Kenmore Refrigerator 106.41522500 (10641522500, 106 41522500) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2255431B
Color: Black
Do-It-Yourself Stories from Customers like You
Exterior ice & water dispenser parts we discolored mainly due to lime scale Tamara M. • Saint Charles , MO • July 16, 2016
Even though the refrigerator is 13 years old, I was able to find replacement parts on your site. The DIY video provided on-line for each of the four parts ordered was very helpful ; even though my refrigerator wasn't exactly like the one in the video, it was still helpful. I'm not usually the DIY type- but with your help the repair was very successful! Thank you !
Read more
More
$56.40
- Compare At:
-
$67.12
- You Save:
-
$10.72
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2198608
The Whirlpool latch spring is an OEM replacement part responsible for securing the ice container or bin in place on a refrigerator. Its main function is to provide tension and support to the ice container latch, allowing it to engage and disengage properly. When the ice container is inserted into the refrigerator's ice compartment, the latch spring ensures that it securely locks in place, preventing accidental spillage of ice.
Causes of a bad latch spring can include metal fatigue from repeated use, rust or corrosion from exposure to moisture, or physical damage from accidental impacts.
Symptoms of a bad latch spring include:
- The ice container not staying in place and sliding out of position
- Difficulty in properly attaching or detaching the ice container from the refrigerator
- The ice container feeling loose or wobbly when inside the ice compartment
- The ice container not aligning correctly with the ice dispenser or auger
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Lower ice bin broken Dennis B. • Wichita Falls , TX • March 30, 2020
Easy to remove the metal parts from the old bin. The only problem was that the screw that holds the adapter has red thread locker and screwdriver rounded off the head of the screw. Drilled the screw and heated the screw to loosen the thread locker and used an ease out to remove the screw.
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489478
Size: 8 x 1/2 ab.
Do-It-Yourself Stories from Customers like You
Wanted to update wood paneled compactor Julie S. • San Antonio , TX • December 09, 2014
Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2196483
The Shelf Stud is an OEM part for Whirlpool refrigerators. It serves as a support peg that holds the refrigerator shelves in place, ensuring they remain stable and properly positioned.
Causes of a bad shelf stud can include wear and tear from regular use, accidental impact that causes the stud to break, or repeated removal and reinstallation of shelves leading to loosening or damage.
Symptoms of a bad shelf stud include:
- Shelves not staying securely in place
- Shelves tilting or collapsing
- Visible cracks or damage to the stud
- Difficulty in inserting or removing shelves
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This is a rear stud with a screw. For the front stud with screw use part number W11223328. For studs with no screw use kit part number 4388538.
Do-It-Yourself Stories from Customers like You
Broken shelf and drawer. Regina M. • Yardley , PA • November 10, 2017
Myself
Read more
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2155013
Clip for bottom grill. If your original clip is riveted, order screw WP489478.
Do-It-Yourself Stories from Customers like You
The water pressure from the door was a trickle and ice cubes we're hollow Patricia R. • Shoreline , WA • June 18, 2020
Did research on line and figured it was valve inlet part. The helpful video you provide made me realize that it was an easy job to complete. Yes it was easy because of the video and the part was exactly what was needed. We saved money by doing it ourselves. So while we were on the order site we ordered the brackets for the front grill. The old ones snapped off a long time ago. Again helpful video on your site on how to do the replacement ourselves. We now have water pressure back and that...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2223752
Mounts on the bottom of the freezer door.
Do-It-Yourself Stories from Customers like You
Door clicking, door not closing easily Mike K. • Broadview Heights , OH • January 27, 2020
Replaced both sets of door cams on my Kenmore Elite Refrigerator. The most important thing to know is that you DO NOT have to remove the doors from the refrigerator to replace BOTH sets of cams. You just have to remove the lower grill which is a snap fit (I also turned off the water and unplugged the unit). My fridge has an ice and water dispenser where the water and electrical lines go through the cams on the left side. Be sure to order the correct parts as the cam holes on the freezer side...
