Kenmore Range 362.73278690 (36273278690, 362 73278690) Parts
Genuine Ge part
By: Ge
Part Number: WB1K53
Mounting screw that secures the hinge assembly on electric and gas ranges. Replace this fastener if the original is stripped, missing, or damaged.
More
Genuine Ge part
By: Ge
Part Number: WB2K66
Right-side guide support secures sliding drawer or shelf rails on your range. Replace if cracked, broken, or worn to restore smooth tracking and alignment.
More
Genuine Ge part
By: Ge
Part Number: WB8K1
This bulb housing assembly holds and protects the light bulb inside your oven or range hood while providing electrical connections. It secures the bulb in the correct position and shields it from heat, grease, and food splatter during cooking. Replace this housing if the interior light doesn't work, bulbs burn out frequently, or the housing is cracked or damaged.
Do-It-Yourself Stories from Customers like You
Oven would not light David A. • San Jose , CA • December 14, 2017
Control board, new oven light fixture, and receptacle along with the gasket. All I ever ask is get me the correct parts and AppliancePartsPros.com came through. Used them before to fix my gas dryer.
Cheers, David
Read more
More
Genuine Ge part
By: Ge
Part Number: WB2K65
Secures the gas safety valve to the chassis. Replace if worn, bent, broken, or missing to maintain proper valve alignment and stable positioning.
More
Genuine Ge part
By: Ge
Part Number: WB34K5
Protective wire cover for range burner igniter wires. Replaces cracked, broken, or missing covers. Shields wiring from damage inside the range cabinet.
Do-It-Yourself Stories from Customers like You
Degraded burner igniter wires Richard W. • Bakersfield , CA • August 19, 2016
Checked online instructions for range top ands rear upright removal. Cleaned inside surfaces before removing individual wires one at a time. Ran the new wires through retainers first, then to the correct igniters next. Replaced removed parts to restore.
Note: The remove the top burner screws from the cook top before trying to remove it. Otherwise, you will bend the burner gas supply tubes and possibly damage them if not done in sequence.
Utube mentioned using a screwdriver for the cook top...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB63K3
Genuine Ge part
By: Ge
Part Number: WB2X9154
Oven won't heat or takes too long to preheat? A faulty igniter is the most common cause. This round-style gas range igniter is a 15-30 minute DIY fix.
This part fixes the following symptoms
-
Little to no heat when broiling
-
Little to no heat when baking
-
Won't start
-
Gas igniter glows, but will not light
See more...
Do-It-Yourself Stories from Customers like You
Bake oven would not heat up no glow from bottom oven igniter top oven broiler heats Vicente T. • Fort Wayne , IN • February 19, 2016
There are two igniters in oven, one for top broiler and one for bake oven at bottom. Your website help me troubleshoot the problem and locate the part. ordered part was delivered the next day. Following the instructions that others on your website had provided, the repair was quick and SUCCESSFUL.
No need to pull out oven as power cord can be accessed from removing bottom storage drawer.
Step 1: Remove the storage drawer from below the oven and disconnect the power cord from inside. No need...
Read more
More
$94.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB21K12
Fix a burner that won't light, leaks gas, or has a broken control stem. This gas valve regulates flow to one cooktop burner. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Broken gas valve on gexl44 Diana F. • Fairfield , IA • July 18, 2014
Shut off gas. Order part from your helpful (on Sunday afternoon) telephone person. Get part in two days. Replace part.
Read more
More
$89.44
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB1X119D
$13.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB01K10093
This speed nut is a clip-on fastener that provides threads for a screw on the appliance. It secures sheet-metal panels, brackets, or trim and helps keep assemblies tight under vibration and repeated use.
- Provides captive threads so a screw can tighten into thin sheet metal
- Helps secure panels, brackets, and trim pieces in place
- Replace if a screw spins without tightening, a panel rattles/feels loose, or the original clip is missing or damaged
- Restores a snug, reliable attachment point without a loose nut
What's included: One speed nut Install notes:
- Disconnect power and, if applicable, shut off gas; allow the appliance to cool before servicing
- Note the clip's orientation; slide it onto the panel edge or stud as designed
- Start the screw by hand to avoid cross-threading; do not overtighten
- Wear cut-resistant gloves when handling sheet-metal parts
More
$7.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB48K2
Slotted grid that rests over the broiler pan to support food during broiling. Replace if cracked, warped, worn, or missing to restore proper function.
Do-It-Yourself Stories from Customers like You
Needed a new broiler pan assembly Ken M. • Auburn , CA • January 03, 2021
The fix isn't as important as my ording experiance. Thank you to AppliancePartsPros.com. "Great,Outstanding Service", best I have experienced yet. Online ordering was a breeze and same day shipping turned a forcasted 8 day delivery into only 3, with standard shipping no less, FedEx. Easy to navigate web experience which made the process painless. I highly recommend AppliancePartsPros.com for any Appliance needs. Thank you so very much. Ken M. Auburn Ca.
Read more
More
$38.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB1K5
Size: 8-18 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Oven not lighting John D. • Orlando , FL • January 16, 2024
We replaced the igniter. To do the job right you need to pull the oven off the wall (this was the 6 burner with griddle dual oven). you need to get to the igniter plug by taking off the entire back.... easier than it sounds... the hardest part is sliding the stove out and back in... I only need a 1/4 in driver for the whole job.... it is easier if you take the oven doors off...
Read more
More
$9.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB34K10086
Stamped metal shield that protects the oven's lower cavity and insulation from excessive heat. Replace if cracked, rusted, corroded, or damaged.
More
$113.46
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB32K5
Do-It-Yourself Stories from Customers like You
Oven would not light David A. • San Jose , CA • December 14, 2017
Control board, new oven light fixture, and receptacle along with the gasket. All I ever ask is get me the correct parts and AppliancePartsPros.com came through. Used them before to fix my gas dryer.
Cheers, David
Read more
More
$11.38
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB14K2
Left side oven rack guide holder for gas ranges. Replaces broken, cracked, or missing guide holders that secure oven rack slides in position.
More
$6.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB1K44
The range latch screw is a small fastener used to secure the door latch mechanism or latch strike plate firmly to the range frame. It keeps the latch components from shifting or loosening over time with repeated use. Replace this screw when the original is stripped, missing, or corroded, causing the latch assembly to feel loose or the oven door to not close securely.
Do-It-Yourself Stories from Customers like You
Oven lock failed so self cleaning unit would not engage Alice L. • Martinez , CA • September 17, 2018
Replaced old lock and installed replacement lock and now have a happy wife.
Read more
More
$10.51
Out Of Stock
Usually ships within 4 - 14 days