Kenmore Refrigerator 106.59132801 (10659132801, 106 59132801) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11623163
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10276341
The Snack Pan Shelf is an OEM part for Whirlpool refrigerators. It provides an additional level of storage space on the inside.
The shelf is designed to fit securely on the side walls of the fridge cavity measuring 18 inches wide by 18-1/2 inches deep. If you need a shelf with a curved front, order WPW10276348.
Symptoms of a bad snack pan shelf include:
- Cracks or breaks in the shelf material
- Inability to lock the shelf into the desired position
- Wobbling or instability
- Missing retainers that hold the shelf in place
Causes of a bad shelf can be normal wear and tear over time from repeated removal and washing. Accidental drops or impact damage may also affect structural integrity.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
My snack drawer broke Stacy P. • Reading , PA • November 08, 2015
I tried duct tape but then decided to buy the parts from Appliance Pro's and fix it correctly. It looks brand new now. Thank You :)
Read more
More
$159.60
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10151374
Fix food freezing in fresh food or crisper drawers with this refrigerator air damper assembly. Regulates airflow between compartments. DIY video included.
Do-It-Yourself Stories from Customers like You
My freezer was cooling but not fridge Charnel C. • North Lauderdale , FL • January 24, 2017
Checked air damper, it was blocked with ice. Replace it and defrosted it. Good to go.
Read more
More
$49.51
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2188756
This refrigerator unit cover mounts over the interior control/air distribution housing. It restores a clean, finished look and protects internal components by enclosing the area as designed. What it does:
- Provides a protective, finished cover for the control/diffuser housing
- Helps keep the airflow path properly enclosed inside the compartment
- Replace if the cover is cracked, warped, loose, or missing
- Common signs include rattling, visible gaps, or exposed components
What's included:
Install notes:
- Unplug the refrigerator before servicing
- Remove shelves or bins for access as needed
- Release tabs or remove screws to take off the old cover; retain hardware for reuse
- Align and secure the new cover; do not overtighten fasteners, then restore power
Do-It-Yourself Stories from Customers like You
Cover unit in back of refrigerator need to be replaced Lawrence T. • Catalina , AZ • March 20, 2016
VERY EASY TO REPLACED OLD COVER-UNIT NEW COVER-UNIT.
Read more
More
$82.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400906
Secures panels, brackets, and internal components in your refrigerator. Replace missing, stripped, or corroded screws to restore tight assembly fit.
Do-It-Yourself Stories from Customers like You
Broken ice maker door and tabs David G. • San Antonio , TX • December 22, 2018
Through your website and YouTube DIY’s I was able to find the parts for my specific refrigerator and fix it, the wife had been after me for over a year to fix it and did not. I was ready to buy a new refrigerator but decided to try and fix it myself you guys rock !
Read more
More
$7.56
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2182124
Ice stripper removes ice cubes from the ice maker mold so the dispenser or storage bin fills properly. Replacing a worn or broken stripper helps the ice maker eject cubes cleanly and reduces ice jams or stuck cubes. What it does:
- Pushes or guides harvested cubes out of the ice mold into the bin during the ice maker's harvest cycle.
- Prevents cubes from sticking in the mold; a damaged stripper can cause incomplete ejection or leftover ice in the mold.
- Works with the ice maker's ejector mechanism to maintain consistent cube release and storage.
- A faulty or broken stripper may lead to noisy operation, partial fills, or visible ice build-up in the mold.
What's included: One ice stripper. Install notes:
- Disconnect power to the appliance before starting any repair to avoid electrical shock.
- Remove the ice maker or access panel per the manufacturer's instructions to reach the stripper; keep small parts and screws organized.
- Inspect the ice mold and surrounding components for damage or ice build-up; clear ice before installing the new stripper.
- After installation, restore power and run a test harvest cycle to ensure proper cube ejection.
Do-It-Yourself Stories from Customers like You
One of the teeth on the ice stripper was broken off Michelle F. • Hines , OR • August 07, 2014
Simply replaced the broken ice stripper with a new one.
Read more
More
$47.41
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2179342
Crisper drawer won't adjust humidity or slide is broken? This humidity control slide mounts in the crisper cover to regulate airflow and moisture levels.
More
$20.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2304249
Bottom hinge plate anchors your refrigerator's lower door hinge. Replace when door sags, won't close properly, or plate shows wear. Verify fit by model.
More
$9.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2315522
This thermostat retainer clip secures the defrost thermostat to the evaporator tubing in your refrigerator or freezer, maintaining firm contact for accurate temperature sensing and dependable defrost operation.
- Holds the thermostat firmly against the evaporator line for proper temperature feedback
- Helps prevent a loose or dangling thermostat that contribute to frost buildup and poor defrost performance
- Restores correct mounting when the original clip is cracked, bent, or missing
- Common signs include a broken clip or a thermostat not attached to the coil
What's included: 1 thermostat retainer clip Install notes:
- Disconnect power to the appliance before servicing; wear cut-resistant gloves
- Access the evaporator compartment; remove accumulated frost/ice as needed without prying on coil fins
- Position the thermostat body flat against the tubing and snap the retainer over it, avoiding pinched wires or damaged fins
- Confirm a secure fit and proper wire routing before reassembling and restoring power
More
$7.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 4388295
Rubber grommet kit that mounts and cushions the compressor. Replace worn, cracked, or damaged grommets to restore proper support and isolation.
Do-It-Yourself Stories from Customers like You
Refrigerator compressor was knocking Thomas F. • Cedar Park , TX • March 10, 2019
Replaced mounts
Read more
More
$87.56
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10278732
Fix ice not dispensing properly with this ice crusher blade. Replaces free-wheeling or worn blades on the auger assembly. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
The ice maker would not shut off making ice even when the bin was full Kevin M. • Citrus Heights , CA • November 17, 2017
Spoke with a representive that diagnosed the problem as a bad control board. After receiving the new control board, I was able to easily perform the replacement by watching the step-by-step instructional video on the website. It is now functioning normally.
Read more
More
$53.21
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2203407W
White plastic hinge cover for refrigerator doors. Replaces cracked, broken, or missing hinge covers. Installs over door hinge mechanism for clean look.
More
$14.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 1119020
Return spring provides tension for ice maker levers, door latches, or control rods. Replace if broken, stretched, or missing to restore proper snap-back.
More
$12.59
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2171706
Replace your cracked or cloudy dispenser light lens to restore clear illumination. Protects the bulb and improves visibility. Verify fit with your model.
More
$53.21
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627843
Ice cubes stuck in tray and won't eject? This ejector arm pushes ice from the mold into the bin. Simple snap-in install restores ice production.
More
$50.57
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10278731
Fix ice that won't crush or dispense with this refrigerator crusher blade. Solves bent or damaged blades preventing ice from dispensing. Easy DIY repair.
Do-It-Yourself Stories from Customers like You
Crush ice maker blade bent Melton R. • Hampton , VA • December 27, 2014
I removed the shaft from ice bucket removed the blade below and pulled off bent blade. Put new blade in the bent blade spot put lower blade back on screwed it back into Ice bucket replaced in fridge and now it works perfectly without hanging up.
Read more
More
$53.21
Out Of Stock
Usually ships within 4 - 14 days