Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Kenmore Refrigerator 106.9550221 (1069550221, 106 9550221) Parts

Best Seller
Refrigerator Air Damper Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10151374

Fix food freezing in fresh food or crisper drawers with this refrigerator air damper assembly. Regulates airflow between compartments. DIY video included.

Do-It-Yourself Stories from Customers like You My freezer was cooling but not fridge   Charnel C. • North Lauderdale , FL • January 24, 2017

Checked air damper, it was blocked with ice. Replace it and defrosted it. Good to go. Read more

More
$49.51

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Refrigerator Compressor Overload
Genuine Whirlpool part
By: Whirlpool
Part Number: 4387535

Fridge not cooling but lights work? This compressor overload stops overheating and prevents startup damage. DIY-friendly repair in about 1 hour.

This part fixes the following symptoms
  • Won't start
  • Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You Overload switch stopped working turning off the refrigerator compressor   J Michael L. • Waxahachie , TX • August 06, 2016

Replaced overload switch and start relay with convenient repair set.Video available on website that gave step by step instructions. Followed the video steps for removal and installation.... plugged in the refrigerator compressor started up everything cool in minutes Read more

More
$87.27

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Ice Stripper (Ejector)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2182124

Ice stripper removes ice cubes from the ice maker mold so the dispenser or storage bin fills properly. Replacing a worn or broken stripper helps the ice maker eject cubes cleanly and reduces ice jams or stuck cubes. What it does:

  • Pushes or guides harvested cubes out of the ice mold into the bin during the ice maker's harvest cycle.
  • Prevents cubes from sticking in the mold; a damaged stripper can cause incomplete ejection or leftover ice in the mold.
  • Works with the ice maker's ejector mechanism to maintain consistent cube release and storage.
  • A faulty or broken stripper may lead to noisy operation, partial fills, or visible ice build-up in the mold.
What's included: One ice stripper. Install notes:
  • Disconnect power to the appliance before starting any repair to avoid electrical shock.
  • Remove the ice maker or access panel per the manufacturer's instructions to reach the stripper; keep small parts and screws organized.
  • Inspect the ice mold and surrounding components for damage or ice build-up; clear ice before installing the new stripper.
  • After installation, restore power and run a test harvest cycle to ensure proper cube ejection.

Do-It-Yourself Stories from Customers like You One of the teeth on the ice stripper was broken off   Michelle F. • Hines , OR • August 07, 2014

Simply replaced the broken ice stripper with a new one. Read more

More
$47.41

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Thermostat Retainer Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2315522

This thermostat retainer clip secures the defrost thermostat to the evaporator tubing in your refrigerator or freezer, maintaining firm contact for accurate temperature sensing and dependable defrost operation.

  • Holds the thermostat firmly against the evaporator line for proper temperature feedback
  • Helps prevent a loose or dangling thermostat that contribute to frost buildup and poor defrost performance
  • Restores correct mounting when the original clip is cracked, bent, or missing
  • Common signs include a broken clip or a thermostat not attached to the coil
What's included: 1 thermostat retainer clip Install notes:
  • Disconnect power to the appliance before servicing; wear cut-resistant gloves
  • Access the evaporator compartment; remove accumulated frost/ice as needed without prying on coil fins
  • Position the thermostat body flat against the tubing and snap the retainer over it, avoiding pinched wires or damaged fins
  • Confirm a secure fit and proper wire routing before reassembling and restoring power

More
$7.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Refrigerator Compressor Mounting Grommet Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 4388295

Rubber grommet kit that mounts and cushions the compressor. Replace worn, cracked, or damaged grommets to restore proper support and isolation.

Do-It-Yourself Stories from Customers like You Refrigerator compressor was knocking   Thomas F. • Cedar Park , TX • March 10, 2019

Replaced mounts Read more

More
$87.56

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Terminal Block Cover (Terminal), 1 Count
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2162358

This terminal block cover protects the appliance's electrical connection area from accidental contact and debris, helping reduce the risk of shorts and corrosion while keeping wiring secure and contained. What it does:

  • Covers and shields the power terminal/block where the power cord connects
  • Helps prevent accidental contact with live terminals and reduces short risk
  • Keeps out dust, lint and debris that can cause corrosion or arcing
  • Useful when the original cover is cracked, missing or showing burn marks
What's included: One terminal block cover (single piece) Install notes:
  • Always disconnect power (unplug or switch off breaker) before servicing electrical components
  • Typically installs over the terminal block and secures with the existing fastener(s); inspect mounting hardware for wear
  • Replace if cracked, melted or if terminals are exposed; ensure cover seats fully before restoring power

More
$52.68

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Ice Maker Ejector Arm
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627843

Ice cubes stuck in tray and won't eject? This ejector arm pushes ice from the mold into the bin. Simple snap-in install restores ice production.

