Kenmore Refrigerator 106.9517610 (1069517610, 106 9517610) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 2147166
$99.95
- Compare At:
-
$117.24
- You Save:
-
$17.29
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 2150331
Protective wiring cover cap for refrigerators. Shields electrical connections from dust and damage. Replace if cracked, broken, or missing.
More
$24.68
- Compare At:
-
$29.37
- You Save:
-
$4.69
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 489340
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 627068
$11.74
- Compare At:
-
$12.91
- You Save:
-
$1.17
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1129177
$4.46
- Compare At:
-
$5.34
- You Save:
-
$0.88
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2002171
$28.75
- Compare At:
-
$34.22
- You Save:
-
$5.47
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1115290
Do-It-Yourself Stories from Customers like You
Crisper stud and frame needed to be replaced Korey J. • Brandon , FL • December 25, 2018
I previewed prior surveys on how to remove and replace the stud...that went well, it was the only thing in the repair that needed a tool. Inserted the new stud and turned approximately 3/4" turn and stud was in place and sturdy. After that, the crisper drawer slid into place and finished.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4317852
The Alumilastic Cement is an OEM part for Whirlpool appliances, typically used in refrigerators and freezers. It serves as a thermal mastic compound, designed to provide a secure and heat-conductive bond between various components, such as evaporator coils and the interior walls of the appliance.
Causes of a bad alumilastic cement can include drying out, cracking, or losing its adhesive properties over time. This can occur due to age, exposure to temperature fluctuations, or improper application. When the cement fails, it can lead to poor thermal conductivity and decreased cooling efficiency.
Symptoms of a bad alumilastic cement include:
- Reduced cooling performance
- Unusual noises from the cooling system
- Components becoming loose or detaching
- Increased energy consumption
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice maker wouldnt make ice Ty G. • Lewis Center , OH • December 30, 2014
I used your online troubleshooting tips and watched the videos on your site. I determined my thermostat was defective, ordered the thermostat which arrived in two days and I replaced the thermostat and I now have a full bin of ice !!!
The do it yourself video was extremely helpful and made the repair very easy.
Thanks so much for the great service and quick delivery !!!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 4386774
The Roller Assembly is an OEM part for Whirlpool refrigerators. This assembly includes the rollers that support and allow the refrigerator to be moved easily for cleaning or maintenance. Proper functioning rollers ensure smooth movement and stability of the appliance.
Causes of a bad roller assembly can include wear and tear from regular use, damage from moving the refrigerator improperly, or exposure to moisture leading to rust or corrosion.
Symptoms of a bad roller assembly include:
- Difficulty in moving the refrigerator
- Uneven or unstable placement of the appliance
- Unusual noises when moving the refrigerator
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The rubber on the roller assembly was ripped off Richard S. • Richfield , UT • July 15, 2018
Took the old assembly off and put the new on, just bolts on, very easy.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 4388405
Secures refrigerator shelves to the liner wall. Replace this stud if shelves sag, sit unevenly, or won't stay in place due to broken or missing support.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1114633
This refrigerator drawer track guides and supports your crisper or freezer drawer as it slides in and out. It ensures smooth operation and proper alignment while supporting the weight of the drawer and its contents. Replace this track if your drawer is difficult to open or close, doesn't slide smoothly, or falls off its guides.
Do-It-Yourself Stories from Customers like You
Broken track stud shelf shelf frame and cover John K. • Hyde Park , NY • December 10, 2015
The broken track and shelf stud were the most important part of the repair. I was astounded to find parts for a 20 year old fridge. I was concerned about how to remove the damaged stud. As luck would have it, your site contained a video on how to remove it. Without the video, I would not have been so successful and would most likely have done more harm than good. All I needed for the repair was an open end wrench. It took about 30 seconds to remove and replace. I could not be more please...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 1119787
White plastic hinge cover that snaps onto the top of your refrigerator door hinge. Replace if cracked, broken, or missing for a clean finished look.
Do-It-Yourself Stories from Customers like You
The seal on the door of the refigerator was damaged also the hinge cap needed replacing as it was cracked Michael S. • Fredericksburg , VA • January 20, 2016
I took the new seal out of it's packaging and used a blowdryer on low heat to soften up the seal so that the crease from shipping (it was folded to ship) disappeared. Next I took the refrigerator door off, removed the old seal, & cleaned the area where the new seal would be applied. Following the video on the Appliance Pro Parts website, I re-installed the new seal and put the door back on. Last step was to snap on the new hinge cap I ordered. The video online was easy to follow and this...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1114632
This right-side drawer rail allows smooth sliding operation of your refrigerator's crisper or deli drawer. It provides the track system that supports and guides the drawer as it opens and closes. Replace this part when drawers stick, won't slide smoothly, or have become misaligned.
Do-It-Yourself Stories from Customers like You
Shelf support arm broke Steven J. • Roswell , GA • May 22, 2020
Ordered the part, my wife installed in just a few minutes.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1115265
Color: white. Matching right side W10853640.
Do-It-Yourself Stories from Customers like You
Shelf bracket on refrigator was broken Jack M. • Odin , IL • April 04, 2016
TAP UPWARD ON OLD BRACKET TO RELEASE THEN PULL FORDWARD TO RELEASE THE BACK OF BRACKET. INSTALL NEW BRACKET IN REVERSE ORDER.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1116742
This meat pan cover is the replacement lid for an oven roaster/meat pan, helping retain juices and heat for even cooking and easier cleanup. It restores proper coverage for roasting and broiling accessories. What it does:
- Covers the meat/roaster pan to help keep heat and moisture around food for more even cooking
- Helps reduce splatter and drips inside the oven for easier clean-up
- Restores proper fit and function when the original lid is cracked, warped, or missing
- Designed for use with the matching oven roaster/meat pan accessory
What's included: One meat pan cover (1 count) Install notes:
- Allow oven to fully cool before handling or installing parts
- Handle carefully to avoid bending or damaging the cover; no special tools typically required
- For safety, follow your appliance owner's manual for accessory use and placement
Do-It-Yourself Stories from Customers like You
Broken track stud shelf shelf frame and cover John K. • Hyde Park , NY • December 10, 2015
The broken track and shelf stud were the most important part of the repair. I was astounded to find parts for a 20 year old fridge. I was concerned about how to remove the damaged stud. As luck would have it, your site contained a video on how to remove it. Without the video, I would not have been so successful and would most likely have done more harm than good. All I needed for the repair was an open end wrench. It took about 30 seconds to remove and replace. I could not be more please...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1129262