Kenmore Range 362.75206893 (36275206893, 362 75206893) Parts

Genuine Ge part

Range Spark Ignition Wire Harness

By: Ge

Part Number: WB18K10035

Harness connects spark module to burner igniters on gas ranges. Replace if wires are frayed, cracked, burned, or damaged to restore reliable ignition.

Do-It-Yourself Stories from Customers like You 2 of the ignitors would not spark wires were frayed by ? mice Paul F. • Hernando , MS • July 26, 2014

The only issue I had was that I had ordered spark igniters the week prior after watching your repair video which showed the spark igniters with wires attached. When the ignitors arrived, there were no wires, so I ordered this harness which actually fixed the problem with having to open the igniters. I am now trying to return the igniters, but I can't do it without the serial number from my appliance, which I did not use the order the parts, I now have to make a trip back up to my rental unit... Read more

Genuine Ge part

Broiler Pan

5.0 (2)

By: Ge

Part Number: WB49K2

Do-It-Yourself Stories from Customers like You Burned on pans Cheryl R. • Piney Creek , NC • October 30, 2015

New pans Read more

Genuine Ge part

Handle Cap - Rt (Wh)

4.0 (1)

By: Ge

Part Number: WB7K5338

Do-It-Yourself Stories from Customers like You End caps for oven door had broken and kept falling out Barbara L. • Roanoke , VA • January 05, 2019

Somewhat difficult to slide back on because pieces of the old tabs were stuck in the crevace, but once I realized and fished them out the next challenge was finally figuring out part went inside the crevace and part (a tab) went outside on the back of the handle. If you bend over and look up underneath it is easy to see how it goes, but apparently over the years the handle had gotten just out of shape enough that the caps did not readily slide on. Be careful you don't snap a tab or post off. ... Read more

Genuine Ge part

Handle Cap (Light White)

4.0 (1)

By: Ge

Part Number: WB7K5339

This handle cap is a replacement end cover that restores the clean finished look and protects the handle mounting on compatible refrigerators. It keeps the handle edges covered and helps prevent snags and cosmetic damage. What it does:

Covers and protects the exposed end of a refrigerator door handle for a finished appearance
Conceals handle mounting hardware and reduces dirt build-up around the handle area
Helps prevent clothing snags and minimizes wear at the handle end
Matches light white finish to blend with white appliance trim

What's included:

One handle cap

Install notes:

Remove original cap by following the appliance manual; some models use hidden clips or a retaining screw
Keep existing mounting hardware — this cap is a cosmetic cover and typically uses factory fasteners
Avoid over-tightening clips or screws to prevent cracking the cap

Do-It-Yourself Stories from Customers like You End caps for oven door had broken and kept falling out Barbara L. • Roanoke , VA • January 05, 2019

Genuine Ge part

Support Rivet

By: Ge

Part Number: WB10K13

Right hand side

Genuine Ge part

Door Spring Hook

By: Ge

Part Number: WB2K11

Genuine Ge part

Burner Valve

5.0 (1)

By: Ge

Part Number: WB21K20

Do-It-Yourself Stories from Customers like You Bab gas valve Robert S. • East Northport , NY • November 21, 2016

Ordered replacement valve from ApplianceParts.com and reapired it myself. Read more

Genuine Ge part

Top Burner Valve Switch

By: Ge

Part Number: WB24K10003

This valve switch includes a gray hub and sparks at the 7 o'clock position. For the orange hub valve switch order WB24K10002.

Genuine Ge part

Retainer Clip

5.0 (2)

By: Ge

Part Number: WB2X1082

Clip for door hinge.

Do-It-Yourself Stories from Customers like You Broken door hinge. Shari W. • Evansville , IN • February 07, 2018

By replacing the hinge. Read more

Genuine Ge part

End Cap Screw (White)

5.0 (1)

By: Ge

Part Number: WB01K10004

Color: White. Mounting screw for end caps.

Do-It-Yourself Stories from Customers like You Needed to replace two screws that were rusted Russell S. • Jefferson , GA • May 22, 2020

Replaced screws, would have liked to replace discolored plastic end plates but not for $35 to $40 dollars per end cap. Read more

Genuine Ge part

Knob - Top Bur

By: Ge

Part Number: WB03K10013

Genuine Ge part

Range Oven Door Hinge Pin

By: Ge

Part Number: WB14K5

Pivot pin that connects the oven door hinge to its mounting bracket. Replace if worn, broken, or missing to restore smooth door operation and alignment.

Genuine Ge part

Range Burner Orifice Spud

5.0 (4)

By: Ge

Part Number: WB28K10029

Gas burner orifice spud for range cooktop conversion between LP and natural gas. Replace when converting fuel types or if missing or damaged.

Do-It-Yourself Stories from Customers like You Propane to natural gas conversion on range and dryer Vincent P. • Howell , NJ • October 09, 2014

Confirmed parts needed through online chat with tech and followed video instructions for dryer conversion. Found a video online for range conversion. Replaced orifices for stove top and adjusted oven burner orifices and air shutters and inverted pin in pressure regulator to natural gas position. All went well with no problems, about an hour and a half to gather tools and complete both jobs. Probably could be done faster but I was taking my time. Read more

Genuine Ge part

Panel, Oven Bottom

5.0 (6)

By: Ge

Part Number: WB53K35

Do-It-Yourself Stories from Customers like You The panel on the oven bottom was pitted and needed to be replaced Kenneth W. • Buffalo , MN • November 29, 2014

Simple as can be. Took 2 screws out, pulled out the old panel, and put the new one in. Done in five mintures Read more