Kenmore Range 790.74403992 (79074403992, 790 74403992) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 318255006
The Heating Element is an OEM part for Frigidaire ovens and ranges. It is responsible for providing the heat necessary for baking or broiling. The element converts electrical energy into heat through resistance; this heat is then distributed throughout the oven cavity to cook or bake food evenly.
Common causes of a bad Heating Element can include visible signs of damage like blistering, bulging, or breakage. A burnout may occur when the element overheats and fails, leading to no heat production. Additionally, electrical issues like a blown fuse or faulty wiring can prevent the element from receiving power.
Symptoms of a bad Heating Element include:
- The oven does not heat up
- Uneven cooking or baking
- Longer cooking times than usual
- The element not glowing when the oven is turned on
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
My oven stopped working properly on convection roast setting was was only heating up to about 200 degrees Mark R. • Eastham , MA • May 15, 2015
One day, while trying to roast chicken on the convection roast setting, my Electrolux oven stopped heating properly. I tried the broil setting and the top electric heating element worked fine. I then tried the bake setting and found that the bottom element wasn't working at all. I Googled the problem. The info I found said that the issue was probably that the bake element needed to be replaced. It said to look for a break or burned through spot on the element. If it appeared OK, remove it...
Read more
More
$146.95
- Compare At:
-
$176.34
- You Save:
-
$29.39
Genuine Wci part
By: Wci
Part Number: 316538904
The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.
Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.
Symptoms of a bad Light Bulb include:
- The oven interior remains dark when the light switch is engaged.
- Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
- Completely non-functional light, which can hinder your ability to monitor cooking progress.
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
The bottom heating element wasn't working in top oven Kevin Scott W. • Parker , CO • January 09, 2015
Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old...
Read more
More
$23.95
- Compare At:
-
$28.74
- You Save:
-
$4.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304409888
The Terminal Block Kit is an OEM part for Frigidaire appliances, typically used for connecting house power to various electrical appliances like ranges and dryers. This kit includes includes screws, nuts, and a unique terminal block. It plays a critical role in the power supply system by providing a reliable connection point for the appliance's main power cord, preventing loose connections and potential electrical hazards.
Symptoms of a bad Terminal Block Kit include:
- Signs of burning or melting at the connection points,
- Flickering power or intermittent operation of the appliance,
- A burning smell from the appliance area.
Causes of terminal block failure often involve loose connections that can lead to arcing and overheating, improper installation, or general wear and tear that degrades the integrity of the electrical contacts.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Turns out it is the control panel but the terminal block was broken as well Patricia R. • Calera , AL • April 16, 2015
We replaced the broken Terminal Block but have not yet replaced the Control Panel. Will purchase that part from you shortly.
Read more
More
$15.95
- Compare At:
-
$18.82
- You Save:
-
$2.87
Genuine Frigidaire part
By: Frigidaire
Part Number: 318255605
The Broil Element is an OEM part for Frigidaire ovens and ranges. It is specifically designed to provide the high heat necessary for broiling food, such as meats and vegetables. Located at the top of the oven interior, the broil element radiates heat downwards, creating a high-temperature environment ideal for browning and caramelizing the exterior of dishes while locking in juices.
Over time, the broil element can burn out or become damaged due to high temperatures and frequent use.
Symptoms of a bad Broil Element include:
- Lack of heat when broiling
- Uneven cooking or browning of food
- Visible damage or breaks in the element
- No visible glow from the element during operation
This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore gas ranges.
This part fixes the following symptoms
-
Element will not heat
-
Little to no heat when broiling
-
Oven not heating evenly
See more...
Do-It-Yourself Stories from Customers like You
Broken Newton W. • Austin , TX • August 23, 2016
With my tools
Read more
More
$128.95
- Compare At:
-
$152.16
- You Save:
-
$23.21
Genuine Frigidaire part
By: Frigidaire
Part Number: 316490001
The Sensor Probe is an OEM part for Frigidaire ovens and ranges. This sensor is essential for monitoring the oven's internal temperature and communicating with the control board to maintain accurate cooking temperatures. It helps ensure that your oven heats to the desired setting and maintains consistent temperatures throughout the cooking process.
You should replace this sensor probe if it becomes faulty. Common issues that lead to a bad sensor probe include regular wear and tear, exposure to high temperatures over extended periods, or electrical failures within the sensor itself. Physical damage from accidental impacts during cleaning or maintenance can also compromise the sensor's functionality.
Symptoms of a bad sensor probe include:
- Inaccurate oven temperature readings
- Oven not reaching the set temperature
- Error codes related to temperature control
- Oven overheating or underheating
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Oven is too hot
-
Little to no heat when baking
-
Won't start
-
Oven not heating evenly
See more...
Do-It-Yourself Stories from Customers like You
Oven temperature was not consistant and varied at the same setting Robert T. • Palm Beach Gardens , FL • October 13, 2014
I replaced the probe which is a thermocouple. Naturally the connector was different from the one on the stove so I cut off the connector on the old probe and soldered it to the new probe. The cleaning of the wires and soldering them was the most time consuming activity of the repair.
