Kenmore Refrigerator 106.50027004 (10650027004, 106 50027004) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10845583
This track is the replacement rack guide that supports and guides a dishwasher or oven rack so it slides smoothly in and out. It restores proper rack alignment and prevents the rack from sticking or tipping. What it does:
- Provides a smooth sliding surface for a rack to roll or glide along
- Restores proper rack alignment to prevent tipping and rubbing
- Replaces worn, cracked, or broken guides that cause sticking or noisy operation
- Compatible with factory mounting points to maintain original movement
What's included: One track replacement part Install notes:
- Disconnect power and water (if applicable) before servicing the appliance
- Remove the affected rack and any retaining clips or screws to replace the track
- Tighten fasteners securely and test rack movement after installation
More
$60.70
- Compare At:
-
$72.84
- You Save:
-
$12.14
Genuine Whirlpool part
By: Whirlpool
Part Number: 4388358
Includes both right and left hand sides.
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Whirlpool part
By: Whirlpool
Part Number: 606755
$46.95
- Compare At:
-
$55.40
- You Save:
-
$8.45
Genuine Whirlpool part
By: Whirlpool
Part Number: W11544659
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Whirlpool part
By: Whirlpool
Part Number: W11751592
$11.97
- Compare At:
-
$13.30
- You Save:
-
$1.33
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2154473
$15.95
- Compare At:
-
$19.14
- You Save:
-
$3.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2205813
$4.47
- Compare At:
-
$5.32
- You Save:
-
$0.85
Genuine Whirlpool part
By: Whirlpool
Part Number: W10683556
$12.51
- Compare At:
-
$14.89
- You Save:
-
$2.38
Genuine Whirlpool part
By: Whirlpool
Part Number: W10822259
The condenser fan motor is an OEM part for Whirlpool refrigerators. It plays a vital role in circulating refrigerant through the condenser coils, facilitating heat exchange and maintaining the refrigerator's cooling efficiency.
Over time, the motor-condenser can wear out or fail due to electrical issues, mechanical wear, or blockages in the condenser system. A malfunctioning motor can compromise the refrigerator's cooling performance, leading to temperature fluctuations and increased energy consumption.
Symptoms of a bad Motor-Condenser include:
- The refrigerator not cooling properly
- Unusual noises coming from the back of the refrigerator
- The compressor running continuously
- Increased energy bills due to inefficient operation
- Overheating of the refrigerator
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Fridge too warm
-
Freezer section too warm
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Refrigerator not cold enough Damon P. • Dubois , PA • May 17, 2014
Replaced compressor fan. the video on the website showed step by step. very easy and it fixed the problem.
Read more
More
$140.95
- Compare At:
-
$169.14
- You Save:
-
$28.19
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 8201799
Kit includes relay, overload, cover and instructions.
Do-It-Yourself Stories from Customers like You
Clicking relay compressor not running not cooling David T. • Glen Burnie , MD • September 01, 2014
The Compressor Start Device Kit fixed it. Very easy to do. Only hang up was a part number substitution that was mildly confusing, but it checked out just fine. We were afraid the compressor was bad, but were willing to try this first.
Read more
More
$79.95
- Compare At:
-
$94.34
- You Save:
-
$14.39
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2155590
This fan motor retainer secures the refrigerator's fan motor to its mounting bracket or shroud, reducing vibration and keeping the fan aligned so air circulates properly for consistent cooling.
- Secures the fan motor to its bracket or shroud
- Maintains proper fan alignment and clearance for consistent airflow
- Helps reduce vibration, buzzing, or rattling from a loose motor
- A worn or missing retainer may present as scraping fan noises or uneven airflow
What's included: 1 fan motor retainer
- Disconnect power to the refrigerator before servicing; allow moving parts to stop and wear cut-resistant gloves
- Access the fan area per your model
- Transfer the motor into the new retainer and reinstall using existing hardware as required
- Ensure the fan blade spins freely and clears the shroud before restoring power
Do-It-Yourself Stories from Customers like You
Evaporate motor went out on my Whirlpool refrigerator freezing cold at the bottom but warm on top Toan N. • Anaheim , CA • June 24, 2018
When I first found out that the evaporator fan doesn't work, I went to a local home appliances store to buy one , cost me $40 , real easy to replace it and it solves the main problem , but this evaporator motor was making some loud noise every now and then , especially when we open the door too often. Then I ordered another one from Repair Clinic , this one is even worst , making a loud hum noise constantly, I had to return it. My wife really wants to buy another refrigerator but I don't...