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4387911
This push-button door switch senses when your refrigerator door opens and closes to control the interior light. Replace a worn or stuck switch to restore reliable lighting and proper on/off operation when the door moves. What it does:
- Turns the interior light on when the door opens and off when it closes
- Common fix for a light that won't turn on with the door open
- Resolves lights that stay on continuously with the door closed
- Addresses intermittent lighting from a sticking or damaged plunger
What's included:
Install notes:
- Disconnect power to the refrigerator before servicing
- Carefully pry the old switch from the liner; protect the surface to avoid damage
- Transfer wires to the new switch one at a time to maintain correct connections
- Press the new switch fully into place and restore power to test operation
Do-It-Yourself Stories from Customers like You
A failed freezer door switch was causing the fridge to display that the door was open when it was not this caused it to beep at random Kara H. • Charleston , SC • March 08, 2016
We actually were able to determine that one of the freezer switches was bad and taped it down for about 3 days. The beeping stopped. Our fridge has two freezer switches and one fridge side switch. I ordered all three from these guys. They were cheaper than Whirlpool by about $20 for parts and about $15 for shipping. The part numbers had superseded too many times to count, usually that doesn't matter but in this case it did. The new parts were just slightly bigger than the old parts AND...
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8281196
The Screw is an OEM part for Whirlpool refrigerators. This screw secures the refrigerator door hinge in place, allowing the door operates smoothly and seals properly.
Over time, screws can become loose or go missing during repairs or adjustments, which can lead to a misaligned door, compromised sealing, and increased energy consumption.
Symptoms of a bad screw include:
- The refrigerator door seems misaligned or does not close properly.
- Increased effort needed to open or close the door.
- Unusual gaps around the door seal when closed.
- The door might squeak or make other noises during operation.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Missing a hinge and hinge cover. James H. • Killeen , TX • August 01, 2020
As soon as the parts arrived, installed them seamlessly. Thank you.
Read more
More
$9.95
- Compare At:
-
$11.74
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: 72032
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$17.76
- Compare At:
-
$21.13
- You Save:
-
$3.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10185438
This ice maker cover fits over the ice maker head to protect the control module and moving parts inside your freezer. Replacing a cracked or missing cover helps prevent frost intrusion and restores a clean, finished look.
- Shields the ice maker mechanism from debris and moisture
- Helps maintain airflow to reduce frost at the ice maker face
- Replaces a cracked, warped, or missing cover with broken tabs
- Can help address exposed gears/wiring or rattling from a loose cover
What's included: 1 ice maker cover Install notes:
- Disconnect power to the refrigerator before servicing
- Remove the ice bin to access the front of the ice maker
- Release retaining tabs or screws and remove the old cover
- Align and snap the new cover fully into place; verify it's secure and clear of moving parts
Also known as: Cover-I.M. (ice maker cover)
Do-It-Yourself Stories from Customers like You
Broken ice maker in my 10 year old refrigerator Phil S. • Austin , TX • May 09, 2015
Ordered new ice maker and some additional parts. They were on my porch the next morning. It took about 30 minutes to install and had ice by mid afternoon.
Read more
More
$55.37
- Compare At:
-
$66.44
- You Save:
-
$11.07
Genuine Whirlpool part
By: Whirlpool
Part Number: W10136387A
Color: clear. It measures about 6 inches wide by 3-1/2 inches high by 15 inches deep.
Do-It-Yourself Stories from Customers like You
Missing egg case for frig Laura W. • Coupeville , WA • June 19, 2016
I got online and found the egg carton case for my refrigerator - ordered it - it arrived and was exactly what I wanted. Online shopping is AMAZING!!
Read more
More
$11.34
- Compare At:
-
$13.49
- You Save:
-
$2.15
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2212322
This icemaker mounting bracket secures the ice maker to the freezer wall, keeping the assembly level and correctly aligned with the fill tube. Replacing a bent or broken bracket helps restore stable ice production and reduces rattling or leaks.
- Supports and stabilizes the ice maker assembly inside the freezer
- Maintains proper alignment with the fill tube and ejector mechanism
- Helps prevent vibration, rattling, and water overspray that can cause ice clumps or cubes missing the bin
- Common signs include a loose or sagging ice maker, crooked alignment, noise during harvest, or water/ice buildup near the fill area
What's included: 1 mounting bracket Install notes:
- Unplug the refrigerator and shut off the water supply before servicing
- Remove the ice bin and ice maker to access; transfer and reuse existing screws to install the new bracket in the factory holes
- Level the ice maker and confirm fill-tube alignment before tightening fasteners
- Restore power and water; check for leaks and normal ice production
Do-It-Yourself Stories from Customers like You
Ice maker failed James T. • Summerville , SC • June 02, 2015
Purchased a new ice maker, and mounting bracket, installed them, plugged in the ice maker. One note of advice. Put your old ice maker and ALL extra parts in a safe place where you can find them, but your significant other cannot. Why? Because if your significant finds them he/she may dispose of them and you will need them to install your new ice maker, I have learned the hard way.
