Bosch Refrigerator B36IT800NP Parts

Fixes no water dispenser or ice maker issues. This inlet valve controls water flow to restore proper fill and prevent leaks in your refrigerator.

Fix a refrigerator that won't cool or runs constantly with this compressor. Circulates refrigerant through the cooling system to maintain proper temperatures.

If your refrigerator isn't cooling or runs constantly, the compressor may have failed. This critical component pressurizes refrigerant through the system.

Secures panels, trim, and internal components in your refrigerator. Replace if the original clip is cracked, broken, or missing to restore proper fit.

Small metal or plastic washer used in upright freezers. Installs between mounting surfaces to provide spacing, reduce vibration, or seal connections. Replace if missing, cracked, or corroded to ensure proper assembly and prevent component damage.

A replacement water inlet valve assembly that controls water entry to the appliance for proper fill cycles and normal operation. Restores reliable filling and helps stop unwanted leaks or no-fill conditions. What it does

• Opens and closes to let water into the unit during fill cycles.
• Helps maintain correct water level for washing and rinsing.
• Can stop water flow when the cycle is finished or if a fault is detected.
• Commonly associated with symptoms such as no water fill, slow fill, unit not starting due to low water, or visible leaks at the valve.

• Disconnect power and shut off the water supply before starting any repair.
• Handle electrical connections and hose fittings carefully; replace any damaged clamps or seals.

This shock absorber cushions and controls dishwasher door movement to reduce slamming and improve closing action. It helps protect the door and cabinet from impact and can reduce noise during operation. What it does:

• Dampens and slows the dishwasher door as it opens and closes
• Helps prevent sudden drops or slamming that can damage the door or hinges
• Reduces vibration and noise caused by uncontrolled door movement
• Restores smoother, more controlled door operation when the original shock wears out

• One shock absorber

• Disconnect power to the appliance before beginning any repair
• Remove the dishwasher door panels or access panels to reach the mounting points
• Support the door during removal/installation to prevent it from falling or binding
• Use the OEM mounting hardware and verify secure attachment and correct alignment after installation

A single mounting screw used to secure appliance panels and components. This genuine replacement restores proper fastening to prevent loose trim, panels, or brackets and helps stop rattles or movement. What it does:

• Fastens panels, trim pieces, or internal brackets to the appliance frame
• Restores secure attachment where a screw is stripped, lost, or damaged
• Reduces vibration-related noise from loose panels or parts
• Works with the original threads and mounting points for correct fit

• One mounting screw

• Use the correct driver to avoid stripping the screw head
• Tighten until snug; do not overtighten to prevent damage to threads or panels
• Disconnect power and follow appliance safety guidelines before working on the unit
• If replacing multiple fasteners, verify all similar screws are the correct length and type

The Sheet is an OEM part for Bosch refrigerators. It forms the interior lining of the machine compartment, which houses the refrigeration system and other essential components.

This sheet acts as a protective barrier, shielding the internal components from potential damage and ensuring their proper functioning.

Causes of a bad sheet can include wear and tear over time, accidental damage during maintenance or repair work, or exposure to moisture or extreme temperatures that can degrade the material.

Symptoms of a bad sheet include:

• Reduced cooling efficiency
• Increased energy consumption
• Condensation buildup inside the refrigerator
• Unusual noises from the machine compartment

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Refrigerator running warm or loud? This insulation pad restores thermal protection, reduces heat transfer, and dampens noise. Easy DIY fix.

If your refrigerator isn't cooling properly or cycles erratically, a faulty temperature sensor is often the cause. This NTC thermistor restores regulation.

Freezer not defrosting or excessive frost buildup? This evaporator defrost heater melts ice during defrost cycles to restore proper cooling and airflow.

Protective housing cover for refrigerator internal components. Shields parts from debris and moisture. Replace when cracked, broken, or missing.

This fixture is the OEM replacement mounting piece designed to secure internal components and restore proper alignment and support. It helps keep parts stable for reliable operation and reduces noise caused by loose hardware. What it does:

• Secures internal panels or components to the appliance frame to prevent movement
• Restores proper alignment to reduce rubbing, vibration, or rattling noises
• Provides the correct mounting point for linked components to operate as intended
• Replaces damaged or missing fixtures that can cause part instability or failure

• Recommended for users comfortable with basic disassembly; unplug the appliance before starting.
• Keep fasteners and surrounding parts organized during removal to ensure correct reassembly.
• Inspect mating surfaces for damage or wear; replace adjacent hardware if needed.

This is a small wheel designed for use in a refrigerator or freezer, typically mounted on a shelf, drawer, or rack to allow smooth sliding in and out. It helps support the weight of stored items while enabling easy access. Replace this wheel if it is cracked, broken, or no longer rolling freely, causing drawers or racks to stick or sit unevenly.

This is an electrical on/off switch used to control power to an appliance circuit. It replaces a failed switch so controls respond normally and the appliance can be powered on and off safely. What it does

• Opens and closes an electrical circuit to enable or disable appliance power or a specific control function
• Commonly replaces a worn, stuck, or unresponsive switch that prevents controls or lights from operating
• Can resolve symptoms like no power to a control, intermittent operation, or a button that won't actuate
• Designed to mate with the appliance's existing wiring and mounting points

• One electrical on/off switch

• Disconnect power to the appliance at the breaker or unplug before working on wiring
• Verify proper wire locations and secure all terminal connections; replace only with the exact part specified by the manufacturer
• Handle the part carefully to avoid bending terminals or damaging the switch actuator