Kenmore Refrigerator 106.9557580 (1069557580, 106 9557580) Parts

Genuine Whirlpool part

Light Lens (Diffuser), 1 Piece

By: Whirlpool

Part Number: 2171705

This lens covers the interior lamp in the refrigerator compartment, diffusing light and protecting the bulb. Replacing a cracked or missing lens restores even illumination and keeps the bulb safely shielded from bumps and splashes. What it does:

Diffuses the compartment light for clearer, more even illumination
Shields the bulb from accidental contact, debris, and moisture
Common fix for broken tabs, a yellowed/warped or cracked lens, or a missing cover
Helps reduce glare from an exposed bulb and improves visibility inside

What's included:

1 lens

Install notes:

Disconnect power and let the bulb cool before starting
Release the retaining tabs or remove screws; support the lens as you take it off
Align and fully seat the new lens; ensure clips engage or screws are snug—do not overtighten

Do-It-Yourself Stories from Customers like You The light switch on the freezer failed making it impossible to see in the box. Phyllis B. • Atlantic Beach , NC • September 07, 2017

It became possible to find a new switch thus negating a need for a new freezer. The switch was ordered, the How-To video was viewed and allowed an easy placement of the new switch. two new light bulbs were installed and WOW I can see the whole freezer contents. Thank you. Read more

Genuine Whirlpool part

Fan Motor Retainer (Refrigerator)

5.0 (2)

By: Whirlpool

Part Number: WP2155590

This fan motor retainer secures the refrigerator's fan motor to its mounting bracket or shroud, reducing vibration and keeping the fan aligned so air circulates properly for consistent cooling.

Secures the fan motor to its bracket or shroud
Maintains proper fan alignment and clearance for consistent airflow
Helps reduce vibration, buzzing, or rattling from a loose motor
A worn or missing retainer may present as scraping fan noises or uneven airflow

What's included: 1 fan motor retainer

Disconnect power to the refrigerator before servicing; allow moving parts to stop and wear cut-resistant gloves
Access the fan area per your model
Transfer the motor into the new retainer and reinstall using existing hardware as required
Ensure the fan blade spins freely and clears the shroud before restoring power

Do-It-Yourself Stories from Customers like You Evaporate motor went out on my Whirlpool refrigerator freezing cold at the bottom but warm on top Toan N. • Anaheim , CA • June 24, 2018

When I first found out that the evaporator fan doesn't work, I went to a local home appliances store to buy one , cost me $40 , real easy to replace it and it solves the main problem , but this evaporator motor was making some loud noise every now and then , especially when we open the door too often. Then I ordered another one from Repair Clinic , this one is even worst , making a loud hum noise constantly, I had to return it. My wife really wants to buy another refrigerator but I don't... Read more

Genuine Whirlpool part

Refrigerator Shelf Support Stud

By: Whirlpool

Part Number: 4388405

Secures refrigerator shelves to the liner wall. Replace this stud if shelves sag, sit unevenly, or won't stay in place due to broken or missing support.

Genuine Whirlpool part

Refrigerator Hinge Cover

5.0 (2)

By: Whirlpool

Part Number: 1119787

White plastic hinge cover that snaps onto the top of your refrigerator door hinge. Replace if cracked, broken, or missing for a clean finished look.

Do-It-Yourself Stories from Customers like You The seal on the door of the refigerator was damaged also the hinge cap needed replacing as it was cracked Michael S. • Fredericksburg , VA • January 20, 2016

I took the new seal out of it's packaging and used a blowdryer on low heat to soften up the seal so that the crease from shipping (it was folded to ship) disappeared. Next I took the refrigerator door off, removed the old seal, & cleaned the area where the new seal would be applied. Following the video on the Appliance Pro Parts website, I re-installed the new seal and put the door back on. Last step was to snap on the new hinge cap I ordered. The video online was easy to follow and this... Read more

Genuine Whirlpool part

Hinge Cover

By: Whirlpool

Part Number: WP1129262

White. For almond order WP1129262.

Genuine Whirlpool part

Shelf

By: Whirlpool

Part Number: WP2194297K

Genuine Whirlpool part

Arm-Pivot

By: Whirlpool

Part Number: W11256541

Genuine Whirlpool part

Control Cam Kit

By: Whirlpool

Part Number: WP2182195

Genuine Whirlpool part

Ice Dispenser Guide

By: Whirlpool

Part Number: 1124730

White

Genuine Whirlpool part

Grille

5.0 (4)

By: Whirlpool

Part Number: 2155485

Color: black. Measures about 36 inches wide by 5 inches high.

Do-It-Yourself Stories from Customers like You Replaced bottom grill Cynthia W. • Troy , MI • December 12, 2015

Just had to take off old and put on new. The new one is black and the old one was white so I was concerned that it wouldn't look right but it looks fine. Read more