Read more
More
$55.95
- Compare At:
-
$66.58
- You Save:
-
$10.63
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2220377
This refrigerator air baffle is the internal vane that directs cold airflow from the freezer into the fresh food compartment. Replacing a broken or missing baffle helps restore even cooling and reduce random warm spots or items freezing near the vent.
- Directs and regulates airflow between freezer and refrigerator sections
- Helps maintain stable, even temperatures across shelves
- Diffuses direct cold air to minimize food freezing near the outlet
- Failure symptoms can include uneven cooling, weak airflow, cold spots, or rattling at the vent
What's included: One air baffle only Install notes:
- Disconnect power before service and wear cut-resistant gloves
- Access the interior vent/diffuser area; remove the cover or grille as needed
- Note the original baffle's orientation; seat the new baffle securely without obstructing the damper
- Reinstall covers, restore power, and allow temperatures to stabilize
More
$178.95
- Compare At:
-
$212.95
- You Save:
-
$34.00
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196557
This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.
- Fastens brackets, panels, trim, or components to the appliance chassis
- Helps correct loose or missing hardware after vibration or service
- Replaces stripped, rusted, or broken screws
- Can reduce rattling noises or misaligned parts caused by missing fasteners
What's included: One screw Install notes:
- Disconnect power; for gas appliances, also shut off the gas supply
- Support the part being fastened; start threads by hand to avoid cross-threading
- Use the correct driver size; tighten snugly without overtightening
- Replace hardware with the exact part number to ensure proper fit
Do-It-Yourself Stories from Customers like You
Water dispenser was no longer working Kelly W. • Houston , TX • January 24, 2017
After being told by a service repairman that it would cost me close to $200 to repair, I resolved to just not use the dispenser. After about a year, I had decided that I wanted to repair it and would look at the options myself. At the least, I could figure out which parts were needed to repair it and have them on hand for a service guy if I determined I could not do the job myself. The more I studied it, the more I felt confident that I could do it, and sure enough, when the part arrived - a...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206670T
Used to prevent water from overflowing from the dispenser on the freezer door. Color: Biscuit. It measures about 10 inches wide by 3 inches deep. For black order WP2206670B. For white order WP2206670W.
Do-It-Yourself Stories from Customers like You
Noisy fan and grungy ice/water handles Andrew B. • Port Jefferson Station , NY • June 26, 2015
Your videos showing disassembly were invaluable. New parts fit perfect. Took awhile to clean surrounding parts before reinstalling new parts... but now 10 year old fridge looks like new!
Read more
More
$56.95
- Compare At:
-
$67.20
- You Save:
-
$10.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8281163
This replacement screw secures panels, brackets, and internal components within your appliance. Replacing a missing or damaged fastener restores a tight fit, reduces vibration and noise, and helps keep parts properly aligned during operation.
- Fastens panels, trim, brackets, or internal components to the chassis
- Maintains proper alignment and stability during normal use
- Replaces missing, rusted, or stripped hardware
- Common symptoms: loose or rattling panels, vibration, difficulty fastening, or a visibly missing screw
What's included: 1 screw Installation notes:
- Disconnect power; for gas appliances, also shut off the gas supply
- Match length and thread to the original; replace one-for-one in the same location
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- If the receiving hole is stripped, repair threads or replace the clip/nut before installing
Do-It-Yourself Stories from Customers like You
Whirlpool wtw5000dw1 top loader door would not lock, spin cycle would not function John C. • Cornelia , GA • December 24, 2021
Replaced door latch and switch. Parts are plastic so you must know what you are doing to avoid breaking new parts. Videos were hard to find for my model - eventually I found a video that addressed a different problem but required disassembly of a washer cabinet similar to mine. I removed the control panel using a putty knife and unplugged the wire to the latch switch. Then I remove 3 screws securing the washer's top panel to the back panel. Using a rubber mallet, I gently knocked the top panel...
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51