- Compare At:
-
$21.76
- You Save:
-
$3.32
Genuine Frigidaire part
By: Frigidaire
Part Number: 318191023
If your dual burner stays on low and won't turn off, or the small element doesn't heat, this infinite switch may need replacing. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Large element was very erratic on temperature low/high. Rodney C. • Lake Wales , FL • March 01, 2018
Replaced the infinite, dual, switch. Very good instructional video for Safety, removal * install.
Read more
More
$50.43
- Compare At:
-
$59.51
- You Save:
-
$9.08
Genuine Frigidaire part
By: Frigidaire
Part Number: 316116400
Oven light not working or saw a flash near the bulb? This light socket houses the oven bulb and is a straightforward DIY fix in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Light socket inside oven broke Linda S. • Novato , CA • June 02, 2015
Had to pull double oven and range top out from wall which involved removing the upper kitchen cabinet. Took the sheet metal off the back and had the socket swapped out in a couple of minutes. My old oven works like a charm!
Read more
More
$53.95
- Compare At:
-
$64.74
- You Save:
-
$10.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304453707
This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.
- Fastens metal or plastic parts to the cabinet/frame
- Helps maintain alignment and reduce vibration or rattling
- Direct replacement for lost, damaged, or rusted hardware
- Keeps covers and brackets safely in place
What's included: 1 screw Install notes:
- Disconnect power before servicing; for gas appliances, also shut off gas supply
- Match one-for-one with the original screw; verify length/type before installation
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- Use the correct driver bit to prevent stripping the screw head
Do-It-Yourself Stories from Customers like You
Ice dispenser not working auger not turning Roger H. • Chesapeake , VA • August 21, 2016
Replace dispenser micro switch. Also replaced broken faceplate and rusty screws. Appliance parts Pro YouTube video was helpful in diagnosis and disassembly. Parts arrived quickly.
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293830
If your range burner won't turn on or off properly, or the indicator light stays on when turned off, this infinite switch restores control. DIY repair.
Do-It-Yourself Stories from Customers like You
Burner control bad, could not tell if it was on the number Chalmer M. • Tipp City , OH • January 21, 2022
Remove front panel and replaced. Received parts fast.
Read more
More
$69.32
- Compare At:
-
$83.18
- You Save:
-
$13.86
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303288565
This truss-head machine screw secures a switch to its mounting bracket or panel. Replacing a worn or missing screw restores a solid, aligned switch fit for reliable operation.
- Fastens the switch body to a bracket or chassis panel
- Helps keep the switch aligned for consistent actuation
- Replaces stripped, corroded, or missing mounting hardware
- Common symptoms: loose or wobbly switch, misalignment, rattling or vibration around the switch area
What's included: 1 truss-head machine screw (#8-32 x 3/16) Install notes:
- Disconnect power to the appliance before servicing
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- Verify thread size and length match the original hardware
- If multiple screws secure the switch, replace them in a consistent pattern to maintain alignment
Do-It-Yourself Stories from Customers like You
My ceramic surface cooktop had a large burner that would stick in the full on setting regardless of the control position Hugh H. • Duluth , GA • August 01, 2016
I replaced the Switch for the burner. Works fine.
Read more
More
$7.31
- Compare At:
-
$12.93
- You Save:
-
$5.62