Read more
More
$4.93
- Compare At:
-
$5.42
- You Save:
-
$0.49
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 1119787
White.
Do-It-Yourself Stories from Customers like You
The seal on the door of the refigerator was damaged also the hinge cap needed replacing as it was cracked Michael S. • Fredericksburg , VA • January 20, 2016
I took the new seal out of it's packaging and used a blowdryer on low heat to soften up the seal so that the crease from shipping (it was folded to ship) disappeared. Next I took the refrigerator door off, removed the old seal, & cleaned the area where the new seal would be applied. Following the video on the Appliance Pro Parts website, I re-installed the new seal and put the door back on. Last step was to snap on the new hinge cap I ordered. The video online was easy to follow and this...
Read more
More
$16.36
- Compare At:
-
$19.47
- You Save:
-
$3.11
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10278732
Do-It-Yourself Stories from Customers like You
The ice maker would not shut off making ice even when the bin was full Kevin M. • Citrus Heights , CA • November 17, 2017
Spoke with a representive that diagnosed the problem as a bad control board. After receiving the new control board, I was able to easily perform the replacement by watching the step-by-step instructional video on the website. It is now functioning normally.
Read more
More
$47.95
- Compare At:
-
$56.58
- You Save:
-
$8.63
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10278731
Do-It-Yourself Stories from Customers like You
Crush ice maker blade bent Melton R. • Hampton , VA • December 27, 2014
I removed the shaft from ice bucket removed the blade below and pulled off bent blade. Put new blade in the bent blade spot put lower blade back on screwed it back into Ice bucket replaced in fridge and now it works perfectly without hanging up.
Read more
More
$47.95
- Compare At:
-
$57.06
- You Save:
-
$9.11
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 1119021
Rod retainer clip secures a support rod or shaft to keep moving parts aligned and stable during operation. Replacing a worn or broken clip prevents rattling, binding, or components falling out and helps restore proper mechanical function. What it does:
- Holds a support rod or shaft in place to maintain alignment of moving components.
- Prevents rods from sliding out or shifting, which can cause rattling, binding, or misalignment.
- Replace if the clip is bent, cracked, corroded, or no longer grips the rod securely.
- Common symptom: loose or misaligned parts, unusual noises, or components that detach during use.
What's included: One rod retainer clip. Install notes:
- Disconnect power (unplug or shut off breaker) before servicing the appliance.
- Access may require removing panels, covers, or nearby components—follow the OEM service manual.
- Remove the old clip and carefully press or snap the replacement into place; avoid over-bending the clip.
More
$7.95
- Compare At:
-
$9.38
- You Save:
-
$1.43
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2209697
A replacement lower hinge shim that helps level and align a refrigerator door for smoother opening and a better seal. Use when a door sits unevenly, rubs the cabinet, or doesn't close flush. What it does
- Provides a thin, durable spacer under the bottom hinge to correct door tilt and height
- Restores proper door alignment to improve sealing and reduce rubbing or binding
- Helps stop uneven wear on gasket edges caused by a misaligned door
- Works with the existing hinge assembly; often used during hinge replacement or adjustment
What's included One bottom hinge shim Install notes
- Disconnect power and remove food from the door area before starting work
- Support the door while loosening or removing hinge fasteners to prevent it from falling
- Install the shim under the bottom hinge plate as needed, then re-torque fasteners and check door alignment
Do-It-Yourself Stories from Customers like You
Missing hinges to hold the door up Sandra C. • Gardena , CA • June 05, 2016
Found the parts in the diagram of my fridge and simply installed it very easy
Read more
More
$44.62
- Compare At:
-
$52.65
- You Save:
-
$8.03
Out Of Stock
Usually ships within 4 - 14 days