Kenmore Range 362.75205891 (36275205891, 362 75205891) Parts
Genuine Ge part
By: Ge
Part Number: WB53K4
$93.95
- Compare At:
-
$94.29
- You Save:
-
$0.34
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB55K6
$161.14
- Compare At:
-
$178.32
- You Save:
-
$17.18
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB63K2
$19.95
- Compare At:
-
$29.04
- You Save:
-
$9.09
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB63K21
Back panel for gas ranges. Installs on the rear exterior of the unit. Replace if the original panel is cracked, dented, rusted, or missing.
More
$56.11
- Compare At:
-
$61.72
- You Save:
-
$5.61
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB63K24
$31.95
- Compare At:
-
$32.14
- You Save:
-
$0.19
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB63K25
$17.67
- Compare At:
-
$20.03
- You Save:
-
$2.36
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB63K31
Frame weld for gas ranges. This structural component supports the range cabinet. Replace if cracked, broken, or damaged during repair work.
More
$93.78
- Compare At:
-
$148.53
- You Save:
-
$54.75
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WB8K1
Do-It-Yourself Stories from Customers like You
Oven would not light David A. • San Jose , CA • December 14, 2017
Control board, new oven light fixture, and receptacle along with the gasket. All I ever ask is get me the correct parts and AppliancePartsPros.com came through. Used them before to fix my gas dryer.
Cheers, David
Read more
More
Genuine Ge part
By: Ge
Part Number: WB1K66
This part has been discontinued and is no longer available.
More
Genuine Ge part
By: Ge
Part Number: WB13K25
The Spark Module is an OEM replacement part for GE gas ranges. It is responsible for generating electric sparks to ignite the gas burners on the cooktop. The spark module produces consecutive sparks when a surface burner knob is turned on, which ignite the gas mixture and allows the burner flame to ignite safely and consistently.
Causes of a bad spark module can include faulty electrodes, worn internal components that hamper sparking, or damage due to moisture intrusion or power surges over time.
Symptoms of a bad spark module include:
- Burners that will not ignite or only intermittently ignite
- Flashback or burning above the burner head
- The smell of gas when turning burners on
This GE replacement part is also compatible with models from Hotpoint, RCA, and certain Kenmore gas ranges.
Do-It-Yourself Stories from Customers like You
GE Gas Cooktop Wouldn't Light Michael S. • Owasso , OK • March 17, 2014
My problem was intermittent spark and then no spark. My first fix was to give my wife one of those long BBQ grill lighters but after about a week she told me to "FIX IT". After researching the problem on the internet I determined it was likely one of three things: IGNITERS (not likely), SWITCHES (possible), or SPARK MODULE (most likely). I ordered the Spark Module on Sunday night and it arrived on Tuesday. I was totally surprised by the speed of delivery. Took about 30 minutes to install and...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB18K10035
Harness connects spark module to burner igniters on gas ranges. Replace if wires are frayed, cracked, burned, or damaged to restore reliable ignition.
Do-It-Yourself Stories from Customers like You
2 of the ignitors would not spark wires were frayed by ? mice Paul F. • Hernando , MS • July 26, 2014
The only issue I had was that I had ordered spark igniters the week prior after watching your repair video which showed the spark igniters with wires attached. When the ignitors arrived, there were no wires, so I ordered this harness which actually fixed the problem with having to open the igniters.
I am now trying to return the igniters, but I can't do it without the serial number from my appliance, which I did not use the order the parts, I now have to make a trip back up to my rental unit...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB2K20
Anti-tip bracket kit installs to the floor behind your range or wall oven to prevent tipping. Replace if missing, damaged, or moving to a new home.
More
Genuine Ge part
By: Ge
Part Number: WB49K2
Do-It-Yourself Stories from Customers like You
Burned on pans Cheryl R. • Piney Creek , NC • October 30, 2015
New pans
Read more
More
Genuine Ge part
By: Ge
Part Number: WB7K5338
Do-It-Yourself Stories from Customers like You
End caps for oven door had broken and kept falling out Barbara L. • Roanoke , VA • January 05, 2019
Somewhat difficult to slide back on because pieces of the old tabs were stuck in the crevace, but once I realized and fished them out the next challenge was finally figuring out part went inside the crevace and part (a tab) went outside on the back of the handle. If you bend over and look up underneath it is easy to see how it goes, but apparently over the years the handle had gotten just out of shape enough that the caps did not readily slide on. Be careful you don't snap a tab or post off. ...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB7K5339
This handle cap is a replacement end cover that restores the clean finished look and protects the handle mounting on compatible refrigerators. It keeps the handle edges covered and helps prevent snags and cosmetic damage. What it does:
- Covers and protects the exposed end of a refrigerator door handle for a finished appearance
- Conceals handle mounting hardware and reduces dirt build-up around the handle area
- Helps prevent clothing snags and minimizes wear at the handle end
- Matches light white finish to blend with white appliance trim
What's included:
Install notes:
- Remove original cap by following the appliance manual; some models use hidden clips or a retaining screw
- Keep existing mounting hardware — this cap is a cosmetic cover and typically uses factory fasteners
- Avoid over-tightening clips or screws to prevent cracking the cap
Do-It-Yourself Stories from Customers like You
End caps for oven door had broken and kept falling out Barbara L. • Roanoke , VA • January 05, 2019
Somewhat difficult to slide back on because pieces of the old tabs were stuck in the crevace, but once I realized and fished them out the next challenge was finally figuring out part went inside the crevace and part (a tab) went outside on the back of the handle. If you bend over and look up underneath it is easy to see how it goes, but apparently over the years the handle had gotten just out of shape enough that the caps did not readily slide on. Be careful you don't snap a tab or post off. ...
Read more
More
Genuine Ge part
By: Ge
Part Number: WB10K13