Kenmore Dryer 110.62722101 (11062722101, 110 62722101) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP339956
Seals the lint screen housing to prevent air leaks and maintain proper airflow. Replace if damaged, missing, or causing lint buildup. Verify fit.
This part fixes the following symptoms
-
Takes too long to dry
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Gas dryer did not heat and excessive lint inside the unit James C. • New Boston , MI • July 20, 2017
Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered...
Read more
More
$9.41
- Compare At:
-
$11.20
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: 279441
Supports the front drum and reduces friction for smooth rotation. Replace if your dryer is noisy, clicking, or leaving marks on clothes. Confirm fit.
Do-It-Yourself Stories from Customers like You
Gas dryer did not heat and excessive lint inside the unit James C. • New Boston , MI • July 20, 2017
Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered...
Read more
More
$57.95
- Compare At:
-
$69.54
- You Save:
-
$11.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8066184
The Motor Pulley is an OEM part for Whirlpool dryers, connects the dryer motor to the drum belt, enabling the drum to turn and efficiently dry your clothes. This pulley is crucial for the smooth operation of the dryer, ensuring that the belt is tensioned correctly and runs smoothly without slipping or causing wear.
Causes of a bad Motor Pulley include wear and tear from regular use, a buildup of lint and debris that can interfere with its operation, or a malfunctioning dryer motor that puts undue stress on the pulley.
Symptoms of a bad Motor Pulley include:
- Unusual noises coming from the dryer, such as squeaking or grinding
- The dryer drum failing to turn even though the motor is running
- The dryer taking longer than normal to dry clothes, which can occur if the pulley is not providing proper tension to the belt
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken motor pulley Michele D. • Jefferson , MA • December 11, 2015
Replaced pulley and belt.
Read more
More
$39.95
- Compare At:
-
$47.94
- You Save:
-
$7.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22002263
Illuminates the dryer drum for better visibility when loading and unloading. Replace when bulb burns out or fails to light. Confirm fit with your model.
Do-It-Yourself Stories from Customers like You
Squeaky noise and not fully drying David H. • Santa Clarita , CA • September 20, 2019
Originally the dryer was squeaking a lot, so I purchased a new belt tensioner, but the original tensioner was an old-style no wheel tensioner, so that wasn't the source of the squeaking.
I saw a lot of lint had built up inside the unit where there shouldn't have been that much. So I viewed a few videos on the Appliance Pros site and saw that the rear wheel guides were the cause of the squeaking and the rear felt drum and blower housing seal needed to be replaced. The rear blower housing was...
Read more
More
$15.55
- Compare At:
-
$18.50
- You Save:
-
$2.95
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10359270
Left-side shaft that supports the drum roller assembly in your dryer. Replace if worn, bent, or damaged to restore proper drum rotation and alignment.
Do-It-Yourself Stories from Customers like You
Old appliance with worn drum roller shafts and rollers Macario M. • Kingsville , TX • December 17, 2021
Use the videos on this website here and you can repair most brands. Many are duplicate in design.
1. Unplug the machine.
2. Move it away from a confined area to get more room.
3. Remove lint filter and the two screws that hold the exhaust filter port to the top of the cabinet.
4. Use a putty knife or actually a butter knife and release the top of the cabinet from the main drum housing. You will slide the knife between the top and the main cabinet at the plastic catches. Look for them and you...
Read more
More
$52.95
- Compare At:
-
$63.01
- You Save:
-
$10.06
Genuine Whirlpool part
By: Whirlpool
Part Number: W11415783
The Seal is an OEM part for Whirlpool dryers. This specific seal is designed to fit around the blower housing, ensuring a tight seal that prevents air leaks within the dryer. The blower housing is a critical component of the dryer's air circulation system, which moves air through the drum to dry clothes efficiently.
Causes of damage to the Seal can include wear and tear from regular use, excessive heat degrading the material over time, or improper maintenance practices that can cause physical damage to the seal.
