Kenmore Refrigerator 106.52554100 (10652554100, 106 52554100) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 799344
Color: White. Size: 1 qt. can. Acrylic appliance paint.
More
$174.30
- Compare At:
-
$207.42
- You Save:
-
$33.12
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 876370
Foam insulation panel that fits inside refrigerator doors to maintain temperature efficiency. Replace if cracked, compressed, or missing.
More
$94.18
- Compare At:
-
$103.60
- You Save:
-
$9.42
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 940014
$13.73
- Compare At:
-
$16.20
- You Save:
-
$2.47
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1108439
Secures the drain extension tube in your refrigerator's defrost system. Replace if clip is broken, cracked, or missing to properly hold drain tubing in place.
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2212240
Refrigerator cover installs to protect internal components or provide a finished look. Replace if cracked, broken, or missing for proper coverage.
More
$101.95
- Compare At:
-
$120.30
- You Save:
-
$18.35
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 8281160
Mounting screw for refrigerator assembly and component installation. Replace missing, stripped, or damaged screws to secure panels, shelves, or hardware.
More
$10.58
- Compare At:
-
$11.64
- You Save:
-
$1.06
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 2304904
Support frame for refrigerators. Mounts internally to provide structural support. Replace if cracked, broken, or damaged to restore proper alignment.
More
$129.68
- Compare At:
-
$154.32
- You Save:
-
$24.64
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 2305374
This is a metal mounting rail used to secure the compressor unit to the base of the refrigerator. It provides stable support and helps reduce vibration during compressor operation. Replace this rail if it is bent, cracked, or corroded, or if you notice excessive vibration or unusual noise coming from the bottom of the refrigerator.
More
$25.56
- Compare At:
-
$34.44
- You Save:
-
$8.88
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2154473
Fix refrigerator electrical issues with this wire connector. Restores power to components when connections fail. Simple plug-in installation.
More
$15.95
- Compare At:
-
$18.98
- You Save:
-
$3.03
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 2198665
Water supply tube for refrigerators. Connects water line to dispenser or ice maker. Replace if cracked, leaking, kinked, or damaged to restore proper flow.
More
$31.95
- Compare At:
-
$39.01
- You Save:
-
$7.06
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 2216443
This official service tech sheet provides the appliance's wiring diagrams, component locations and diagnostic reference so technicians can read error codes and follow OEM troubleshooting guidance for accurate repairs. What it does:
- Shows wiring diagrams and connector pinouts to identify electrical paths and harness locations
- Lists component names/locations to help find and verify parts during service
- Includes common diagnostic codes and test points used by technicians
- Useful when the original paper/service sheet is missing, torn or unreadable
What's included: One original tech sheet. Install notes:
- Not an electrical or wearable part — store or mount the sheet where it stays dry and legible
- Remove power to the appliance before following any tests or wiring work shown on the sheet
- Use the tech sheet only as a reference; follow OEM service manuals and safety procedures during repairs
- If replacing a damaged printed copy, discard the old sheet and keep the new sheet with the appliance service records
More
$10.51
- Compare At:
-
$11.56
- You Save:
-
$1.05
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 489340
$9.05
- Compare At:
-
$9.96
- You Save:
-
$0.91
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 549193
$13.78
- Compare At:
-
$15.16
- You Save:
-
$1.38
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10683556
Replacement clip for refrigerators and freezers. Secures shelves, bins, or internal components. Order a new clip if yours is broken, cracked, or missing.
More
$14.00
- Compare At:
-
$14.89
- You Save:
-
$0.89
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10823377
Includes door, support, spring and mechanism delay. No longer uses the ribbon heater due to the improved foam design. If your refrigerator uses this ice door kit and the mounting tabs are broken you can use the broken tab ice door kit 8201756.
This part fixes the following symptoms
-
Door sweating
-
Door won't open or close
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
Repaired a leaky ice shoot door on an old Kenmore side by side fridge. Stephen M. • Nashua , NH • October 16, 2020
The parts provided fit perfectly, but my old Kenmore 106.56864602 fridge didn't follow the disassembly directions on the site.
To remove the front panel, pull the water drain catcher forward to expose two 1/4 inch screws. After removing the screws, you can then lift off the front panel and disconnect the ribbon cable.
There is another plastic housing on the front of the door held on with screws that appears to be glued into place. Thankfully removal isn't required. Do NOT attempt to slide...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2212363
Fix a refrigerator that won't dispense ice with a new auger motor. Typical repair takes 30 minutes with basic tools. Video instructions available.
Do-It-Yourself Stories from Customers like You
Auguer motor for ice maker stopped working Tommy T. • Fayetteville , GA • January 12, 2015
Very easy to replace. Take off cover to auger compartment. Unplug power connector from auger motor. Remove four screws holding auger motor to refrig. Put new auger motor in place, insert screws, insert power connector, replace cover. Use ice maker!
Read more
More