More
$50.57

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Appliance Touch-Up Paint, Platinum
Genuine Whirlpool part
By: Whirlpool
Part Number: 72113

0.6 oz. platinum touch-up paint with brush for appliances. Repairs scratches, chips, and gouges on doors, handles, and trim panels. Acrylic formula.

More
$15.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Refrigerator Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: 8533917

Replacement mounting screw for refrigerators. Secures panels, trim pieces, and small assemblies. Needed when original screw is missing or damaged.

Do-It-Yourself Stories from Customers like You Broken ice maker   Dennis S. • Sevierville , TN • August 14, 2018

Replaced Ice maker and sensors …. Read more

More
$12.13

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Refrigerator Air Diffuser Cover
Genuine Whirlpool part
By: Whirlpool
Part Number: 2152019

Covers and protects the air diffuser opening in your refrigerator. Replace if cracked, broken, or missing to restore proper airflow direction and sealing.

More
$48.46

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Refrigerator Terminal Block Clip Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 833938

Fix loose wiring or rattling sounds in your refrigerator with this terminal block clip kit. Secures harnesses and panels to restore proper fit.

More
$5.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Screw (1/4-20 Thread)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489427

This is a replacement 1/4-20 threaded screw used to secure appliance components and panels. It restores proper fastening where a matching screw is missing, loose, or stripped and helps stop rattling or misalignment. What it does:

  • Secures panels, brackets, and assemblies to maintain proper alignment and reduce vibration
  • Replaces missing or damaged fasteners that cause loose or rattling parts
  • Works wherever a 1/4-20 threaded screw is specified by the manufacturer
  • Simple mechanical fastener—no electrical or calibration changes required
What's included: One 1/4-20 threaded screw. Install notes:
  • Disconnect power to the appliance before servicing to avoid injury
  • Use the matching driver and thread engagement; do not overtighten to prevent stripping
  • Verify screw length and head type match the original before installing
  • If threads are damaged, repair or replace the mating component rather than forcing the screw

Do-It-Yourself Stories from Customers like You All four wheels had disintegrated black rubber had broken down   Niles W. • Colorado Springs , CO • November 15, 2019

I first ordered the listed roller assembly (front wheels) 2 wheels came one rear wheel and the screw. The information stated frequently bought together showing only one rear wheel (cabinet roller). I ordered the roller assembly wheels and one cabinet wheel by accident and one screw. The frequently bought together should include 2 cabinet rollers (rear wheels). I had to order a second rear (cabinet roller) which came later. The original rear wheels were the same diameter as the front wheels... Read more

More
$7.34

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Refrigerator Fresh Food Air Deflector
Genuine Whirlpool part
By: Whirlpool
Part Number: 2179350

Directs chilled air through the fresh-food compartment to maintain even cooling. Replace if cracked, broken, or missing to restore proper airflow.

More
$47.41

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Refrigerator Air Duct Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: 2215823

Secures air duct to housing, maintaining proper airflow alignment. Replace if broken or loose to prevent air leaks. Confirm fit with your model.

More
$7.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Control Cam Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2182195

 

More
$12.26

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Thermal Fuse Clip (Mounting Clip)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP628379

This small metal mounting clip secures the thermal fuse in place to maintain proper thermal contact and stable wiring. It helps keep the fuse positioned so the appliance can monitor temperature reliably and operate safely. What it does:

  • Secures the thermal fuse to the appliance housing or duct to prevent movement
  • Keeps the fuse in correct contact with temperature-sensing surfaces
  • Helps prevent intermittent heating or thermal-sensor misreads caused by a loose fuse
  • Useful when replacing a damaged or missing fuse retainer during fuse service
What's included:
  • One thermal fuse mounting clip
Install notes:
  • Disconnect power to the appliance before servicing to avoid shock or injury
  • Remove access panels per your model's service instructions to reach the fuse location
  • Install clip in the same orientation as the original; use pliers if needed to seat it firmly
  • Inspect the thermal fuse and wiring while installing; replace any damaged components per OEM guidance

More
$7.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google