Symptoms of a bad Seal include:
- Longer drying times than usual
- Excessive heat buildup in the dryer
- Unusual noises from the dryer, such as rattling or buzzing
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Gas dryer did not heat and excessive lint inside the unit James C. • New Boston , MI • July 20, 2017
Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered...
Read more
More
$16.76
- Compare At:
-
$19.78
- You Save:
-
$3.02
Genuine Whirlpool part
By: Whirlpool
Part Number: W11778253
This replacement screen fits into the appliance's filtration path. It captures debris to protect internal components and helps restore proper airflow or water flow when the original screen is torn, warped, clogged, or missing.
- Filters debris to prevent it from entering sensitive components such as pumps, blowers, or valves
- Helps maintain proper airflow or water circulation for consistent performance
- Common failure signs: torn mesh, cracked or warped frame, debris bypassing the screen
- Can contribute to longer cycles, reduced performance, or recurring clogs when damaged or missing
What's included: 1 screen Install notes:
- Disconnect power to the appliance; turn off water supply if applicable
- Access the screen location per your model's instructions; remove the old screen and clean the housing
- Seat the new screen fully, ensuring correct orientation and that any tabs/locks engage
- Reassemble and test for proper operation; check for leaks or airflow restrictions
Do-It-Yourself Stories from Customers like You
The lint screen was torn Thomas P. • Cleveland , TN • December 19, 2022
Bought an OEM replacement. Cost more than the aftermarket part but fit perfectly.
Read more
More
$32.64
- Compare At:
-
$35.74
- You Save:
-
$3.10
Genuine Whirlpool part
By: Whirlpool
Part Number: W10906683
The Door Seal is an OEM part for Whirlpool dryers. It forms a tight seal around the dryer door, preventing heat from escaping and ensuring efficient drying performance. This seal helps to maintain the internal temperature of the dryer, optimizing energy use and improving drying results.
Causes of a bad door seal can include wear and tear from regular use, damage due to improper handling or cleaning, or deterioration over time. A compromised door seal can affect the efficiency of the dryer and lead to potential safety issues.
Symptoms of a bad door seal include:
- Heat escaping from the dryer door
- Longer drying times
- Higher energy consumption
- Visible wear or damage to the seal
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The door gasket was broken and was tearing cloths David M. • Lima , OH • December 19, 2019
I replaced the gasket. Removing the old one was not easy. I used a razor knife to cut out most of it. And then I used rubbing alcohol to soften the remaining glue and scrapped it out with a small blade screwdriver
Read more
More
$62.95
- Compare At:
-
$74.28
- You Save:
-
$11.33
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10359269
Right-side shaft for dryer drum support roller. Replace if worn, bent, scored, or damaged to restore proper drum rotation. Installs on right side of cabinet.
Do-It-Yourself Stories from Customers like You
Old appliance with worn drum roller shafts and rollers Macario M. • Kingsville , TX • December 17, 2021
Use the videos on this website here and you can repair most brands. Many are duplicate in design.
1. Unplug the machine.
2. Move it away from a confined area to get more room.
3. Remove lint filter and the two screws that hold the exhaust filter port to the top of the cabinet.
4. Use a putty knife or actually a butter knife and release the top of the cabinet from the main drum housing. You will slide the knife between the top and the main cabinet at the plastic catches. Look for them and you...
Read more
More
$51.95
- Compare At:
-
$61.82
- You Save:
-
$9.87
Genuine Whirlpool part
By: Whirlpool
Part Number: W11035878
Seals the gap between drum and front panel to retain heat and reduce friction. Replace if worn, torn, or causing noise. Confirm fit with your model.
Do-It-Yourself Stories from Customers like You
Gas dryer did not heat and excessive lint inside the unit James C. • New Boston , MI • July 20, 2017
Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered...
