Kenmore Dryer 110.96572100 (11096572100, 110 96572100) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10899578
This is the complete drum assembly for a clothes dryer - the large cylindrical tumbler where clothes are placed for drying. It rotates during the drying cycle to tumble clothes through heated air. Replace this assembly if the drum has cracks, holes, excessive wear marks, or if clothes are snagging or getting caught during operation.
Do-It-Yourself Stories from Customers like You
Dryer drum for kenmore 80 series gas dryer was chipped and snagging clothes Kurt G. • Aurora , CO • September 14, 2026
I replaced the drum. Along with replacing the belt and rollers. The belt shown wear and the rollers were worn down.
Read more
More
$233.95
- Compare At:
-
$275.65
- You Save:
-
$41.70
Genuine Whirlpool part
By: Whirlpool
Part Number: 279408
Seals the rear of the dryer drum to prevent hot air loss and ensure even drying. Replace when worn, cracked, or causing noise. Verify fit by model.
Do-It-Yourself Stories from Customers like You
Noisy 35 year old Sears Kenmore electric clothes dryer. Christopher L. • Whitefish Bay , WI • April 21, 2020
1) I spent a half-day researching online for possible causes for squeaks. Discovered the AppliancePartsPros YouTube videos, which were the best I found for clarity and ease of understanding.
2) I went from the videos to the website to locate each model-specific part that might have been causing the noise. Once I identified the parts for my model of dryer, I called customer service to confirm that I had the right ones before placing my order. I spoke with Sharon, who was very helpful and...
Read more
More
$48.46
- Compare At:
-
$57.67
- You Save:
-
$9.21
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 279771
This retainer clip secures a component in place to prevent movement and maintain proper alignment during appliance operation. Replacing a damaged or missing clip helps restore safe, reliable performance.
- Holds the mating part firmly to reduce vibration and noise
- Helps prevent intermittent operation caused by loose fitment
- Common fix when a component feels loose, rattles, or won't stay seated
What's included: 1 retainer clip Install notes:
- Disconnect power and shut off gas/water before servicing
- Note original clip orientation and location before removal
- Use needle-nose pliers to carefully release and install the clip
- Do not over-bend the clip; replace if deformed or fatigued
More
$9.70
- Compare At:
-
$11.64
- You Save:
-
$1.94
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 3400500
Replacement machine bolt for securing panels, brackets, and components in dishwashers, dryers, washers, and laundry centers. Restores fit if missing.
More
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 238614
Rubber bumper. Color: Grey.
More
$68.56
- Compare At:
-
$80.90
- You Save:
-
$12.34
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 799344
Color: White. Size: 1 qt. can. Acrylic appliance paint.
More
$174.30
- Compare At:
-
$207.42
- You Save:
-
$33.12
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 98460
$12.13
- Compare At:
-
$13.34
- You Save:
-
$1.21
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3352875
Black push-to-start knob for washers and laundry centers. Replaces cracked, broken, or missing control knobs. Installs on the control panel.
More
$1.57
- Compare At:
-
$1.88
- You Save:
-
$0.31
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98997
$9.49
- Compare At:
-
$10.44
- You Save:
-
$0.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 686889
Foam seal pad that cushions the dryer blower housing against the cabinet. Replace if cracked, compressed, or missing to restore proper fit and reduce vibration.
Do-It-Yourself Stories from Customers like You
Thermal fuse had blown and wire had melted as a result Benjamin S. • Portland , ME • July 02, 2018
I replaced the thermal cutoff kit and a heating element connection wire. Super simple and probably saved me over $100 if I had called a repairman. The videos on your site as well as the customer service person I spoke with were SUPER helpful. Thank you!!!
Read more
More
$23.61
- Compare At:
-
$27.86
- You Save:
-
$4.25
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 486146
Genuine Whirlpool part
By: Whirlpool
Part Number: 285508
Genuine Whirlpool part
By: Whirlpool
Part Number: 695547
This is the heater box only, does not include heating element.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3394196
Do-It-Yourself Stories from Customers like You
The motor on our clothes dryer was doing a "self protection" thermal or overload shutdown and there was a strong odor in the tub Jim S. • Fallon , NV • November 27, 2015
It took two repair attempts to fix the dryer. At first, I noticed that the rear felt seal was completely worn out, so I thought that extra friction between the tub and the rear panel might be causing the motor to have to work too hard and overheat. I ordered a new seal from appliancepartspros.com, and installed it according to their instructional video, but it did not correct the problem. Then I decided that the motor must be going bad, so I watched the on-line video on how to remove the...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3977746
Do-It-Yourself Stories from Customers like You
The lever to turn on dryer was broken the handle was broken and the latch was broken David R. • Jemison , AL • February 09, 2015
I opened the top of the dryer (after watching the video on your website) and replaced the lever on the switch. Removed two screws near the lint filter, used a putty knife to release fasteners under the top and raised the top. Held it in place with a short piece of board then removed the two screws holding in the switch and lever. Replaced the broken lever with the new one and put it all back together. The handle was a little more difficult as it took a lot more prying with a screwdriver to...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 3406812