My wife just tried the stove and the oven temperature read exactly as the setting.
Read more
More
$56.23
- Compare At:
-
$66.91
- You Save:
-
$10.68
Genuine Frigidaire part
By: Frigidaire
Part Number: 316116400
The Oven Light Socket is an OEM replacement part for Frigidaire electric ranges and wall ovens. It houses the bulb that illuminates the interior of the oven cavity.
Causes of a bad light socket can include a loose or broken connection due to regular use, scorched or burnt terminals from overheating, or damage from moisture.
Symptoms of a bad light socket include:
- The oven light not turning on when activated
- Flickering or intermittent bulb operation
- Signs of corrosion or oxidation around the bulb base
- Excessive heat emission from the light area
This OEM Frigidaire replacement part is also compatible with ranges and wall ovens from Electrolux, Gibson, and Kelvinator.
Do-It-Yourself Stories from Customers like You
Light socket inside oven broke Linda S. • Novato , CA • June 02, 2015
Had to pull double oven and range top out from wall which involved removing the upper kitchen cabinet. Took the sheet metal off the back and had the socket swapped out in a couple of minutes. My old oven works like a charm!
Read more
More
$51.23
- Compare At:
-
$61.48
- You Save:
-
$10.25
Genuine Frigidaire part
By: Frigidaire
Part Number: 316213500
The Cap-Burner is an OEM replacement part for Frigidaire cooktops and ranges. It is a crucial component that covers and protects the gas burner assembly, while also distributing the flame evenly for optimal cooking performance.
Symptoms of a bad Cap-Burner:
- Uneven or irregular flame patterns
- Difficulty in igniting or maintaining a steady flame
- Discoloration or warping of the cap due to excessive heat exposure
- Clogged or obstructed gas flow, leading to poor burner performance
Causes of a defective Cap-Burner can include prolonged exposure to high temperatures, impact damage, or general wear and tear over time.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore cooktops and ranges.
Do-It-Yourself Stories from Customers like You
Missing difusser plate on burners Henry H. • Aransas Pass , TX • October 06, 2014
I thought it was the burners and ordered four burners. When they arrived I thought three of them were wrong parts so I ordered three others and scheduled a return of three I had just received. I then realized it was not the burner but the diffuser plated on top of the burners. I cancelled the new order, arranged a return of the four initial burners and ordered four diffuser plated. The representatives were extremely helpful; and understanding. I was amazed adn happy that there was no...
Read more
More
$46.95
- Compare At:
-
$55.40
- You Save:
-
$8.45
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304527841
The Rocker Switch is an OEM part for Frigidaire ranges and ovens. It is responsible for turning the interior oven light on and off. The light switch allows visibility of the oven cavity for viewing food during the cooking process.
Causes can include normal wear and tear over time, exposure to heat inside the oven cavity, or accidental damage.
Symptoms of a bad oven light rocker switch include:
- The oven light failing to illuminate when the door is opened
- The light remaining on even when the door is closed
- An inconsistent or flickering oven light
- The switch itself becoming loose, cracked, or non-responsive
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
1 of the 4 burners would not ignite with its own control Shane W. • Fullerton , CA • November 15, 2022
Removed & replaced igniter switch assembly. The hardest part was figuring out how to remove the range top...look up a YouTube video with your manufacturer and model number to see how to do it.
Read more
More
$15.50
- Compare At:
-
$18.45
- You Save:
-
$2.95
Genuine Frigidaire part
By: Frigidaire
Part Number: 318394803
Has three terminals.
Do-It-Yourself Stories from Customers like You
Oven light stayed on when door was closed Robert S. • Jacksonville , IL • June 14, 2015
When trouble shooting the problem I found that the light switch housing outer lip was broken allowing the switch to push through mounting surface behind the oven door. This is a slide in range so, I proceeded to pull the range away from the counter where I could unplug the power cord. Once the power was off like located the panel on the right upper side of the unit and removed the screws to allow access to the switch. I then unplugged the switch from the wiring harness and removed the damaged...
Read more
More
$49.95
- Compare At:
-
$59.94
- You Save:
-
$9.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303288565
This truss-head machine screw secures a switch to its mounting bracket or panel. Replacing a worn or missing screw restores a solid, aligned switch fit for reliable operation.
- Fastens the switch body to a bracket or chassis panel
- Helps keep the switch aligned for consistent actuation
- Replaces stripped, corroded, or missing mounting hardware
- Common symptoms: loose or wobbly switch, misalignment, rattling or vibration around the switch area
What's included: 1 truss-head machine screw (#8-32 x 3/16) Install notes:
- Disconnect power to the appliance before servicing
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- Verify thread size and length match the original hardware
- If multiple screws secure the switch, replace them in a consistent pattern to maintain alignment
Do-It-Yourself Stories from Customers like You
My ceramic surface cooktop had a large burner that would stick in the full on setting regardless of the control position Hugh H. • Duluth , GA • August 01, 2016
I replaced the Switch for the burner. Works fine.