Read more
More
$59.95
- Compare At:
-
$71.34
- You Save:
-
$11.39
Genuine Whirlpool part
By: Whirlpool
Part Number: 49621
The Dryer Leveling Foot is an OEM part for Whirlpool dryers. It is designed to support and stabilize the dryer by allowing adjustments to the height and leveling of the unit. Proper leveling ensures the dryer operates smoothly and efficiently, reducing vibrations and preventing unwanted movement during cycles.
Causes of a bad leveling foot can include wear and tear from regular use, damage from moving the dryer, or breakage due to heavy loads and stress. Over time, the threads on the leveling foot can wear out, or the foot itself can become cracked or deformed.
Symptoms of a bad leveling foot include:
- Dryer rocking or wobbling during operation
- Unusual noises or vibrations
- Difficulty in adjusting the dryer's height
- Visible damage or wear on the leveling foot
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Took the base off the washer and dryer and they had no feet on them. Paula S. • Onalaska , WA • March 22, 2014
Bought the leveling feet and screwed them in the bottom and they work great.
Read more
More
$6.95
- Compare At:
-
$8.27
- You Save:
-
$1.32
Genuine Whirlpool part
By: Whirlpool
Part Number: W10854425
The Dryer Clip is an OEM component for Whirlpool electric and gas dryers. It securely fastens critical ductwork attached to the dryer cabinet. Over extended periods, the constant vibrations produced during tumbling cycles cause microscopic fractures or loosening within the clip material where it grips duct joints.
Causes relate to ordinary fatigue from long-term resonance vibrations concentrated at anchoring points.
Symptoms involve:
- Loose or detached venting/ductwork affecting airflow
- Noticeable leaks emerging at separation interfaces
- Reduced drying effectiveness due to compromised ventilation
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Dryer just needed some new parts Kim K. • Murrieta , CA • November 01, 2020
The front panel clips needed to be replaced as they were bent and the some of the tabs for the bearing ring had broken off. Very pleased with the price, the parts and the quick delivery. Thank you.
Read more
More
$15.71
- Compare At:
-
$18.69
- You Save:
-
$2.98
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017
Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.
Do-It-Yourself Stories from Customers like You
Chipped paint Thomas S. • Middletown , DE • September 03, 2014
Touch up paint
Read more
More
$11.51
- Compare At:
-
$13.70
- You Save:
-
$2.19
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930
Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.
The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.
The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.
Symptoms needing for Appliance Spray Paint include:
- Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
- A desire to refresh or update the appearance of the appliance without the need for complete replacement
- Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$24.95
- Compare At:
-
$29.94
- You Save:
-
$4.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90296
The Push Clip is an OEM replacement part for Whirlpool dryers. Situated internally near the rear cylinder wall, it firmly secures the drum support roller assembly.
Causes of failure relate to fatigue from years of absorbing drum impacts and associated mechanical stresses. Corrosion penetration if moisture enters the clip mounting area increases operational resistance over time as well.
Symptoms consist of:
- Uneven drying and weakened tumbling action inside the cylinder
- Vibration or noise emerging from the rear roller area
- Premature wear signals stemming from dislocated roller assembly
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Screaching noise Linda Z. • Kailua Kona , HI • February 06, 2015
Followed the video- opened the front of the dryer and removed the drum. It was evident that one of the wheels had worn and wasn't turning freely like the other one. The video showed how to remove the roller. Very simple process and now the dryer works just fine.
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP688805
The Clip is an OEM part for Whirlpool dryers. This part secures the control knob to the dryer’s control panel, ensuring it remains firmly attached and functions correctly. The clip helps provide stability and precise control over the dryer settings.
Causes of a bad clip can include regular wear and tear, accidental damage during use, or stress from frequent adjustments.
Symptoms of a bad clip include:
- Knob becoming loose or falling off
- Difficulty turning the knob to adjust settings
- Knob not staying securely in place
- Knob wobbling or feeling unstable
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
More
$9.41
- Compare At:
-
$11.20
- You Save:
-
$1.79