Kenmore Refrigerator 106.57051792 (10657051792, 106 57051792) Parts
Bestselling
Price High to Low
Price Low to High
By: Whirlpool
Part Number: WP3400852
Do-It-Yourself Stories from Customers like You
15 year old refrigerator door handle broke Martine G. • Everett , WA • March 30, 2015
I watched a 3 minute video on You Tube on how to replace a refrigerator door handle and it took me 3 minutes to replace mine. Super easy!
Read more
More
$13.31
Compare At:
$14.64
You Save:
$1.33
By: Whirlpool
Part Number: WP489399
$7.56
Compare At:
$8.32
You Save:
$0.76
By: Whirlpool
Part Number: WP503695
$57.39
Compare At:
$67.72
You Save:
$10.33
By: Whirlpool
Part Number: WP505587
Putty sealer adhesive for refrigerators and freezers. Seals joints, gaps, and connections. Replace when old sealant is cracked, dried out, or missing.
Do-It-Yourself Stories from Customers like You
High level of noise with each compressor cycle Bruce H. • Bonita Springs , FL • July 24, 2015
The installation of the new condenser motor was as the video described; there were no surprises. I noted the difference in operation immediately, the fan was moving at a higher rate of speed in a smoother motion. The new motor had far less shaft end play and seems to move more air across the condenser coil than the original motor. All in all, this was a relatively easy repair that solved a real refrigerator performance problem; the unit now cycles less often and generates less compressor heat.
Read more
More
$75.95
Compare At:
$91.14
You Save:
$15.19
Do you need help?
Get Questions Answered Instantly.
By: Whirlpool
Part Number: WP978025
$45.30
Compare At:
$53.91
You Save:
$8.61
By: Whirlpool
Part Number: WPW10339879
Do-It-Yourself Stories from Customers like You
Kenmore washer made humming noise no agitation no more spin Peter W. • Cupertino , CA • October 18, 2026
Paid a friend and he changed the coupler, worked a couple times, then same prob. Hired a pro, ordered a lot of parts, changed drive shaft, transmission/gear case assembly, motor, coupler again. Refunding a lot of unnecessary parts.
Read more
More
$5.95
Compare At:
$7.08
You Save:
$1.13
By: Whirlpool
Part Number: W11807379
Do-It-Yourself Stories from Customers like You
The ice guard came off the icemaker and got tangled up and twisted in the bottom of the tray without the guard we had way too much ice being made Sandy S. • Yantis , TX • August 22, 2015
We bought a new ice guard and installed it. It is working really good now.
Read more
More
$22.78
Compare At:
$25.05
You Save:
$2.27
By: Whirlpool
Part Number: 4388358
Support plate kit for refrigerators. Includes left and right side mounting plates. Replace if cracked, broken, or missing to restore proper support.
More
$20.95
Compare At:
$24.93
You Save:
$3.98
By: Whirlpool
Part Number: W11751592
$15.40
Compare At:
$16.94
You Save:
$1.54
By: Whirlpool
Part Number: 1110560
Bearing body bracket for refrigerator assembly. Secures and supports internal components. Replace if cracked, broken, or damaged to restore proper fit.
More
$7.95
Compare At:
$9.54
You Save:
$1.59
By: Whirlpool
Part Number: 606755
This insulation bag fits inside the refrigerator or freezer door panel to help maintain consistent internal temperatures. It acts as a thermal barrier that prevents warm outside air from affecting the sealed compartment. Replace it if you notice condensation forming on the door interior, inconsistent temperatures, or if the existing insulation is torn, compressed, or missing.
More
$46.35
Compare At:
$55.16
You Save:
$8.81
By: Whirlpool
Part Number: 4387535
Fridge not cooling but lights work? This compressor overload stops overheating and prevents startup damage. DIY-friendly repair in about 1 hour.
This part fixes the following symptoms
Won't start
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Overload switch stopped working turning off the refrigerator compressor J Michael L. • Waxahachie , TX • August 06, 2016
Replaced overload switch and start relay with convenient repair set.Video available on website that gave step by step instructions. Followed the video steps for removal and installation.... plugged in the refrigerator compressor started up everything cool in minutes
Read more
More
$87.27
Compare At:
$103.85
You Save:
$16.58
Usually ships within 4 - 14 days
Shop With Confidence
Over 15 million customers served!
By: Whirlpool
Part Number: WP2196090
Fix a cracked ice bin causing jams or spills. This refrigerator ice container stores and dispenses ice smoothly. Simple DIY repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Ice containter was cracked Kristy L. • Plaquemine , LA • July 06, 2015
Replaced with new container
Read more
More
$91.23
Compare At:
$108.56
You Save:
$17.33
Usually ships within 4 - 14 days
By: Whirlpool
Part Number: WP3400906
Secures panels, brackets, and internal components in your refrigerator. Replace missing, stripped, or corroded screws to restore tight assembly fit.
Do-It-Yourself Stories from Customers like You
Broken ice maker door and tabs David G. • San Antonio , TX • December 22, 2018
Through your website and YouTube DIY’s I was able to find the parts for my specific refrigerator and fix it, the wife had been after me for over a year to fix it and did not. I was ready to buy a new refrigerator but decided to try and fix it myself you guys rock !
Read more
More
$7.56
Compare At:
$8.32
You Save:
$0.76
Usually ships within 4 - 14 days
By: Whirlpool
Part Number: 2188405A
Creates a tight seal to keep cold air in and humid air out. Replace if door won't seal, frost builds up, or gasket is torn. Confirm fit by model number.
More
$152.95
Compare At:
$180.48
You Save:
$27.53
Usually ships within 4 - 14 days
By: Whirlpool
Part Number: WP2182124
Ice stripper removes ice cubes from the ice maker mold so the dispenser or storage bin fills properly. Replacing a worn or broken stripper helps the ice maker eject cubes cleanly and reduces ice jams or stuck cubes. What it does:
Pushes or guides harvested cubes out of the ice mold into the bin during the ice maker's harvest cycle. Prevents cubes from sticking in the mold; a damaged stripper can cause incomplete ejection or leftover ice in the mold. Works with the ice maker's ejector mechanism to maintain consistent cube release and storage. A faulty or broken stripper may lead to noisy operation, partial fills, or visible ice build-up in the mold. What's included: One ice stripper. Install notes:
Disconnect power to the appliance before starting any repair to avoid electrical shock. Remove the ice maker or access panel per the manufacturer's instructions to reach the stripper; keep small parts and screws organized. Inspect the ice mold and surrounding components for damage or ice build-up; clear ice before installing the new stripper. After installation, restore power and run a test harvest cycle to ensure proper cube ejection.
Do-It-Yourself Stories from Customers like You
Ice stripper was broken on ice maker John A. • Baton Rouge , LA • March 12, 2015
Checked out the video on your site on how to disassemble the ice maker. Was really easy when you know the correct sequence. Only 3 screws and it's out of the freezer. Disassembled the ice maker on my kitchen counter and replaced the ice stripper. Reassembled and installed back in my freezer. It is as good as new
Read more
More
$47.41
Compare At:
$56.42
You Save:
$9.01
Usually ships within 4 - 14 days