Read more
More
$6.95
- Compare At:
-
$12.93
- You Save:
-
$5.98
Genuine Frigidaire part
By: Frigidaire
Part Number: 316008401
Size: 3/4 inch od x 1/4 inch id.
Do-It-Yourself Stories from Customers like You
Replaced screws on oven handle and door Jason D. • Bowling Green , KY • February 14, 2016
Secured the inner and outer door together and screwed handle back in place.
Read more
More
$8.56
- Compare At:
-
$10.10
- You Save:
-
$1.54
Genuine Frigidaire part
By: Frigidaire
Part Number: 316105501
Note: Due to a factory change, the new glide may be shorter than your original. Per Factory: The original part was 19.75". The new part is 16.25" and will install and function the same.
More
$69.35
- Compare At:
-
$82.53
- You Save:
-
$13.18
Genuine Frigidaire part
By: Frigidaire
Part Number: 318053103
Length: Approx. 82 1/2"
Do-It-Yourself Stories from Customers like You
18 year old oven; works great but racks ugly/discolored and impossible to clean well enough; door seal flattened and discolored Cathryn S. • Breckenridge , CO • September 01, 2018
Bought two new racks - beautiful! Bought replacement door seal: watched simple video and installed new seal in less than 10 minutes. Extremely pleased and impressed with entire experience as a first-time customer.
Read more
More
$97.65
- Compare At:
-
$116.20
- You Save:
-
$18.55
Genuine Frigidaire part
By: Frigidaire
Part Number: 240442708
This #10-32 x 3/4-inch machine screw secures appliance components such as panels, brackets, and handles. Using the correct length and thread helps restore a snug, rattle-free hold wherever this screw is specified by the manufacturer.
- Fastens components with a #10-32 machine thread and 3/4-inch length
- Helps keep panels, trim, brackets, or handles secured and aligned
- Replaces missing, stripped, or corroded hardware
- Common signs include loose or wobbly parts, rattling, missing screws, or damaged screw heads/threads
What's included: 1 screw (#10-32 x 3/4) Install notes:
- Disconnect power before servicing; if working near a water connection, shut off the water supply
- Use the correct driver/bit and start threads by hand to avoid cross-threading
- Tighten snugly; do not overtighten to prevent stripping plastic or threads
- Reuse any model-specific washers or spacers if present
Do-It-Yourself Stories from Customers like You
Missing parts Hector R. • York , PA • December 27, 2016
Ordered parts and installed
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 316136600
This is a nut that is used in many microwave ovens. It is typically used to hold interior fan in place. A nut is a fastener that is used to hold two items together or keep one component secure against a surface. Use and time can cause the nut to become stripped, damaged, or broken. If the nut is broken, it will no longer hold the fan in the right location. The nut will need to be replaced.Before replacing this part, the microwave should be unplugged. Open the refrigerator door and remove the cover that goes over the fan. The nut can then be removed using a nut driver. Replace the other parts before using the appliance.This nut is used in microwave ovens manufactured by Crosley, Electrolux, Frigidaire, and Kenmore. It is sold as a single part. This is an authentic OEM replacement part is sourced directly from the manufacturer.
Do-It-Yourself Stories from Customers like You
Oven won't turn on, control board failure convection motor failure Jonathan O. • Lorena , TX • November 12, 2018
Everything was straight forward and easy to repair, I had an appliance tech come out and troubleshoot the repair and watched what he did and asked questions. I then ordered the parts from here and did the repairs myself and saved on having the tech make another trip out.
Read more
More
$14.44
- Compare At:
-
$17.18
- You Save:
-
$2.74
Genuine Frigidaire part
By: Frigidaire
Part Number: 318148700
This replacement igniter lights the gas in your range or wall oven. It restores dependable burner ignition so cooking starts promptly and safely when you turn the control or select a bake/broil setting.
- Generates the ignition source (spark or heat) required to light the gas at the burner
- Common symptoms of a failed igniter: burner won't light, no spark/glow, intermittent or delayed ignition
- Replacing a weak or cracked igniter helps prevent raw gas buildup and improves lighting consistency
What's included: One igniter Install notes:
- Disconnect power and shut off the gas supply before servicing
- Handle the igniter element/ceramic carefully; avoid impact and contamination
- Reuse existing mounting hardware and route leads away from heat/flame as originally installed
- After installation, restore gas and power, then test for prompt ignition and proper flame; check for leaks
Do-It-Yourself Stories from Customers like You
Needed to replace burner pan and igniter Ron W. • Indianapolis , IN • December 06, 2015
Very easy fix. Lifted off the grill and burner. Unscrewed 2 screws. Pulled the burner pan up and off. Disconnected the wire to the igniter. Used needle nosed pliers to remove the clip holding the igniter in place. Removed the gasket from the old burner pan.
Placed the new igniter in the hole of the new burner pan and slipped the old clip on the igniter to hold it in place. Then put the old gasket on the new burner pan. Then connected the igniter wire to the new igniter and put the burner pan...
Read more
More
$47.95
- Compare At:
-
$57.54
- You Save:
-
$9.59