Bosch Dishwasher DF481700F Parts

The Turbidity Sensor is an OEM part for Bosch dishwashers. It is a component located inside the dishwasher that plays a key role in monitoring water quality during each wash cycle. The turbidity sensor detects small food particles and residue in the water, relaying this information to adjust water temperatures, spray pressures, and cycle times accordingly to achieve optimal cleaning results.

Causes of failure could be normal wear and tear over time, mineral buildup affecting the sensor's ability to read water quality accurately, or damage from electrical faults.

Symptoms of a bad turbidity sensor include:

• Inconsistent or inadequate cleaning performance
• Extended cycle times
• Error codes displayed related to water issues

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Cover is an OEM part for Bosch dishwashers. It provides a protective barrier that shields internal components from damage and extends the life of the appliance.

The cover is exposed to heat, humidity, and debris during each wash cycle. Over time and repeated use, these conditions can cause cracks, warping or breakdown of the protective plastic material.

Causes of a bad cover include normal wear and tear, accidental dents or punctures, and exposure to excess heat or chemicals.

Symptoms of a cover needing replacement include:

• Visible cracks or holes that compromise the barrier
• Loose or sagging fit that allows internals to be exposed
• Warping or melting of the protective plastic shield

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Upper rack tine insert for dishwashers. Supports delicate dishes and glassware in the top rack. Replace if cracked, broken, or missing to prevent damage.

This is a fan motor assembly used in the dishwasher's drying system, typically associated with a zeolite-based drying mechanism. It circulates air through the drying system to help remove moisture from dishes after the wash cycle. Replace this fan motor if your dishwasher is no longer drying dishes effectively, you hear unusual noises during the drying phase, or the fan fails to run.

Dishwasher not filling with water or leaking? The aquastop valve prevents floods by shutting off water supply. Moderate DIY repair in 30-60 minutes.

Seals the sides and top of your dishwasher tub to prevent leaks and contain steam. Replace when worn or cracked to restore watertight operation.

The Sealing is an OEM part for Bosch dishwashers. It serves as a protective barrier between the control panel and the internal components of the dishwasher, preventing moisture and dust from entering and causing damage.

A bad sealing can occur due to wear and tear, exposure to moisture, or accidental damage. Signs of a faulty sealing include water seeping into the control panel, visible cracks or gaps, or a loose fit.

Symptoms of a bad sealing include:

• Water or moisture around the control panel
• Visible cracks or gaps in the sealing
• A loose or ill-fitting seal

Replace your damaged or worn-out sealing with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Heat Pump is an OEM part for Bosch dishwashers. This pump works to circulate air within the dishwasher during the drying cycle, helping to remove moisture from washed dishes.

Causes of a bad heat pump can include a malfunctioning heating element that fails to produce warm air, broken or misaligned fan blades that don't circulate air properly, or worn out motor that no longer operates effectively.

Symptoms of a bad heat pump include:

• Dishes remaining wet or damp after completion of the full cycle
• Extended or insufficient drying times
• Strange noises coming from the area of the heat pump
• Error codes or function indicator lights related to the heat pump

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Auxiliary Tool is an OEM part for Bosch dishwashers. This specialized tool is designed to assist with the removal and replacement of the metal nut found on the zeolite container or filter housing.

Proper maintenance such as routinely replacing the zeolite container is important for keeping a Bosch dishwasher operating at peak performance. The zeolite acts as a water softener that reduces water hardness and aids in the cleaning process. Over time, the zeolite container will need replacement as it collects soil and contaminants.

Causes of needing to replace the metal nut can include wear and tear from repeated container changes or damage that prevents the nut from sealing properly.

Symptoms of a bad nut include:

• Inability to securely tighten the zeolite container
• Leaks developing from the filter housing area
• Reduced cleaning ability due to hard water issues

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Seals the sump area to prevent leaks and ensure proper water circulation and drainage. Replace if cracked, warped, or missing. Verify fit with your model.

Channels wastewater from your dishwasher to the household drain. Replace if brittle, cracked, clogged, or leaking to restore proper drainage.

Door pulley rope for dishwasher door latch mechanism. Replace if frayed, broken, or snapped from repeated use. Includes rope and plastic retainer.

Detergent releasing too early or leaking from the dispenser? This seal creates a watertight barrier to prevent premature dissolution. Easy 10-minute fix.

This replacement screw secures panels, brackets, and internal parts in your appliance for a tight, rattle-free fit. Use it to replace lost, stripped, or corroded hardware and keep components properly fastened.

• Fastens components to the appliance frame or assemblies
• Replaces a missing, stripped, or rusted original screw
• Helps reduce rattling or vibration from loose hardware
• Restores proper alignment of panels or brackets

• Disconnect power and shut off water before servicing
• Refer to your model's parts diagram to locate and place
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening

Dishwasher door seal creates a watertight barrier around the tub opening. Replace if you notice leaks, moisture escaping, or visible cracks. Confirm fit with your model number.

The Cover is an OEM part for Bosch dishwashers. It serves as a protective barrier over vulnerable inner components. The cover helps prevent damage from spills, shields electronics from moisture, and blocks access to moving parts for safety.

Causes of a bad cover can be normal wear and tear, repeated impact damage, or improper handling during repairs.

Symptoms of a bad cover include:

• Cracks, holes or other physical damage
• Warping or deformation over time
• Loose or improper fit that exposes internal parts

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.